Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Cottage 24 inch pull is a long cabinet and appliance handle designed around a 24 inch center to center mounting, so it spans wide doors or drawer fronts with a single, continuous grip point. The pull belongs to the Cottage collection by Hickory Hardware, giving it a consistent design language that coordinates across cabinets in bathrooms or bedrooms when the same series is used. Its stainless steel finish presents a neutral metallic look that matches many hinges and fixtures, which helps maintain a unified appearance across different pieces of decorative hardware. The pull is part of the Belwith Keeler brand line, tying it into a recognized decorative hardware family that covers handles and pulls. As a handle from the Decorative Hardware & Moldings category, it serves as a visible operating point on casework, allowing daily opening and closing without touching painted or finished surfaces.
The 24 inch center to center measurement on this Belwith Keeler pull fixes the distance between mounting points, so shop drawings and drilling jigs can be built around a known span for repeatable installation. Its 24-7/8 inch length or diameter dimension reflects the overall handle length, which matters when aligning multiple pulls along a bank of doors because the handle ends define the visual rhythm. With a 2-3/8 inch projection, the pull extends a predictable distance away from the cabinet face, which is useful when checking clearance to adjacent walls or neighboring doors. The 7/8 inch width sets the front bar dimension, informing how the pull sits relative to stile widths or rail heights on the cabinet design.
This Hickory Hardware Cottage Series 24 inch center to center stainless steel pull is specified for use on drawers or cabinets, so it can serve on both base and wall units within a room. The web description notes that it can be used in bathrooms or in bedrooms, which places it in typical residential cabinet environments rather than heavy industrial settings. As a pull from the Decorative Hardware & Moldings category and Handles and Pulls product class, it is meant to act as the primary touchpoint on case goods, providing a graspable element instead of operating doors by edges. The stainless steel finish on the zinc material delivers a specific look that coordinates with stainless-themed rooms, so a run of cabinets can visually tie into metal fixtures or appliances. Because its design is described as an easy match for current hardware, it supports situations where only select handles are changed while other pulls remain, helping renovations proceed in stages without full hardware replacement.
The defined 24 inch center to center spacing on this K63-SS pull means it can line up with existing 24 inch hole patterns on doors or drawer fronts, which simplifies replacement work when upgrading hardware on installed cabinets. Its 24-7/8 inch overall length gives installers a clear edge-to-edge dimension when checking that the handle will not extend past panel edges or conflict with neighboring pulls. The 2-3/8 inch projection offers a consistent offset that matters when doors open near walls or tall trim, supporting layout choices that keep handles from contacting adjacent surfaces during swing. With a 7/8 inch width, the pull provides a known front dimension that can be centered on narrow stiles or rails without overpowering the face proportion. The Cottage collection naming ties this pull to other Cottage line pieces, which helps designers maintain consistent styling when hardware from the same collection is used across multiple cabinet banks.
The Hickory Hardware Cottage 24 inch pull has a 24 inch center to center dimension, allowing straightforward drilling of two mounting points on wide cabinet doors or drawer fronts.
The K63-SS pull has a 24-7/8 inch overall length, so it spans a large portion of the door or drawer face and establishes a long visual line on the cabinet.
This Belwith Keeler Hickory pull projects 2-3/8 inches from the mounting surface, providing finger clearance while keeping the handle close enough for tight cabinet layouts.
The pull has a 7/8 inch width, shaping the front profile so designers can match it to stile widths and achieve the desired visual balance on the face.
The K63-SS appliance pull is made from zinc with a stainless steel finish, delivering the specified stainless look while using a zinc base material.
This Hickory Hardware Cottage collection pull is described for drawers or cabinets in bathrooms or bedrooms, fitting standard residential cabinet and furniture-style applications.
This Hickory Hardware Cottage Series 24 inch center to center stainless steel pull brings defined dimensions and a stainless steel finish to wide doors and drawers, supporting consistent layouts on cabinets in bathrooms or bedrooms. With its 24-7/8 inch overall length, 2-3/8 inch projection, and 7/8 inch width all clearly specified, it offers predictable sizing for shop drawings and field installation. For projects calling for a Belwith Keeler decorative handle in the Cottage collection, this K63-SS pull provides the stated measurements and appearance needed for coordinated cabinet hardware runs.