Hickory Hardware Cottage Series 18" (457 mm) Center to Center Stainless Steel Pull, - K62-SS

Hickory Hardware Cottage Series 18 Pull For Cabinets

Hickory Hardware Cottage Series 18 pull is a long cabinet and drawer handle designed for appliance-scale fronts where an 18 inch center to center layout is required. The pull length of 18-7/8 inches spans wider doors and drawers, giving large fronts a proportionate grip area that feels balanced during everyday use. A center to center dimension of 18 inches aligns with common drilling patterns on tall pantry doors and appliance panels, helping streamline layout across multiple fronts. The stainless steel finish coordinates visually with stainless-faced appliances, creating a consistent look from the hardware to the equipment surfaces. Constructed from zinc, this pull offers a solid-feeling handle body while allowing the Cottage collection design detailing to stay crisp at full 18 inch scale. As part of the Cottage collection, the style is intended for use on cabinets or drawers in multiple rooms, supporting a unified design across kitchen, bath, and other built-in storage.

Key Details Of This 18 Inch Appliance Pull

• The 18 inch center to center drilling dimension establishes a fixed mounting spread that suits wide cabinet doors and tall drawers, which simplifies planning handle locations on large panels.
• The 18-7/8 inch overall length gives extra bar coverage beyond the screw points, so hands naturally find a centered grip along the pull when operating heavier doors or drawers.
• The 2-3/8 inch projection from the mounting surface sets the handle out from the face, creating space for fingers behind the pull, which matters on thicker appliance panels and deep-front cabinets.
• The 7/8 inch width provides a substantial gripping surface without overwhelming the door stile, giving installers a handle profile that feels secure in hand yet remains visually controlled.
• The stainless steel finish presents a metallic appearance that pairs with stainless appliances and other stainless-finished hardware, keeping color and sheen consistent across the run of cabinets.
• The zinc material allows detailed Cottage collection styling at full appliance-pull length, giving fabricators and installers a decorative handle option that still reads clearly on large faces.

Mounting Dimensions And Handle Fit For Panels

The 18 inch center to center dimension defines the screw hole spacing for this handle, which directly drives drilling jigs and layout for new cabinet or appliance panels. With 18-7/8 inches overall length, the handle extends beyond the hole locations, giving a clear visual outline that helps align the pull parallel to door edges during installation. A 2-3/8 inch projection sets the handle away from door faces, which benefits doors with thicker edge profiles by keeping knuckles clear of the panel surface when pulling. At 7/8 inch width, the pull sits comfortably on common stile widths, allowing alignment along narrow or wide rails without crowding edge lines. These dimensions together support consistent mounting from cabinet to appliance fronts, so installers can repeat the same drilling pattern wherever an 18 inch center to center pull is specified.

Using This K62-SS Appliance Pull In Projects

Where This Cottage Collection Pull Performs Best

The product description states that this pull can be used on drawers or cabinets, in bathrooms or in bedrooms, which gives project planners flexibility to apply the same 18 inch center to center format across multiple room types. In kitchen projects, the 18-7/8 inch length suits tall cabinet doors or appliance panels where a longer handhold helps open heavier loads. In bath or bedroom built-ins, the same handle dimension can span wide drawers, bringing the Cottage collection look across storage banks. Because the design is described as an easy match for current hardware, this pull works in layouts where only select fronts move to an 18 inch appliance pull while other pieces in the space remain. The stainless steel finish supports this by pairing well with other stainless steel finish hardware, helping new pulls sit comfortably alongside existing pieces that share a similar finish family.

Why The Verified Dimensions Support Repeatable Results

The defined 18 inch center to center layout lets installers base drilling templates directly on the product spec, which reduces layout variation when repeating the pull across multiple doors and drawers. With an 18-7/8 inch overall length, the pull offers predictable edge clearances once centered on standard-width panels, helping maintain consistent visual margins from door edges. The 2-3/8 inch projection matters on appliance-scale fronts because it creates reliable clearance for fingers even when doors are recessed within face frames. A 7/8 inch width balances grip area with panel coverage, which helps keep the pull visually aligned with stiles or rails without overlapping neighboring trim. The zinc material and Cottage collection design work together so that, even at this extended length, the handle maintains its intended shape and profile along the full span, supporting a uniform appearance across every installed unit.

Common Questions About The K62-SS Appliance Pull

Selecting This Pull For Appliance-Scale Fronts

The Hickory Hardware Cottage Series 18 pull combines an 18 inch center to center layout with an 18-7/8 inch overall length, giving installers a consistent drilling pattern for large doors and drawers. The stainless steel finish, zinc material, 2-3/8 inch projection, and 7/8 inch width all work together to provide a handle sized for appliance-scale fronts while aligning with the Cottage collection style. For projects that call for a long stainless steel finish cabinet pull with defined dimensions and Cottage collection design, this K62-SS appliance pull is ready to integrate into cabinet and appliance panel plans.