Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Cottage Series pull gives cabinets and drawers an 8 inch center to center grip that matches common appliance and door layouts, which helps keep a room visually consistent when you are updating multiple fronts. The satin nickel finish provides a modern, low-glare look, so the pull blends into both light and dark surfaces without drawing focus away from the door or drawer face. The pull length of 8-7/8 inches spreads the hand contact over a wider area, which feels substantial when opening heavier fronts. A projection of 2-3/8 inches spaces fingers away from the cabinet face, helping hands clear trim or door edges. The 7/8 inch width gives a solid bar thickness, which supports a confident grip on frequently used doors and drawers in busy rooms.
The 8 inch center to center measurement sets a clear drilling pattern for new cabinet work, which streamlines layout when spacing multiple pulls in a line. The 8-7/8 inch overall length shows the total bar span on the face, which helps position the pull so it stays clear of adjacent edges or moldings. A projection of 2-3/8 inches defines how far the pull stands off the surface, which is useful when planning clearances near adjacent walls or tall cabinet frames. The 7/8 inch width indicates bar thickness across the front, which helps with planning visually even proportions on narrow or wide drawer fronts.
This Belwith Keeler pull from the Chalet collection is designed for use on drawers or cabinets, which covers typical kitchen, bath, and furniture fronts in the same project. The 8 inch center to center layout suits wider fronts, which works well on appliance-style doors or broad drawers that benefit from a longer handhold. The satin nickel finish can be matched with existing cabinet hardware, which supports a room refresh by tying new pulls into current hinges or knobs. The pull length of 8-7/8 inches makes it proportionally suited to taller doors, which helps maintain visual balance when installed mid-rail or vertically along the stile. Because the pull works on both cabinets and drawers, one style can serve across multiple locations, which simplifies hardware selection for a full-room layout. The Cottage Series identity connects to a consistent design family, which supports continuing the same look on future cabinet additions or replacements.
The defined 8 inch center to center dimension allows repetitive drilling jigs to be set once, which helps installers keep fast mounting times and uniform spacing across an entire run. The 2-3/8 inch projection keeps the gripping surface consistently off the face, which maintains the same hand clearance when swapping out older pulls on multiple cabinets. The 7/8 inch width maintains a stable contact surface for fingers, which reduces the need to adjust grip position when users move between different doors and drawers. The zinc construction supports a solid-feeling bar, which aids in keeping alignment true when tightening fasteners through the pull into the front. The satin nickel finish provides a uniform surface across the length, which visually reveals straight alignment, helping installers quickly see if a pull sits level along a drawer edge. The consistent overall length of 8-7/8 inches lets installers align ends to reference points, which assists with repeating the same offset from edges throughout a room.
The pull uses an 8 inch center to center drilling pattern, which sets the spacing between holes for mounting on cabinet doors or drawers.
The pull has an 8-7/8 inch overall length, which helps it span more of the drawer or door front for a proportional look on wider fronts.
The pull has a 2-3/8 inch projection, which sets the stand-off from the cabinet face and provides finger clearance while opening fronts.
The pull is made from zinc with a satin nickel finish, which delivers a metallic appearance suited to many cabinet and drawer styles.
The pull can be used on drawers or cabinets in bathrooms or bedrooms, which supports consistent hardware across multiple residential spaces.
The pull is part of the Chalet collection with manufacturer part K60-15, which helps match it with related Belwith Keeler hardware pieces.
The Hickory Hardware Cottage Series pull with an 8 inch center to center layout offers a clear mounting pattern, which serves well when planning multiple cabinets and drawers. The satin nickel finish and 8-7/8 inch length give a unified look from piece to piece, which supports coordinated hardware across bathrooms, bedrooms, and other cabinet installations. With defined dimensions for length, projection, and width, this zinc pull provides the data needed to align drilling, layout, and style choices on your next cabinet or drawer project.
Sold In: 1 Each