Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Westerly appliance pull gives you an 18 inch (457 mm) center-to-center span, which spreads load across wide door or panel fronts so appliance panels and tall cabinet doors can be operated with a solid, two-hand grip. The overall length of 19-15/16 inches (506 mm) provides extra bar beyond the screw centers, giving more usable hand space along the pull for different users. A 2 inch (51 mm) projection keeps fingers clear of the front surface, which helps avoid knuckle scraping when opening heavier panels. The 7/8 inch (22 mm) width offers a substantial bar to grab without feeling bulky at the edge of a panel. The Westerly collection design uses soft modern lines with a transitional twist, which allows this appliance pull to coordinate with both traditional and contemporary cabinet styles on the same run.
The 18 inch (457 mm) center-to-center dimension defines the drilling pattern, which allows accurate hole layout along appliance panels or tall doors using standard metric or imperial scales. The overall 19-15/16 inch (506 mm) length means the bar extends past the mounting points, which affects where the ends land relative to stile edges or appliance trim. A 2 inch (51 mm) projection sets the standoff from the surface, which influences how the pull clears door edge details or raised profiles. The 7/8 inch (22 mm) width and the 1-5/16 inch (33 mm) by 7/8 inch (22 mm) base dimensions define the bearing area against the front, which helps when planning reveal lines around the pull. The specified 8-32 x 1-1/4 inch screw size ties directly to the pull threads, which supports predictable fastening into typical cabinet or panel substrates.
This Amerock Westerly appliance pull sits in the Decorative Hardware & Moldings, Handles and Pulls category, so it is oriented to visible cabinet and appliance panel locations where appearance and hand feel both matter. As an appliance pull class part, it is sized for larger fronts, so the 18 inch center-to-center span suits refrigerator panels, freezer panels, or oversized pantry doors that benefit from a long gripping surface. The Westerly collection styling with soft modern lines provides a transitional profile, so the pull can run across face-frame or frameless cabinet layouts without clashing with common door styles. The oil-rubbed bronze finish adds a dark accent, so it stands out against light finishes and integrates into darker schemes where a warm metal tone is preferred for visible hardware runs.
The 18 inch (457 mm) center-to-center drilling dimension allows repeatable hole placement across multiple panels, which supports consistent vertical alignment when several appliance pulls or tall door pulls are installed in a row. The long 19-15/16 inch (506 mm) overall length gives extra bar past the mounting points, which helps installers align end clearances to nearby cabinet edges or adjacent doors for a balanced look. A 2 inch (51 mm) projection defines how far the grip stands off, which keeps fingers clear of raised door profiles and allows comfortable grasping along the full span. The 7/8 inch (22 mm) width and defined base sizes create a stable contact area against the surface, which helps the pull sit flush along its length. The zinc material provides a consistent substrate under the oil-rubbed bronze finish, which supports uniform appearance when multiple pulls from the same Westerly series are used on one project.
The Amerock Westerly appliance pull has an 18 inch (457 mm) center-to-center measurement, which defines the exact hole spacing required when drilling doors or appliance panels.
The BP54024ORB Westerly pull is 19-15/16 inches (506 mm) long, so the bar extends beyond the mounting points for a visually substantial handle on wide fronts.
The Westerly oil-rubbed bronze appliance pull has a 2 inch (51 mm) projection, providing finger clearance between the grip and door or panel face.
The Amerock Westerly series appliance pull is made from zinc, which provides a consistent base material for the detailed profile and finish.
Each base on the Westerly appliance pull is 1-5/16 inches (33 mm) long and 7/8 inch (22 mm) wide, defining the footprint where it contacts the mounting surface.
The Amerock BP54024ORB Westerly appliance pull uses 8-32 x 1-1/4 inch screws, matching the threaded holes in the pull for secure fastening.
The Amerock Westerly series oil-rubbed bronze 18 inch center-to-center appliance pull BP54024ORB combines an 18 inch drilling span with a 19-15/16 inch overall length, which suits wide doors and appliance panels needing a substantial handle. Its 2 inch projection, 7/8 inch width, and defined base sizes support predictable layout, while the zinc construction and Westerly collection styling with soft modern lines align hardware appearance across a full cabinet and appliance run. Use its specified 8-32 x 1-1/4 inch screw size and documented dimensions to plan consistent installations on your next cabinetry or appliance panel project.
