tan plastic cabinet door catch from Belwith Keeler is a magnetic cabinet door catch designed to help keep cabinet doors closed in everyday use. The catch uses a magnetic action that holds the door against the frame, which reduces unintended opening during normal operation in residential or shop cabinets. The tan plastic finish helps this catch blend with light-colored cabinet interiors, so the hardware does not visually dominate when the door is open. With a width of 2 inches, the catch offers a stable mounting footprint on the cabinet frame, which helps distribute pull forces across a larger area during repeated door use. A projection of 1/2 inch allows the catch body to sit off the surface enough to meet typical cabinet door thicknesses while still keeping the overall profile compact inside the cabinet.
The 1-5/8 inch center to center measurement between mounting points provides a clear reference for drilling or marking cabinet frames, which helps speed installation when repeating the same layout across a run of cabinets. With a 2 inch overall width, the catch spans enough surface area on the frame or panel to sit solidly without crowding nearby hinges or edges. The 1-1/8 inch length and 1/2 inch projection work together to place the magnetic face in a practical position relative to the cabinet door edge, which supports reliable contact with the mating door surface during closing.
This magnetic cabinet door catch is identified by Belwith Keeler as part of the Catches collection, which places it within common cabinet hardware used to hold doors closed on cabinets and similar enclosures. The design as a magnetic cabinet door catch allows it to work on cabinet doors where a positive close is needed without a keyed lock, such as kitchen, bath, laundry, or shop storage units. Its 2 inch width and 1-1/8 inch length let it sit on typical face frames or cabinet partitions without overhanging edges, which helps maintain clean lines inside the casework. The tan plastic finish suits light interiors often used in cabinetry, which supports a consistent appearance when doors are open and hardware is visible during everyday access.
The 1-5/8 inch center to center spacing on this catch gives installers a fixed dimension to transfer from one opening to the next, which simplifies layout when many cabinet doors require the same catch position. A projection of 1/2 inch sets the working face of the catch off the mounting surface, which helps the magnetic contact align with common door overlays or inset arrangements within that range. The combination of 2 inch width and 1-1/8 inch length keeps the hardware compact while still providing enough surface area for stable anchoring, which is helpful on narrower rails or stile sections. The magnetic cabinet door catch function is specifically described as helping keep doors closed, which supports consistent door placement after closing and reduces door bounce in everyday cabinet use.
The P110-TP is a magnetic cabinet door catch from Belwith Keeler, which uses magnetic holding force to help keep cabinet doors closed during regular use.
This cabinet door catch has a 1-5/8 inch center to center mounting dimension, a 2 inch width, a 1-1/8 inch length, and a 1/2 inch projection for positioning on the cabinet.
The tan plastic finish provides a light, neutral look that blends with many cabinet interiors, which helps the catch remain unobtrusive when doors are open.
This magnetic cabinet door catch is used on cabinet doors where magnetic holding helps keep doors closed, such as kitchen, bath, or storage cabinets.
The 1-1/8 inch length keeps the catch compact from front to back, which fits well on narrower cabinet rails or limited-depth mounting surfaces.
The 1/2 inch projection positions the magnetic face away from the mounting surface, which helps the catch meet typical cabinet door edges during closing.
This Belwith Keeler tan plastic cabinet door catch with a 1-5/8 inch center to center mounting dimension offers a magnetic cabinet door catch solution that helps keep doors closed on cabinets. The 2 inch width, 1-1/8 inch length, and 1/2 inch projection work together to position the catch for reliable magnetic contact with the door edge in many cabinet layouts. For cabinet, woodworking, or shop projects that call for a compact magnetic catch in a light interior finish, this catch provides defined dimensions that support consistent layout across multiple openings.