Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Edgebanding 30756EFM First Dance .020 Thick x 15/16 Width is a PVC edge banding that finishes exposed panel edges in the First Dance design. The .020 inch thickness creates a low-profile edge that blends with standard melamine and laminate panels. The 15/16 inch width covers common 3/4 inch board edges while giving a bit of overhang for trimming, so the finished line tracks clean along the face. The color match to Tafisa M2051 First Dance keeps the edge visually tied to the panel surface, which helps runs of cabinets, casework, or shelving look uniform. PVC construction supports consistent machining with standard edgebanders, so feed, trim, and buff settings can stay predictable from job to job. The manufacturer part 30756EFM-1520-1 identifies this exact color and size for repeat ordering on follow-up projects.
The 15/16 inch width on this edge banding gives a bit of play over a 3/4 inch substrate, so minor panel size variation still trims out clean. That extra margin lets trimmers take both faces down to the board without exposing the core. The .020 inch thickness runs light, which helps when working tight reveals, such as on slab doors or drawer fronts where a heavy edge could show. PVC material responds predictably to trimming blades and buffing wheels, so set-ups can be tuned once for this thickness and then held across a production run. The First Dance color match keeps the narrow edge visually tied to Tafisa M2051 panels, reducing contrast where panels meet at corners or on long cabinet banks.
This Doellken Woodtape edge banding is matched to Tafisa M2051 First Dance, so it fits projects built around that specific decorative surface. When a shop runs cabinets, closets, or case goods in the First Dance design, using this banding on exposed edges keeps color and pattern aligned from face to edge. The 15/16 inch width is suited to covering standard 3/4 inch panels used in carcasses, partitions, and finished ends, giving enough overhang for trimming even when panels vary slightly. Because it is PVC, it suits applications where panels are processed on edgebanders set up for synthetic tape, from small runs to production batches, without changing to different tooling styles.
The .020 inch thickness of this First Dance edge banding means the transition from the Tafisa M2051 face to the edge is subtle, helping doors and drawer fronts keep a slab-like appearance after trimming and buffing. The color match to First Dance keeps lines between vertical and horizontal parts visually quiet, which matters when cabinets or shelving units run wall to wall and any mismatch would stand out. The 15/16 inch width allows trimming on both sides of a 3/4 inch board, supporting clean shoulders along cabinet fronts and gables even if the banding is applied slightly off-center. The PVC composition supports consistent cutting and scraping, helping shops hold the same settings for 30756EFM-1520-1 every time that finish returns to the schedule.
This edge banding is .020 inch thick and 15/16 inch wide, so it covers typical 3/4 inch panels with enough margin for trimming both faces clean.
This product matches Tafisa M2051 First Dance, so cabinet and furniture edges can carry the same design as the corresponding panel surfaces.
The 30756EFM First Dance banding is PVC, which supports straightforward processing on edgebanders designed for synthetic tapes.
The .020 inch thickness creates a slim edge, helping the band sit close to the panel face so trimmed doors and panels keep a clean, flat look.
Part number 30756EFM-1520-1 specifies this exact Doellken Woodtape First Dance color and the .020 inch by 15/16 inch size for ordering.
The 15/16 inch width provides overhang on a 3/4 inch board, giving room to trim both sides flush without exposing the panel core.
This Doellken Woodtape .020 inch x 15/16 inch PVC edge banding in the First Dance design ties exposed edges to Tafisa M2051 panel faces. For projects built around that finish, use 30756EFM-1520-1 wherever visible 3/4 inch panel edges need a consistent, color-matched line.
Sold In: 600 Lineal Ft