Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Westerly appliance pull gives you an 18 inch (457 mm) center-to-center grip, so it spans larger appliance or cabinet fronts with a comfortable handhold that feels substantial on wider faces. The 19-15/16 inch (506 mm) overall length visually anchors tall doors, helping align sightlines across a row of panels. Its Westerly collection design uses soft modern lines, which brings a transitional look that suits both updated traditional and contemporary runs of cabinetry. The Golden Champagne finish delivers a warm metallic tone, adding subtle contrast on painted or wood doors without looking harsh under jobsite or kitchen lighting. Made from zinc, the pull provides a solid, consistent profile that supports repeatable installations on multiple doors. With a 2 inch (51 mm) projection off the surface, there is practical clearance for fingers or a towel bar feel on appliance-height doors.
The 18 inch (457 mm) center-to-center dimension is the primary drilling reference, so once that measurement is set in a template, holes line up cleanly from door to door. Using the 19-15/16 inch (506 mm) overall length, you can check visual balance on the face relative to panel edges or stiles. The 2 inch (51 mm) projection defines how far the pull stands off the surface, which matters when aligning with neighboring hardware depths or planning door swing clearances. A 7/8 inch (22 mm) width and 1-5/16 inch (33 mm) base length at each mounting point give you predictable landing areas over rails or stile centers. The 7/8 inch (22 mm) base width helps keep the foot fully on flat sections of the door, which supports a solid feel when the pull is used on heavier fronts.
This Amerock Westerly appliance pull is part of the Westerly collection, so its soft modern lines align with other Westerly pieces on surrounding doors and drawers. The Golden Champagne finish works well anywhere a warm metallic accent is needed, letting the pull stand out gently against painted or stained cabinet faces. With an 18 inch (457 mm) center-to-center length, it suits wider appliance fronts or oversized pantry doors, where shorter pulls can look underscaled. The 19-15/16 inch (506 mm) total span lets the handle visually track the scale of tall doors, supporting a proportional look on full-height panels. Because the pull is 7/8 inch (22 mm) wide, it can sit comfortably on narrower rails without overpowering the stile, while still reading as an appliance-class handle.
The specified 18 inch (457 mm) center-to-center distance is a standard measurement that allows drilling jigs or CNC patterns to be set once and reused across multiple fronts, reducing layout time. Knowing the projection is 2 inches (51 mm) helps coordinate pull depth with neighboring hardware, so doors and drawers line up cleanly in profile across a run. The 1-5/16 inch (33 mm) base length gives each mounting point a predictable footprint for locating over structural rails or reinforcement, which helps the pull feel stable when used on heavier doors. A 7/8 inch (22 mm) base width keeps that footprint compact enough for narrow stile applications while still covering the bore area. The zinc construction provides a consistent body for all these dimensions, so each installed pull matches the next, supporting clean lines and dependable hand feel across the project.
The Amerock Westerly BP54024BBZ pull has an 18 inch center-to-center, 19-15/16 inch overall length, 2 inch projection, 7/8 inch width, and 1-5/16 inch base length for layout and drilling.
The 18 inch center-to-center provides a clear drilling reference, so installers can set jigs or templates once and repeat the hole pattern accurately on multiple doors or appliance panels.
The Amerock Westerly appliance pull is made from zinc with a Golden Champagne finish, giving a solid body and a warm metallic appearance on cabinet or appliance fronts.
The Westerly appliance pull projects 2 inches from the mounting surface, which creates useful hand clearance and a substantial feel on taller or wider doors.
This pull is classified as an appliance pull and uses an 18 inch center-to-center length, making it well suited to wider appliance doors and large cabinet or pantry fronts.
The Amerock BP54024BBZ appliance pull specifies 8-32 x 1-1/4 inch screws, giving a common machine thread size for securing the pull through standard cabinet or appliance door thicknesses.
The Amerock Westerly Series Golden Champagne 18 inch (457 mm) center-to-center appliance pull pairs a warm metallic finish with a long 19-15/16 inch (506 mm) body that suits larger fronts. Its zinc construction, 2 inch (51 mm) projection, and 7/8 inch (22 mm) width create a solid, comfortable grip point along tall or wide doors. With defined dimensions for base size and drilling centers, this BP54024BBZ pull helps installers and serious DIY users plan consistent layouts across appliance doors and oversized cabinets.
