Belwith self-close full overlay hinge describes a concealed cabinet hinge designed so the door covers all of the cabinet wall, which creates a full overlay look that hides the cabinet side in finished installations. The hinge is identified as a frameless style, meaning it is matched to cabinets that do not have a face frame, which matters when a shop standardizes drilling patterns across a frameless line. The product is a European standard concealed hinge, so the mechanism is hidden from view when the door is closed and keeps the exterior lines of the cabinet clean for residential or commercial projects. The hinge is described as self-close, so the internal spring pulls the door shut at the end of travel, which helps doors sit consistently against the case without manual pushing every time. The manufacturer part number P5107-14 gives a precise reference when reordering or matching to existing layouts built around this specific hinge.
The hinge is called a slide-on full overlay hinge, which means the installer slides the hinge arm onto its mounting interface during installation, helping speed up mounting when hanging multiple doors in a run. The frameless designation confirms that the hinge geometry is tailored to cabinet boxes without a face frame, which affects drilling locations and how the door overlays the side panel. The 105 degree opening angle defines how far the door swings from the closed position, so planners can judge clearance around corners or tall appliances. Because it is a self-close design, the hinge applies closing force near the end of travel, drawing the door shut and promoting even reveals when the shop sets hinge positions consistently. The concealed cabinet hinge classification indicates that once mounted inside a cabinet, the hardware remains out of sight when the door is closed, supporting clean-lined casework.
The product description notes that this slide-on full overlay hinge is typically used at the end of cabinet runs, meaning it is chosen when the door needs to cover the exposed side of the last cabinet in a sequence. Because it allows the door to cover all of the cabinet wall, it can visually finish a row of frameless cabinets so that the side panel is hidden behind the door edge. The European standard concealed hinge classification ties it to European-style cabinets, which often rely on consistent drilling patterns and overlay values, supporting repeatable layouts across kitchens, vanities, or office casework built from frameless boxes. As a concealed cabinet hinge, it sits inside the cabinet when the door is closed, which keeps the focus on door style and handle selection rather than visible hinge hardware. The polished nickel finish gives the exposed hinge edges a coordinated look with other polished nickel fittings, which matters on cabinets where the hinge edge may be visible when doors are open.
The full overlay behavior, where the door covers all of the cabinet wall, supports consistent end-of-run terminations, because the same hinge geometry can be applied anywhere an exposed cabinet side would otherwise show. The frameless hinge classification means fabricators working in 32 mm or similar systems can align this hinge with existing boring patterns, reducing layout changes between jobs. The 105 degree opening angle provides a fixed and known swing, which simplifies design decisions near corners since the door arc is limited and predictable. The self-close function encourages doors to settle into the same closed position each time, which helps reveals look even along a bank of cabinets when hinge positions are set accurately. The steel material gives the hinge arm and mechanism a sturdy base for the concealed action, which is helpful in everyday environments where doors see frequent use. The polished nickel finish identified in the description provides a smooth metallic surface that visually matches other polished nickel cabinet components, which can streamline finish selection across hinges, pulls, and knobs in the same space.
The hinge is described as frameless, so it matches cabinets built without a face frame, allowing the door to overlay directly on the cabinet wall in European-style casework.
The hinge has a 105 degree opening angle, so the door swings a little past perpendicular to the cabinet front, which helps balance access with corner and wall clearances.
Full overlay in the description means the door covers all of the cabinet wall, hiding the side panel edge and giving a continuous front appearance along cabinet runs.
The description notes it is typically used at the end of cabinet runs, so it is applied where an exposed cabinet side would otherwise remain visible.
The hinge is made from steel with a polished nickel finish, giving a sturdy base metal and a bright metallic appearance that matches polished nickel cabinet hardware.
The manufacturer part number is P5107-14, which identifies this specific Belwith Keeler self-close full overlay frameless concealed hinge for matching and reordering.
This hinge is a Belwith Keeler concealed cabinet hinge built as a slide-on full overlay frameless model with a 105 degree opening angle, so it aligns well with European-style casework layouts. Because it allows the door to cover all of the cabinet wall and is typically used at the end of cabinet runs, it suits projects where clean, continuous fronts are important. The steel construction with polished nickel finish ties structural performance to a coordinated metal look that matches polished nickel hardware suites across a room. For jobs built around the Belwith self-close full overlay hinge geometry, the P5107-14 part number gives a direct path to selecting the same hinge again whenever expanding or replicating an existing cabinet installation.