Magnetic cabinet door catch from Belwith Keeler uses a magnet to help keep cabinet doors closed, which supports consistent door alignment in everyday use. As part of the Catches collection, it serves as a practical latching solution where a simple magnetic hold is preferred. The P650-W model belongs to the Locks and Latches category, so it fits naturally wherever a basic catch is needed in cabinetry. A white finish coordinates with light-colored cabinets or trim, allowing the catch to sit visually in the background once installed. Its compact 3/4 inch length helps it fit in tight door or frame spaces, while still delivering magnetic hold for the door. A 5/8 inch projection brings the magnetic contact toward the door, which supports positive engagement between the door and the catch body.
The 1-1/2 inch center to center dimension sets the spacing between the mounting points, giving installers a clear measurement when drilling pilot locations for the catch. With a 3/4 inch overall length or diameter, the catch fits in compact areas on cabinet frames or shelves without demanding much linear space. A 5/8 inch projection determines how far the working face stands off the mounting surface, which helps align the magnet with the contacting strike point on the door. The 1-3/4 inch width defines how much lateral space the catch body occupies, which is useful when planning placement near hinges or face frame edges.
The white magnetic cabinet catch is specified for cabinet doors, so it suits face frame or frameless cabinet interiors where a magnetic latching point is desired. Its placement in the Locks and Latches category supports use in general woodworking and cabinet construction handled by professionals and serious DIY users. The Catches collection designation identifies it as part of a focused family of holding devices, which helps maintain consistency when the same type of catch is used across multiple cabinets in a project. The compact 3/4 inch length and 1-3/4 inch width allow it to be located on rails, cabinet tops, or side panels without crowding other hardware. A white finish helps it blend into light interiors, which is useful when cabinets have painted or white melamine surfaces and the hardware should remain unobtrusive once installed and the doors are opened.
The 1-1/2 inch center to center spacing gives a repeatable mounting reference, allowing the same drilling pattern to be used across multiple cabinets for consistent placement. A 5/8 inch projection positions the magnet at a known stand-off, which simplifies aligning the door-side strike point so that the magnetic faces engage reliably when the door closes. The 1-3/4 inch width increases the contact area with the cabinet surface, helping the catch stay stable over time as doors are opened and closed repeatedly. Being classified under the Catches product class clarifies that its primary function is magnetic holding, which reduces guesswork when selecting parts for a standard cabinet latching approach. The Belwith Keeler brand identification ties this model to an established hardware manufacturer, which supports standardization across projects where matching components by supplier is important.
The magnetic cabinet door catch is intended for cabinet doors, using magnetic force to help keep doors closed in everyday opening and closing cycles.
The 1-1/2 inch center to center measurement defines the distance between mounting points, guiding accurate drilling and repeatable placement across multiple cabinet openings.
The 5/8 inch projection indicates how far the catch extends from the mounting surface, helping align the magnetic face with the door strike area for consistent engagement.
The 3/4 inch length lets the catch fit in compact frame or panel spaces, allowing use on narrow rails, cabinet tops, or side panels without crowding nearby hardware.
The white finish coordinates with light-colored cabinet interiors, allowing the catch to visually blend into painted or white surfaces when doors are open.
The Various Materials specification indicates the catch uses different component materials, supporting both the structural body and magnetic function in one assembly.
The Belwith Keeler P650-W magnetic cabinet door catch combines a 1-1/2 inch center to center layout, 3/4 inch length, 5/8 inch projection, and 1-3/4 inch width to deliver a compact, defined mounting footprint. Its white finish aligns with light cabinet interiors, making it suitable for projects where hardware should stay discreet while still providing magnetic holding for cabinet doors.