Hickory Hardware 24" Soft-Close Side Mount Full Extension 100 lb Ball Bearing Drawer Slide, Zinc, P1055/24-2C

Soft-Close Ball Bearing Drawer Slides For Quiet, Full-Access Kitchen and Shop Drawers

This is a 24 inch full-extension side-mount ball bearing drawer slide from Hickory Hardware's 1055 series, rated 100 lb per pair, with an integrated soft-close damper that settles every drawer shut without a slam. The 24 inch length suits deeper kitchen base drawers, utility cabinets, and shop benches where full rear access matters.

Key Features

• Integrated soft-close damper catches the drawer near the end of travel and brings it to a quiet, controlled close.
• Full extension brings the entire drawer out to the cabinet face so the back of the drawer is fully reachable.
• 100 lb weight rating per pair handles loaded kitchen drawers, tool trays, and storage pulls.
• Steel ball bearings in full-length raceways deliver smooth, consistent travel under load across the full 24 inch stroke.
• Non-handed design means identical slides fit both sides of the drawer — no left/right sorting on the bench.
• 1/2 inch side clearance per side matches the standard side-mount fit so the slide drops into existing drawer-box layouts.

Where a 24 Inch Soft-Close Slide Earns Its Place

The 24 inch length is the go-to for deeper base cabinet drawers — pots-and-pans pulls, deep utility drawers, and cabinet shop storage where shorter slides leave the rear contents just out of reach. Full extension means the whole drawer clears the cabinet opening, not just most of it. Pair that with the soft-close damper and every close is quiet, whether the drawer is loaded with cast iron or nearly empty. For kitchen renovations where handle banging is a priority complaint, and for shop setups where a slamming drawer is a constant annoyance, this slide solves both problems without requiring a change in mount position or clearance from a standard BB slide.

Steel Construction With a Zinc Working Finish

The slide members are cold-formed steel with a zinc finish — the standard corrosion-resistant coating for indoor side-mount slides. Zinc is a functional finish on a component that sits beside the drawer box; it handles years of indoor cycling without surface breakdown. This is not a stainless or decorative finish, and it is not suited for wet or outdoor environments. The soft-close module is integrated into the slide body, so there are no add-on damper clips to lose during installation.

The Right Fit for Renovation, Production, and Retrofit Work

Cabinet shops running production kitchens will recognize the 24 inch length as a high-volume SKU — it fits the standard 24 inch deep base cabinet box and requires no special ordering for the majority of residential kitchen layouts. Designers specifying hardware for a quiet kitchen finish will find the soft-close damper delivers the expected premium feel. Contractors retrofitting existing drawers get a non-handed slide that installs the same way on both sides, cutting bench time. The 100 lb per pair rating covers virtually any residential kitchen drawer load, and the 1/2 inch clearance per side matches most existing drawer box dimensions without modification. Sold as a pair.

A Quieter Drawer in a Familiar Format

The 1055 series 24 inch soft-close slide gives kitchens and workspaces the closing quality of a premium drawer system without changing the mount position, clearance, or installation method of a standard side-mount ball bearing slide.