Magnetic Catches 1-7/16" Center to Center from Belwith Keeler are two piece magnetic catches that securely close doors together with a magnetic force, so doors stay shut without adding complex latching hardware. The catch is part of the Belwith Keeler Catches collection, which keeps it aligned with other catch solutions in the same line for consistent hardware choices on a project. The product sits in the Locks and Latches category under Catches, so it fits typical cabinet and casework closure needs where a simple magnetic hold is preferred. A cadmium finish on the catch provides a metallic appearance that visually matches other cadmium finished components in a build. The material construction is described as various materials, which supports a practical mix of components to deliver the magnetic holding function in a compact form.
The 1-7/16" center to center dimension on this magnetic catch gives an exact mounting spread, which streamlines marking and drilling when positioning the catch on a cabinet or door stile. With a projection of 1/2", the catch stands off the surface just enough to allow the mating piece to engage the magnet, which supports consistent door closure without over-travel. The 1-3/4" width supplies a broader base, which helps distribute stress across the mounting surface in everyday open-and-close cycles. A 5/8" length or diameter keeps the catch compact front to back, which makes it easier to place the hardware where interior space is limited. As a two piece magnetic catch, the paired components are designed to meet in alignment, which supports repeatable closure and reduces the chance of the door sitting proud when shut.
This two piece magnetic catch from the Belwith Keeler Catches collection is suited to cabinet and similar door applications where a magnetic force is desired to bring doors together and hold them closed. Because it resides in the Locks and Latches category under Catches, it aligns with typical cabinet, furniture, or casework closures that do not require keyed locking. The 1-7/16" center to center mounting dimension fits layouts that follow that specific spread, which helps it drop into designs calling for that spacing. Its 1-3/4" width allows the catch to sit comfortably on common cabinet rails or frames, providing enough bearing area for mounting while staying within the edges of standard framing members. The compact 5/8" length or diameter means the catch occupies minimal depth, which suits shallow cabinets or enclosures where interior clearance is limited behind the door.
The 1-7/16" center to center spacing on this magnetic catch defines the exact distance between mounting locations, which aids repeatable drilling jigs and speeds layout when multiple catches are installed across a run of doors. The 1/2" projection controls how far the working face of the catch stands off the mounting surface, which helps align the magnet with the mating piece so the door closes flush instead of being pulled too deep or sitting short. A 1-3/4" width spreads contact over a larger section of the frame or door, which can improve stability of the catch under the push and pull of normal operation. The 5/8" length or diameter keeps the catch relatively small, which reduces interference with interior shelving or stored contents in a cabinet. The cadmium finish on the catch provides a consistent surface appearance, which helps the hardware present a clean, finished look when visible at the cabinet edge.
The P109-2C magnetic catch is a two piece magnetic catch from Belwith Keeler that uses magnetic force to securely close doors together, which suits typical cabinet and casework door applications.
The magnetic catch has a 1-7/16" center to center dimension, which defines the mounting hole spacing and supports accurate drilling and alignment on doors or frames.
The Belwith Keeler magnetic catch has a width of 1-3/4", which provides a stable mounting base on common cabinet rails, stiles, or carcass members.
The two piece magnetic catch has a projection of 1/2", which sets how far it extends from the mounting surface so the magnet engages properly with the mating piece.
The magnetic catch has a cadmium finish, which offers a consistent metallic appearance that coordinates with other cadmium finished hardware.
The magnetic catch has a length or diameter of 5/8" and a width of 1-3/4", which keeps it compact while still providing a practical mounting footprint.
The Belwith Keeler Magnetic Catches 1-7/16" Center to Center, Cadmium Catch combines a defined 1-7/16" center to center mounting dimension, 1-3/4" width, 1/2" projection, and 5/8" length or diameter to support straightforward layout on cabinet or similar doors. As a two piece magnetic catch designed to securely close doors together with magnetic force, it serves everyday closure needs in the Locks and Latches Catches category. For cabinet or casework projects that call for a compact catch with cadmium finish and clear dimensions, this P109-2C magnetic catch from the Catches collection provides a straightforward hardware choice.