Hickory Hardware Williamsburg appliance pull gives you an 18 inch center to center grip that spans wide cabinet or appliance-style fronts in one solid piece. The pull is part of the Williamsburg collection, so its design stays consistent across projects where a uniform look matters. Made from zinc, the pull provides a sturdy metal body that holds up under regular cabinet or drawer use in busy rooms. The oil rubbed bronze highlighted finish creates a dark base tone with lighter highlight areas, which helps the pull stand out visually against many cabinet colors. With a total length of 18-7/8 inches, the pull reaches across larger doors or drawer faces, helping distribute hand contact along a longer bar. A 2-1/2 inch projection sets the grip away from the surface, giving fingers room behind the bar. The 1-3/8 inch width offers a substantial feel along the hand contact area.
The 18 inch center to center measurement sets a clear drilling pattern for the mounting holes, which streamlines layout on new cabinet builds or replacements. With an overall length of 18-7/8 inches, installers can align the pull so the bar tracks cleanly with door edges or rail lines on wider fronts. The 2-1/2 inch projection controls how far the pull extends into the room, which helps balance clearance and profile when doors open near adjacent walls or appliances. A width of 1-3/8 inches defines the footprint of the pull across the door or drawer face, which affects how it visually fills stile or drawer front space. The zinc construction keeps the body weight manageable during handling and positioning, which supports straightforward installation on typical cabinet materials.
The Hickory Hardware Williamsburg collection is described as versatile, which positions this 18 inch center to center pull for use on cabinets in multipurpose rooms that combine storage and work areas. The same pull is also described for storage drawers in a den, so it fits into living or work spaces where a consistent style is desired across different furniture pieces. As part of the Williamsburg collection, this pull carries an easy style that adapts across these room types, helping installers keep one visual language from cabinets to drawers. The oil rubbed bronze highlighted finish suits these applications by providing a warm, traditional look that pairs with many wood tones common in dens and multipurpose spaces. Matching the 18-7/8 inch length to wider doors or drawer fronts in these rooms supports a balanced proportion from hardware to panel size, maintaining a clean finished appearance.
The defined 18 inch center to center drilling measurement allows repeatable hole placement across a bank of doors or drawers, which keeps pulls lined up from one front to the next. With the 2-1/2 inch projection set by the design, every installed pull stands off the face by the same distance, maintaining uniform hand clearance and a consistent side profile along the run. The 1-3/8 inch width keeps the grasp area the same on every cabinet, which helps users build a predictable feel as they move between doors and drawers. Zinc material keeps manufacturing consistent from piece to piece, so physical dimensions like length and projection remain aligned with the stated measurements. The oil rubbed bronze highlighted finish runs across the full pull body, tying each installation point together visually and supporting a coordinated hardware story throughout the space.
The Hickory Hardware Williamsburg appliance pull uses an 18 inch center to center mounting dimension, which sets the spacing between the two mounting points on the cabinet or drawer front.
The K50-OBH Williamsburg appliance pull has an overall length of 18-7/8 inches, so it reaches across wider cabinet doors or drawer fronts for a more substantial visual presence.
This oil rubbed bronze highlighted pull has a projection of 2-1/2 inches, setting the distance from the cabinet surface to the front of the pull for finger clearance.
The cabinet appliance pull has a width of 1-3/8 inches, which defines how much space it covers across the door or drawer face and how broad the hand contact area feels.
The Hickory Hardware Williamsburg pull is made from zinc, providing a metal construction suited to typical cabinet and drawer use in residential environments.
The K50-OBH appliance pull uses an oil rubbed bronze highlighted finish, giving a dark toned appearance with lighter highlights that pairs well with many cabinet colors.
The Hickory Hardware Williamsburg appliance pull with 18 inch center to center mounting gives you defined measurements for planning a cabinet or drawer run. With its 18-7/8 inch overall length, 2-1/2 inch projection, and 1-3/8 inch width, the pull lays out predictable hardware geometry across your installation. Zinc construction and the oil rubbed bronze highlighted finish tie appearance and structure together under one part number, K50-OBH. Sourcing this pull from Wurth Baer Supply places it within a broader cabinet hardware offering for your woodworking projects.