Edgebanding 30757EFM, Golden Light 1mm Thick x 15/16" Width

Edgebanding 30757EFM Golden Light For Clean Edges

Edgebanding 30757EFM Golden Light is a PVC edge banding from Doellken Woodtape that finishes raw panel edges so cabinet and furniture parts present a uniform, workable edge. The 1mm thick construction produces a more substantial edge profile that helps panels handle everyday handling at the shop or on the job site. The 15/16 inch width is sized to cover standard board thickness with a small amount of overhang to trim back to a flush, straight edge. The Golden Light color is designed to visually match Tafisa M2052 Golden Light Feria so edging and panel faces read as a single surface in finished work. The color match is rated as good, giving installers and fabricators a dependable option when building or refacing projects in this Tafisa design.

Key Golden Light Edgeband Details For Projects

• The 1mm thickness builds a solid edge that sands and trims cleanly, which supports neat joints and consistent lines along cabinet and furniture parts.
• The 15/16 inch width gives coverage beyond the panel face, so trimming back creates a crisp, flush edge along both sides of the workpiece.
• The Golden Light tone is matched to Tafisa M2052 Golden Light Feria, helping face panels and edges blend visually across doors, drawer fronts, and casework.
• The Doellken Woodtape brand identifies a dedicated edgebanding product line, which helps shops align this edge material with existing PVC surfacing choices.
• The manufacturer part number 30757EFM-1540-30 ties this roll directly to the Golden Light match, simplifying reorders for repeat projects or ongoing production runs.

Edgebanding Installation Fit And Color Match Use

The 1mm thick PVC build of this edge banding gives installers a edge that responds well to trimming and scraping along panel sides, helping maintain straight, chip-free edges. With a 15/16 inch width, the strip extends past both faces of typical panel stock, so fabricators can route or scrape back to a true, flush finish on each side. The Golden Light color match to Tafisa M2052 Golden Light Feria allows this material to be used wherever that specific Tafisa design appears, supporting consistent appearance around cabinet fronts, shelves, and exposed case edges.

Using Golden Light PVC Edging In Cabinet Work

Where This Doellken Woodtape Edge Banding Fits

This Doellken Woodtape edge banding is a PVC product in a Golden Light color, so it aligns with projects built around Tafisa M2052 Golden Light Feria panels. The 1mm thickness supports use on cabinet doors, drawer fronts, or carcass edges that benefit from a more pronounced edge detail. At 15/16 inch wide, the banding suits common panel thicknesses used in casework, providing enough coverage to trim back flush without exposing the core. Shops fabricating parts from Tafisa M2052 Golden Light Feria can run this edge banding on matching components so every exposed edge carries the same Golden Light tone as the panel surface. That consistency helps finished installations look planned and coordinated from face to edge.

Why Dimensions And Match Matter For Repeatable Results

The specified 1mm thickness gives a predictable amount of edge material, which helps trimming tools and scrapers cut a consistent line across multiple parts in a run. Because the width is defined at 15/16 inch, programmers and operators can set up trimming stations around that dimension and expect the same overhang on each panel. The documented color match to Tafisa M2052 Golden Light Feria means designers and production staff can standardize on this edge banding when that Tafisa design is selected, reducing variation between batches. Using the same manufacturer part number, 30757EFM-1540-30, for ordering ties future rolls back to this exact Golden Light match so replacement parts or added cabinets carry the same edge appearance as original pieces.

Common Questions About Golden Light Edgebanding 30757EFM

Select Edgebanding 30757EFM Golden Light For Tafisa Work

Edgebanding 30757EFM Golden Light ties directly to Tafisa M2052 Golden Light Feria, so shops working in that design can standardize on this 1mm thick, 15/16 inch wide PVC edge banding. Using the defined manufacturer part number 30757EFM-1540-30 keeps future orders aligned to the same Golden Light color and dimensions, supporting consistent, repeatable edges across initial installations and follow-up projects.