Hickory Hardware American Diner appliance pull gives you an 8 inch center to center handle that spans larger appliance or cabinet faces, which helps line up multiple fronts and delivers a consistent grip position across a run of doors or panels. The pull belongs to the Bistro collection, tying this piece into a defined design family so finished jobs can carry the same profile from appliances through surrounding cabinetry. It is made from zinc, which provides a solid metal body that machines cleanly and installs predictably in standard drilled cabinet or appliance panel holes. The stainless steel finish sits over that zinc construction, so you get the neutral stainless appearance that coordinates with many appliance fronts while keeping a uniform surface look from piece to piece. With this combination of size, material, and finish, the pull supports both visual alignment and everyday handling on heavier fronts.
The 8 inch center to center measurement sets a precise distance between mounting holes, so installers can layout and drill patterns that match this pull across appliance panels and adjacent cabinetry without field adjustments. With an overall length of 9-5/8 inches, the pull extends past the hole locations, which helps cover minor edge chipping around drill points and provides more leverage when opening heavier doors or panels. A 1-1/2 inch projection establishes how far the pull sits off the surface, creating clearance around raised door profiles while leaving enough space for a full hand grip. The 1-1/4 inch width affects how the pull sits visually on wider stiles, giving a defined bar that reads correctly on large appliance fronts. Using 8-32 x 1 inch screws ties into a common mounting thread, supporting straightforward installation into standard prepped holes in cabinet or appliance panels.
The P2146-SS appliance pull sits in the Appliance Pulls product class, which positions it for use on appliance panels and larger doors where a longer handle is required for leverage and scale. Its 8 inch center to center spacing aligns with layouts designed specifically for longer pulls, so this part fits projects that call for wider drill patterns on tall cabinet doors or built-in appliance fronts. At 9-5/8 inches overall length, the handle visually balances on full-height doors, helping proportion the hardware to the size of the panel instead of using shorter cabinet pulls that can appear undersized. The Bistro collection designation connects this pull to matching pieces, allowing a run of hardware around an appliance bay to share the same American Diner profile. With a stainless steel finish, the pull lines up visually with stainless-faced appliances, so the hardware reads as a natural extension of the door surface.
The fixed 8 inch center to center value on this Hickory Hardware American Diner appliance pull lets installers repeat drilling templates between appliance fronts and neighboring tall pantry doors, which reduces layout variation from one opening to the next. Its 1-1/2 inch projection provides a set standoff from the door or panel, keeping the grip area clear of door profiles or edge reveals so fingers can wrap the bar cleanly. With a 1-1/4 inch width, the pull offers a defined gripping edge that feels substantial across multiple openings, which helps users operate heavier panels with the same hand position every time. The stainless steel finish is applied consistently over the zinc body, so each P2146-SS appliance pull presents the same color tone across a bank of doors, supporting visually even hardware lines. As part of Belwith Keeler hardware, the use of a standard 8-32 x 1 inch screw thread aligns this piece with typical cabinet construction, aiding predictable fastening into prepared mounting points.
The P2146-SS appliance pull has an 8 inch center to center dimension, which sets the exact distance between mounting holes for drilling and layout.
The Hickory Hardware American Diner pull measures 9-5/8 inches overall, giving extra handle length beyond the hole spacing for grip and leverage on larger doors.
The appliance pull is made from zinc with a stainless steel finish, combining a solid metal body with a stainless appearance that coordinates with many appliance fronts.
The P2146-SS pull projects 1-1/2 inches from the mounting surface, leaving space behind the handle for fingers to wrap around the bar comfortably.
This appliance pull uses 8-32 x 1 inch screws, matching a common cabinet hardware thread that works with standard drilled mounting holes.
This stainless steel finish pull is part of the Bistro collection, aligning its American Diner styling with other matching hardware pieces in the same family.
The Hickory Hardware American Diner appliance pull in stainless steel finish gives you an 8 inch center to center layout, 9-5/8 inch overall length, and 1-1/2 inch projection that work together on larger doors and appliance panels. With zinc construction, a Bistro collection profile, and stainless presentation, the P2146-SS suits projects that pair stainless-faced appliances with coordinated hardware. For trade jobs or serious DIY work that call for consistent hole spacing, predictable grip clearance, and a defined American Diner look, this Belwith Keeler appliance pull from Wurth Baer Supply provides a clear, spec-backed option to match your design and drilling plan.
Sold In: 1 Each