Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The US Futaba NJ-35D65 is an 18 inch, full-extension, soft-close ball-bearing drawer slide in a zinc finish, designed for side-mount installation in residential and light-commercial cabinetry. It carries 100 lb per pair and brings the entire drawer out to the cabinet face on a damped, quiet close.
An 18 inch slide length suits medium-depth cabinets common in kitchens, bath vanities, and bedroom furniture — anywhere the cabinet interior runs roughly 18 inches front to back. Full extension is the right choice when you need access to the full depth of the drawer: pots and pans, pantry staples organized in bins, deep bathroom storage, or file drawers in a home office. The 100 lb per pair rating gives comfortable headroom for everyday loaded drawers without stepping up to a heavy-duty class slide. Soft-close matters most in high-use kitchens and shared spaces where constant door and drawer noise adds up fast; it also protects cabinet joints and drawer box hardware from the repetitive impact of an undamped close.
Steel members in a zinc finish give these slides the corrosion resistance needed for indoor cabinet environments without the cost of stainless. The zinc coating keeps the hardware looking clean and running smoothly inside a painted or finished cabinet interior. Ball bearings run in formed steel raceways the full length of the slide, distributing load evenly and keeping the action precise over thousands of open-close cycles. The integrated soft-close mechanism is built into the slide body — no separate add-on damper to install or calibrate.
Cabinet shops fitting out medium-depth drawer banks will find the non-handed format cuts layout time: pull from one bin, install left and right without sorting. Contractors refreshing kitchen or bath drawers on a renovation get a slide that pairs directly with standard face-frame or frameless cabinet openings at this depth. Homeowners upgrading a furniture piece or replacing a worn slide set get a damped, full-access result that performs well above what the price suggests. One pair per drawer is all that is needed — order the quantity that matches your drawer count.
Full extension means the drawer member travels its full length, bringing the back of the drawer out to the cabinet face. Nothing is left hidden inside at full open.
No. The damper is integrated into the slide. There is nothing to add or adjust after installation beyond the standard slide mounting.
Standard side-mount ball-bearing slides require 1/2 inch of clearance per side, so build the drawer box 1 inch narrower than the cabinet opening. Confirm the exact clearance requirement for the NJ-35D65 series in the installation guide before cutting.
Yes, but face-frame installations typically require rear mounting brackets to support the back of the slide, since the cabinet side is recessed behind the face frame. Those brackets are sold separately and must be compatible with this slide series.
This listing is for one pair of slides — one slide for each side of the drawer — which is everything needed to complete one drawer installation.
An 18 inch soft-close full-extension slide covers the most common medium-depth drawer in residential and light-commercial cabinetry — pair it with a well-built drawer box and the result is a quiet, fully accessible drawer that earns no complaints from anyone who uses it.
Sold In: 10 Set