Domino DF 700 EQ 8mm Cutter is a Festool carbide tipped bit for the Domino XL DF 700 Joiner, so every mortise is cut to match Festool tenons and projects stay consistent from piece to piece. The 8mm sizing creates the correct mortise width for Festool tenons, which keeps joints fitting properly without extra hand work on each opening. The bit is internally threaded, allowing quick, easy bit changes on the DF 700 EQ so tool setup stays efficient between different tenon sizes. Spiral flutes are built into the cutter to deliver clean cuts in the mortise, which helps joints seat tightly with less cleanup. This cutter is rated to withstand 5,000 to 14,000 joints, depending on material, so shops can run repeated Domino XL operations before scheduling a changeout.
The Festool Domino DF 700 EQ 8mm Cutter is internally threaded, so it threads directly to the Domino XL DF 700 Joiner drive interface and keeps the cutter securely located during use. This internal threading also supports quick, easy bit changes, which matters when alternating between different tenon sizes or replacing a worn 8mm cutter during a job. The spiral flutes help clear material as the mortise is cut, contributing to smoother feed as the joiner plunges and retracts. Because the cutter is sized to create the correct mortise width for Festool tenons, installers can rely on the Domino XL DF 700 Joiner settings to repeat the same fit across multiple parts with minimal adjustment.
The Domino DF 700 EQ 8mm Cutter is specified for the Domino XL DF 700 Joiner, tying the cutter directly to that joiner for mortise cutting. The cutter forms the correct mortise width for Festool tenons, so it supports building joints that follow Festool's Domino XL system in cabinet joinery and structural assemblies. The carbide tipped construction is rated for 5,000 to 14,000 joints, depending on material, giving capacity for repeated mortising in hardwoods or other sheet goods before replacement is needed. Because the cutter uses spiral flutes to create clean cuts, it is suited to jobs where mortise quality affects how well tenons seat during glue-up and clamping. The Festool branding and part number 497868 help shops reference the exact cutter when matching multiple Domino XL DF 700 stations.
The Festool carbide tipped cutting edges on this Domino XL DF 700 Joiner bit are engineered to withstand thousands of joints, from 5,000 to 14,000 depending on material, which supports predictable tool life planning around production runs. Spiral flutes guide chips out of the mortise as the joiner plunges, helping maintain cleaner mortise walls so Festool tenons can seat to full depth with consistent resistance. The internally threaded design connects the cutter securely to the DF 700 EQ drive while also allowing quick, easy bit changes, which reduces downtime when switching from this 8mm cutter to other Domino sizes. Because this cutter specifically creates a mortise width sized for Festool tenons, it works within the Domino XL system tolerances, supporting repeatable alignment between mating parts. Together, these details let the cutter maintain mortise quality and sizing across high joint counts, which is important wherever the DF 700 EQ is part of a regular cabinet joinery workflow.
The Domino DF 700 EQ 8mm Cutter is for the Domino XL DF 700 Joiner, so it mates with that machine to cut mortises within the Festool Domino XL system.
The Domino DF 700 EQ 8mm Cutter creates the correct mortise width for Festool tenons, supporting consistent fit when using matching Festool Domino tenons.
The Festool carbide tipped Domino DF 700 EQ 8mm Cutter is designed to withstand 5,000 to 14,000 joints, depending on material, supporting extended use between cutter changes.
The Domino DF 700 EQ 8mm Cutter uses internal threading for quick, easy bit changes on the Domino XL DF 700 Joiner, reducing changeover time while maintaining a secure connection.
The Domino DF 700 EQ 8mm Cutter has spiral flutes that produce clean cuts in the mortise, helping mortise walls stay smooth so Festool tenons seat accurately.
The Domino DF 700 EQ 8mm Cutter has manufacturer part number 497868, which helps match the exact 8mm cutter when ordering for Domino XL DF 700 Joiners.
The Domino DF 700 EQ 8mm Cutter from Festool, part number 497868, is built as a carbide tipped bit for the Domino XL DF 700 Joiner, so it aligns directly with that joiner in cabinet joinery setups. Its 8mm sizing creates mortise widths matched to Festool tenons, helping each joint follow the Domino XL system without extra fitting steps. Internal threading enables quick, easy bit changes on the DF 700 EQ, while spiral flutes support clean mortise cutting across thousands of joints. For shops standardizing on the Domino XL DF 700, this cutter gives a defined 8mm option to match projects that specify Festool tenons.
Sold In: 1 Each