Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
US Futaba 14 inch soft close drawer slides use a full extension design that lets the drawer travel the complete slide length, so the entire drawer box is accessible during installation and daily use. The soft-close ball bearing mechanism controls closing speed, which protects drawer fronts and reduces impact on cabinetry over repeated use. These unhanded side mount slides allow the same part to be used on either side of the drawer, simplifying layout and reducing inventory variation in the shop. A 14 inch nominal length targets common cabinet drawer depths, which fits many kitchen, bath, and shop cabinet applications where this length is specified. The slides belong to the side mount drawer slides class, so they position on the drawer sides and cabinet sides rather than underneath, keeping the runner path visible for fitting and adjustment. The electro zinc finish coats the steel slides, which supports a uniform appearance that coordinates with other zinc finished cabinet hardware.
The side spacing of 1/2 inch plus 1/32 inch minus 0 inch per side sets a clear drawer box width relative to the cabinet opening, which supports predictable side clearance when building or adjusting drawers. A height of 1-13/16 inch, or 45.7 mm, defines the slide profile against the drawer side, which helps when planning vertical stacking of drawers in a cabinet and checking clearance to horizontal dividers. The specified pull force of 5.5 to 6.5 lb, or 2.5 to 3 kg, per drawer describes the effort needed to start movement, which affects user feel and can be considered when deciding where to place heavier-load drawers in a layout. Using only flat head screws to mount the slides keeps the screw heads flush in the slide holes, which preserves smooth travel of the ball bearing members along the runner path.
These US Futaba side mount drawer slides are described as 14 inch full extension soft-close ball bearing drawer slides, which positions them for drawer applications calling for full travel and controlled closing motion. The slides are in the side mount, ball bearing slides category, which aligns them with cabinet, furniture, and shop storage projects where the runner is mounted along both drawer sides. A length range of 12 inch to 28 inch is specified for this slide family, which indicates that the 14 inch size sits near the shorter end and suits shallower cabinets, vanities, or upper cabinet drawers where deeper slides are not required. The 100 lb load rating at 22 inch length flags the slide class as suitable for substantial loads at that tested length, which gives a performance indication for weight-bearing expectations within this product series.
The stated side spacing of 1/2 inch plus 1/32 inch minus 0 inch per side provides a precise range for drawer-to-cabinet side clearance, which helps builders size drawer boxes so the slides run smoothly without side binding. The 1-13/16 inch, or 45.7 mm, slide height defines the vertical footprint on the drawer side, which allows accurate positioning relative to drawer bottom thickness and helps maintain consistent reveal lines between stacked drawers. The 5.5 to 6.5 lb, or 2.5 to 3 kg, pull force per drawer describes the effort to open, which affects user perception of smoothness and can be used to anticipate how drawers will feel once filled with contents. The manufacturer part number 12415 04 117 and SAP description 14' REPON SOFT-CLOSE SLIDE give an exact identifier, which supports accurate reordering when matching slides across multiple cabinets or future expansion projects.
The 12415 04 117 are US Futaba full extension soft-close ball bearing side mount drawer slides, which provide complete drawer travel with controlled closing for cabinet and furniture drawers.
The 14 inch full extension length suits drawer and cabinet designs built around a 14 inch slide, which is common for shallower base cabinets, vanities, and upper cabinet drawers.
These US Futaba side mount drawer slides specify 1/2 inch plus 1/32 inch minus 0 inch side spacing, which defines the drawer box width relative to the cabinet opening for smooth movement.
The slides have a height of 1-13/16 inch, or 45.7 mm, which sets the vertical space they occupy on the drawer side when planning stacked drawer layouts.
The load rating is 100 lb at the 22 inch length, which indicates the performance level of this soft-close ball bearing slide series under test conditions at that size.
These drawer slides are specified to use only flat head screws for mounting, which keeps screw heads flush in the slide and supports smooth ball bearing travel.
Choosing US Futaba 14 inch soft close drawer slides with side mount construction and full extension performance ties your project to a clearly defined set of dimensions and operating characteristics. The specified side spacing of 1/2 inch plus 1/32 inch minus 0 inch per side, the 1-13/16 inch slide height, and the recommended use of flat head screws all work together to support predictable installation results. The soft-close ball bearing action and electro zinc finish align with cabinet and furniture jobs where controlled motion and a consistent zinc-toned appearance matter. For projects matching a 14 inch slide length and this mounting style, these slides offer a defined, repeatable standard to build around.
Sold In: 10 Set