Amerock Grace Revitalize Knob For Cabinets

Amerock Grace Revitalize knob in black bronze gives cabinets a defined 1-3/8 inch long by 1-3/8 inch wide pull point, so doors and drawers have a consistent hand feel across a project. The zinc material creates a solid knob body, which supports dependable grip during everyday use in kitchen, bath, or shop cabinetry. The 1-3/16 inch projection sets the knob out from the door face, providing finger clearance without pushing hardware too far into walk paths. An 11/16 inch base diameter keeps the knob footprint compact, which helps when laying out hardware on narrow rails and stiles. The Black Bronze finish establishes a dark, uniform appearance, allowing this knob to coordinate with other black bronze pieces on the same job for a unified decorative hardware run.

Key Grace Revitalize Knob Details That Matter

• The 1-3/8 inch length and 1-3/8 inch width define a balanced square pull area, helping installers align the knob visually on doors and drawers without complicated layout.
• The 1-3/16 inch projection positions the grip out from the cabinet face, which aids clearance for fingers while keeping the hardware close enough for tight galley or utility spaces.
• The 11/16 inch base diameter limits the footprint on the door surface, supporting use on narrow frame members and reducing interference with panel detailing or edge profiles.
• The Black Bronze finish delivers a dark, consistent surface tone, which supports coordinated layouts where matching black bronze decorative hardware is specified throughout a room.
• The zinc construction gives the knob a single, solid material body, which supports a stable feel when pulling heavier drawers or frequently used cabinet doors.
• The 8-32 x 1 inch screw size specification identifies the thread and length interface, which lets installers match the knob to standard cabinet drilling and thickness setups.

Amerock Knob Fit, Layout, And Mounting Notes

The Amerock Grace Revitalize knob uses an 8-32 x 1 inch screw size, giving a standard threaded connection that lines up with common cabinet knob drilling practices. The 1-3/8 inch by 1-3/8 inch face dimension helps when marking centerlines on doors and drawer fronts, because the knob presents a clear square reference at each pull point. A 1-3/16 inch projection defines how far the knob extends into the room, which matters when positioning hardware near adjacent walls or appliances. The 11/16 inch base diameter keeps the contact point small, which is useful where door frames have narrow rails or detailed profiles around the mounting location.

Using The Black Bronze Grace Revitalize Knob On Projects

Where The Grace Revitalize Knob Works Best

The Amerock Grace Revitalize Series Black Bronze 1-3/8 inch knob suits cabinet doors and drawers that need a compact, square pull point with a dark finish. The 1-3/8 inch length and width give enough surface to grab without overwhelming smaller fronts, which helps on tighter bathroom vanities or utility cabinets. The 1-3/16 inch projection provides stand-off from the face, helping hands clear door edges on thicker fronts or recessed panel designs. With an 11/16 inch base diameter, the knob sits comfortably on face frames and narrow rails, supporting layouts on traditional face-frame cabinetry as well as more modern frameless fronts. The Black Bronze finish coordinates with other black bronze hardware, allowing installers to carry a single finish across doors, drawers, and other touchpoints on the same run.

Why These Amerock Details Support Consistent Results

The BP36628BBR manufacturer part number identifies this exact Grace Revitalize knob configuration, which helps maintain part consistency across large jobs or repeat orders. The zinc construction provides a unified knob body, supporting a solid feel when opening loaded drawers or frequently accessed cabinet doors. The defined 1-3/8 inch by 1-3/8 inch size simplifies layout, because each knob uses the same visual footprint, reducing variation across a kitchen or shop installation. A 1-3/16 inch projection gives a known extension into the room, which assists in planning clearances where knobs are near corners, returns, or appliance panels. The 11/16 inch base diameter focuses the load on a compact area, which is practical on detailed doors where the mounting point sits close to edges or profiles. The Black Bronze finish delivers a unified dark color on the knob, supporting design schemes that call for black-toned decorative hardware on cabinets and casework.

Common Questions About The Grace Revitalize Knob

Choose This Amerock Knob For Coordinated Cabinets

The Amerock Grace Revitalize Series Black Bronze 1-3/8 inch knob combines a zinc construction, a defined 1-3/8 inch square face, and a 1-3/16 inch projection to support consistent cabinet layouts. The 11/16 inch base diameter and Black Bronze finish give a compact, dark touchpoint that fits face-frame or frameless fronts. With its 8-32 x 1 inch screw size specification and BP36628BBR part identification, this knob aligns well with projects that call for matching black bronze Amerock decorative hardware across multiple cabinet runs.