Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Westerly appliance pull is a zinc appliance pull designed for appliance-scale doors where a larger grip is needed. The 12 inch (305 mm) center-to-center drilling spaces the fastening points widely, which spreads load across the door panel on heavier fronts. The polished nickel finish gives the pull a bright, reflective surface that coordinates with polished nickel appliances and trim, which simplifies visual alignment across a kitchen run. Overall length of 13-13/16 inches (351 mm) creates a substantial hand grip area, which helps when opening tall or wider appliance fronts. The Westerly collection design uses soft modern lines, which supports use on both traditional and more contemporary cabinet and appliance faces. Projection of 1-15/16 inches (49 mm) stands the pull off the surface, which leaves finger clearance behind the bar for a comfortable grasp.
The 12 inch (305 mm) center-to-center dimension defines the required hole spacing, which allows installers to layout drilling precisely on appliance or tall cabinet panels. The 13-13/16 inch (351 mm) overall length shows how much handle extends past those holes, which helps in planning clearances from panel edges, adjacent fronts, or trim. The 1-15/16 inch (49 mm) projection from the surface places the gripping area out from the door plane, which supports comfortable hand access even on thicker door profiles. Base length of 1-3/16 inches (30 mm) and base width of 3/4 inch (19 mm) give the footprint at each mounting point, which is useful when positioning the pull over stile widths or existing flat areas.
The Amerock Westerly appliance pull in polished nickel is intended for use on appliance pulls and similar large-scale fronts, where its 12 inch (305 mm) center-to-center span matches the proportions of wider doors. The polished nickel finish ties into polished nickel decorative hardware and fixtures, which supports consistent finish selection across cabinet hardware runs. The zinc material provides a metal body appropriate for decorative hardware, which keeps the pull aligned with typical cabinet and appliance handle materials. The Westerly collection styling with soft modern lines suits transitional installations, which helps the same pull sit comfortably in remodels that bridge older cabinetry and newer appliances. The 13-13/16 inch (351 mm) overall length makes this pull visible on tall fronts, which aids users in locating the handle quickly on paneled appliances.
The specified 12 inch (305 mm) center-to-center measurement gives a fixed drilling pattern, which supports repeatable mounting across multiple appliance or cabinet fronts in a project. The 1-15/16 inch (49 mm) projection sets consistent stand-off from the surface, which keeps hand clearance the same from door to door when this pull is used in a series. Base dimensions of 1-3/16 inches (30 mm) by 3/4 inch (19 mm) define the contact area at each end, which helps installers align the pull parallel to door edges or rails by referencing these pads. The polished nickel finish appears across the entire pull, which creates a uniform look from different viewing angles along a run of doors. The Amerock Corporation manufacturer part number BP54023PN identifies this exact Westerly pull, which supports reordering the same size, finish, and design for future additions or replacements.
The Amerock Westerly appliance pull has a 12 inch (305 mm) center-to-center size, which sets the drilling distance between fasteners for layout on appliance or cabinet fronts.
The BP54023PN pull is 13-13/16 inches (351 mm) long overall, which gives a substantial handle length for use on larger or taller appliance-style doors.
This polished nickel appliance pull projects 1-15/16 inches (49 mm) from the surface, which creates usable finger clearance behind the handle during operation.
The Westerly appliance pull is made from zinc, which provides a metal construction suitable for decorative appliance and cabinet hardware applications.
Each mounting base on the pull measures 1-3/16 inches (30 mm) in length and 3/4 inch (19 mm) in width, which defines the footprint touching the door surface.
This Amerock Westerly appliance pull uses a polished nickel finish, which provides a bright metallic look that coordinates with other polished nickel hardware.
The Amerock Westerly appliance pull BP54023PN provides a 12 inch (305 mm) center-to-center span in polished nickel, which matches appliance-scale doors needing a longer handle. The 13-13/16 inch (351 mm) overall length and 1-15/16 inch (49 mm) projection create a substantial, usable grip area, which suits wider or taller fronts. Zinc construction with defined base dimensions supports consistent mounting on appliance panels and large cabinet doors. For projects calling for a polished nickel appliance pull with transitional styling from the Westerly collection, this model aligns size, finish, and drilling pattern for straightforward specification.
