Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Westerly appliance pull gives larger cabinet doors and panels a consistent, finished grip point using a 12 inch (305 mm) center to center layout, so installers can line up hardware across wide fronts without extra layout work. The pull length of 13-13/16 inches (351 mm) carries that line visually past the screw points, which keeps long doors looking proportional on tall pantry or appliance faces. A projection of 1-15/16 inches (49 mm) stands the hand clear of the surface, which helps when operating heavier doors or built-in appliance fronts. The 3/4 inch (19.6 mm) width balances that projection, so the pull feels substantial in the hand rather than sharp or narrow. With a Golden Champagne finish, the pull adds warm metallic tone that can coordinate with similar finishes across a project. Zinc construction gives a solid base material for this decorative hardware and supports routine use on active doors.
The 12 inch (305 mm) center to center Amerock Westerly appliance pull layout means installers can drill two mounting points on a single horizontal line, which streamlines drilling patterns on multiple tall doors. A base length of 1-3/16 inches (30 mm) at each end defines the footprint where the pull meets the surface, which helps when laying out reveals from door edges and stiles. The base width of 3/4 inch (19 mm) matches the body width, so the pull sits flush over the mounting area without extra overhang to account for during layout. With a projection of 1-15/16 inches (49 mm), the pull stands consistently off the face, which matters when coordinating with neighboring hardware or trim. The specified 10-24 x 3/4 inch screw size matches the pull threading, so installers can plan hole size and door thickness assumptions based on that fastener specification.
The Amerock Westerly Series Golden Champagne 12 inch (305 mm) center to center appliance pull is designed as part of the Westerly collection, which positions it for use wherever that collection appears on a project. Its appliance pull classification places it on larger panels such as appliance fronts or tall pantry doors that benefit from the 12 inch mounting span. The Golden Champagne finish lets it visually coordinate with other Golden Champagne Westerly pieces, so long runs of cabinets can carry the same finish and profile. With a 13-13/16 inch (351 mm) overall length, the pull suits wider or taller faces where a standard cabinet pull would look undersized. Zinc material construction fits decorative hardware and moldings applications where metal pulls are required across kitchens, built-ins, or other millwork.
The fixed 12 inch (305 mm) center to center spacing on the Amerock Westerly appliance pull BP54023BBZ lets installers build jigs or templates around a single dimension, which reduces layout time across banks of doors. Matching 3/4 inch (19.6 mm) grip width and 3/4 inch (19 mm) base width keep the pull footprint predictable, which can simplify aligning edges with rails and stiles. A 1-15/16 inch (49 mm) projection provides consistent hand clearance, which helps maintain the same feel from one door to the next regardless of location. The 1-3/16 inch (30 mm) base length at each end defines an easy reference for spacing off door corners or trim lines. With the Amerock Corporation Westerly collection design, installers can repeat the same visual language across multiple cabinets while relying on the same mounting geometry for each pull.
The Amerock Westerly appliance pull BP54023BBZ has a 12 inch (305 mm) center to center dimension, which sets the drilling distance for the two mounting points across the door or panel.
The Amerock Westerly Series Golden Champagne appliance pull measures 13-13/16 inches (351 mm) overall length, so it visually fills wider doors and tall fronts beyond the 12 inch mounting span.
The appliance pull projects 1-15/16 inches (49 mm) from the mounting surface, giving hand clearance between the grip and door face when opening heavier cabinet or appliance-style fronts.
The Westerly series 12 inch center to center appliance pull uses zinc construction, which provides a metal base suitable for decorative hardware and routine cabinet door use.
This Amerock Westerly appliance pull has a Golden Champagne finish, which delivers a warm metallic look that can coordinate with other Golden Champagne decorative hardware in the same space.
The appliance pull is specified with 10-24 x 3/4 inch screws, so mounting holes and panel thickness choices can be planned around that threaded fastener size.
The Amerock Westerly Series Golden Champagne 12 inch (305 mm) center to center appliance pull brings a defined 12 inch span, 13-13/16 inch (351 mm) length, and 1-15/16 inch (49 mm) projection to large doors needing substantial hardware. With matching 3/4 inch widths at the grip and base, zinc construction, and Westerly collection styling, it supports projects where consistent dimensions, coordinated finish, and appliance pull scale matter across cabinets and built-in fronts.
