Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Williamsburg appliance pull is a 24 inch center to center cabinet pull designed for projects that call for a long, continuous grip across doors or drawers. The pull belongs to Hickory Hardware's Williamsburg collection, so it delivers a consistent style match anywhere that collection is specified across a job. The pull is made from zinc, which creates a solid-feeling handle that installs cleanly on standard cabinet materials. A stainless steel finish on the zinc body presents the look of stainless steel, which supports visual alignment with stainless-front appliances and other stainless-finished hardware in the same space. The center to center dimension of 24 inches provides a wide handhold that works well across larger cabinet faces. A listed length of 24-7/8 inches means the ends extend slightly beyond the drill points, which helps cover minor layout variations along the mounting line.
The 24 inch center to center dimension on this Hickory Hardware Williamsburg pull gives installers a fixed hole spacing that aligns with its appliance pull role. A length of 24-7/8 inches means layout lines can be set to the drill dimension while the extended ends visually frame the rail on the door or drawer. The projection of 2-7/16 inches defines how far the handle stands off the surface, so the hand clears typical face frames and fronts during pull action. A width of 1-5/16 inches sets the bearing surface against the cabinet, guiding the installer when orienting the pull straight along stile or rail references. The stainless steel finish over the zinc body presents a uniform surface, which supports clean sightlines when aligning multiple pulls across upper, base, or tall cabinet runs.
The 24 inch center to center pull format suits full-height cabinet doors or wide drawer fronts where a longer handhold is preferred. In a multipurpose room, the Williamsburg collection pull can be used on storage cabinets so the same handle spans utility doors and base cabinets, creating a single hardware line through the space. On storage drawers in a den, the extended 24-7/8 inch length can run close to the width of the drawer face, which gives users a broad grip zone across files or media drawers. The stainless steel finish lets this zinc pull sit visually alongside stainless-front appliances or stainless-look cabinet lines, so it can work on cabinetry that flanks appliances while keeping a unified appearance. The 1-5/16 inch width and 2-7/16 inch projection define a handle profile that suits repeated use on frequently accessed cabinets throughout the day.
The 24 inch center to center dimension on the K51-SS stainless steel pull standardizes boring for installers, so each cabinet face across a kitchen or workroom can share the same drill pattern for this hardware. Because the total length is 24-7/8 inches, the pull leaves a controlled overhang on either side of the mounting points, which can help visually center the handle on wider fronts while hiding slight measuring differences along the run. The zinc material provides a stable base for the stainless steel finish, which contributes to a solid hand feel during pull and push motions on heavier cabinet doors. The projection of 2-7/16 inches creates a defined stand-off, giving fingers space behind the rail whether the pull is mounted on tall pantry doors or horizontal drawers. With the Williamsburg collection identity, this pull can be specified wherever that series is used, helping designers and installers keep hardware style consistent from room to room.
The Hickory Hardware Williamsburg appliance pull uses a 24 inch center to center drilling dimension, which sets the exact spacing for boring mounting holes on cabinet doors or drawers.
The K51-SS stainless steel pull has a listed length of 24-7/8 inches, so it extends slightly beyond the 24 inch drill points to create a full-length grip across wider cabinet faces.
The Williamsburg collection appliance pull is made from zinc, which provides a solid handle body that supports a firm grip when opening or closing cabinet doors and drawers.
This 24 inch center to center pull has a stainless steel finish, giving the zinc body a stainless appearance that visually aligns with other stainless-finished elements in a room.
The Williamsburg appliance pull projects 2-7/16 inches from the cabinet face, creating space behind the handle so fingers clear the door or drawer surface during use.
The Hickory Hardware Williamsburg pull rail is 1-5/16 inches wide, establishing a defined gripping surface that helps hands locate the pull edge quickly on tall or wide fronts.
The Hickory Hardware Williamsburg Series 24 inch center to center stainless steel pull, model K51-SS, combines zinc construction with a stainless steel finish, so it suits projects calling for a long appliance-style handle on larger doors or drawers. With a 24 inch center to center drilling dimension and 24-7/8 inch overall length, it fits layouts that need a consistent extended rail across multiple cabinet faces. The 1-5/16 inch width and 2-7/16 inch projection define a comfortable, repeatable grip profile for daily use. For work that specifies Williamsburg collection hardware with a stainless look, this pull offers the dimensions and finish needed to keep a job aligned from cabinet to cabinet.