Hickory Hardware Williamsburg appliance pull gives you an 18 inch center to center span that works where you need a longer grip across cabinet doors or drawer fronts. The pull is part of the Williamsburg collection, so its design stays consistent when you are carrying this style through a room or an entire project. Made from zinc, it provides a solid metal body that holds up under regular cabinet use in busy areas. The black nickel vibed finish creates a dark metal look with a nickel tone that fits projects calling for a more modern or transitional style. With a total length of 18-7/8 inches, this pull covers a good portion of wider door stiles or drawer faces, helping visually balance larger fronts on appliance panels or storage cabinets.
This Hickory Hardware Williamsburg series pull uses an 18 inch center to center measurement, so hole drilling follows that exact spacing across the face. The 18-7/8 inch overall length means each end of the pull extends slightly beyond the screw centers, framing the mounting points with consistent overhang at both sides. With a 2-1/2 inch projection, the pull stands off the door or drawer far enough that fingers can wrap behind without contacting the surface during operation. The 1-3/8 inch width provides a fuller profile along the front, which affects how it lines up with stile widths or drawer rail heights when you are laying out hardware locations across multiple units.
The 18 inch center to center pull size targets appliance style doors and wider cabinet fronts, so it suits panels where shorter pulls could look underscaled. In the Williamsburg collection, this pull can be matched with other pieces from the same line for rooms that carry the same profile across base cabinets, tall units, and utility storage. The black nickel vibed finish pairs well with darker cabinet finishes and also contrasts lighter fronts, allowing it to fit projects that call for either subtle tone-on-tone or a darker linear statement. At 18-7/8 inches overall, this pull works on tall pantry doors, broad drawers, or decorative appliance fronts where a more substantial handle is preferred for grip and proportion.
The fixed 18 inch center to center dimension gives a repeatable drilling layout across multiple doors and drawers, which helps line up hardware rows on banks of cabinets. The 2-1/2 inch projection ensures a defined stand-off from the door or drawer, so hand clearance feels the same whether it is mounted on a wall cabinet, base cabinet, or tall panel. The 1-3/8 inch width means the pull reads as a substantial piece of hardware, helping it visually anchor heavier or wider fronts within a run. The black nickel vibed finish stays within the same tonal family as other black nickel items in a project, which supports a unified look when you are coordinating hinges, knobs, and other visible components. The zinc construction provides a metal base that accepts the black nickel vibed finish cleanly, which helps the finish appearance stay consistent from pull to pull on a job.
The Hickory Hardware Williamsburg appliance pull uses an 18 inch center to center measurement, so mounting holes are spaced 18 inches apart across the cabinet front.
The pull has an overall length of 18-7/8 inches, so it extends slightly beyond the 18 inch screw centers to frame the mounting points visually on the door or drawer.
The K50-BNV appliance pull is made from zinc, which provides a metal body that pairs with other metal decorative hardware on cabinet installations.
This 18 inch center to center pull has a black nickel vibed finish, giving it a dark nickel tone suited to matching black nickel cabinet hardware.
The black nickel vibed pull projects 2-1/2 inches from the surface, creating finger clearance behind the pull during everyday cabinet use.
The Williamsburg series pull has a width of 1-3/8 inches, giving a fuller gripping surface suitable for wider doors or appliance-style cabinet fronts.
The Hickory Hardware Williamsburg appliance pull from Belwith Keeler combines an 18 inch center to center layout with an 18-7/8 inch overall length for wide cabinet and appliance-style fronts. The zinc construction and black nickel vibed finish align with projects built around black nickel Williamsburg series decorative hardware. For cabinet runs needing a longer, 2-1/2 inch projection pull with a 1-3/8 inch width, this K50-BNV model delivers those specific dimensions so layouts and visual balance match the project plan.