CompX National Electronic Push Button Cabinet Lock,1-3/4" Cylinder Length with Satin Nickel Finish - REG-M-R-5
Description
CompX RegulatoR Electronic Lock For Cabinets
CompX RegulatoR electronic push button cabinet lock is a keyless lock for cabinet doors, drawers, lockers, and similar enclosures, giving controlled access where keyed cylinders are not desired. This CompX National electronic push button cabinet lock uses a 1-3/4 inch cylinder length, so it reaches through thicker cabinet doors and drawer fronts where shorter cylinders would not reach the mounting surface. The horizontal right hand mount layout is designed for doors where hinges are on the right when facing the door, aligning the lock body and cam movement with that door swing. Manual locking operation requires the knob to be rotated to open and locked positions after a valid code is entered, so the user has positive control over when the cabinet is actually locked or unlocked. The satin nickel finish provides a neutral, professional appearance that coordinates with many common cabinet hardware finishes in shop, office, or locker installations.
Keyless Cabinet Lock Details That Matter On Site
- The electronic push button keypad replaces traditional keys, which reduces dependence on physical key management in cabinets, drawers, and lockers.
- Support for 20 codes per lock allows multiple users or access levels to be set up on a single enclosure, which helps organize shared storage areas.
- Battery life rated at 75,000 cycles extends time between battery changes, which reduces service disruptions in busy environments.
- The AAA battery compartment is accessible from the outside of the cabinet, so batteries can be changed without disassembling the lock or opening up the cabinet structure.
- A low battery indicator alerts users before power is lost, which helps maintain access without unexpected lockouts in daily use.
- The 3/4 inch diameter mounting hole layout lets the lock fit standard bored holes for this size, which simplifies cabinet preparation and layout.
Right Hand Mount And Cylinder Fit Details
The horizontal right hand mount on this CompX RegulatoR electronic push button cabinet lock aligns its operation with doors hinged on the right when facing the door, so the cam rotation follows the door swing for consistent latching. The 1-3/4 inch cylinder length is suited to applications where the door or drawer front thickness requires a longer body, allowing the threaded portion to extend through and properly position the cam. The 3/4 inch diameter mounting hole requirement sets the bore size needed in the panel, guiding drilling operations for clean installations. Manual locking operation, where the knob is rotated to open and locked positions after a valid code, provides a clear tactile step that helps users confirm when the cabinet is secured.
Using This REG-M-R-5 Lock In Real Projects
Where This Manual Right Hand Lock Fits Best
This CompX RegulatoR electronic push button cabinet lock, in its horizontal right hand mount version, is intended for cabinet doors with hinges on the right, drawers, lockers, and similar enclosures where that handing and layout match the hardware plan. Its 1-3/4 inch cylinder length suits thicker door and drawer fronts, so the installer can use it on sturdier cabinet constructions without sacrificing proper cam engagement behind the panel. The satin nickel finish lets this lock sit visibly on office cabinetry, storage lockers, or shop cabinets while matching other satin nickel components in the same installation. As a keyless, electronic push button lock, it serves locations that need code-based access control instead of keys, such as shared storage in workrooms or staff lockers.
How Manual Operation And Codes Support Workflow
The manual locking version of this CompX National electronic push button cabinet lock requires the knob to be rotated to open and locked positions after a valid code entry, so users perform a deliberate action that confirms the cabinet has been secured at the end of use. With 20 codes per lock available, different users or departments can be assigned their own codes, which can simplify organizing access across multiple people using the same cabinet or locker. The 75,000 cycle battery life rating means the lock is designed to operate through many open-and-close cycles before batteries need replacement, supporting frequent daily access in busy areas. Because the AAA battery compartment is accessible from the outside of the cabinet, battery changes can be handled from the front side, keeping the cabinet structure intact during service. The low battery indicator provides notice before power loss, letting users schedule a battery change at a convenient time and maintain consistent access. The 3/4 inch diameter mounting hole spec gives a clear drilling target that helps align the cylinder and cam, which supports smooth latch engagement in repetitive use.
Common Questions About This CompX RegulatoR Lock
What type of lock is the REG-M-R-5 model?
The REG-M-R-5 is a CompX RegulatoR electronic push button cabinet lock, so it provides keyless, code-based access for cabinet doors, drawers, lockers, and similar enclosures.
How is the CompX RegulatoR REG-M-R-5 mounted?
The CompX RegulatoR REG-M-R-5 uses a horizontal right hand mount, which aligns its operation for doors where the hinges are on the right when facing the door.
What cylinder length does this cabinet lock use?
This cabinet lock uses a 1-3/4 inch cylinder length, allowing it to pass through thicker cabinet doors or drawer fronts while correctly positioning the cam hardware behind the panel.
How does the manual locking version operate in use?
The manual locking version requires the knob to be rotated to open and locked positions after a valid code entry, giving users a clear step that confirms locking or unlocking.
How many user codes can this electronic cabinet lock support?
This electronic cabinet lock supports 20 codes per lock, so multiple users or access groups can each have their own code on the same cabinet or locker.
What power and battery features does the REG-M-R-5 have?
The REG-M-R-5 uses AAA batteries with a battery life rated at 75,000 cycles, an externally accessible battery compartment, and a low battery indicator for timely battery replacement.
Selecting This Satin Nickel Electronic Cabinet Lock
This CompX RegulatoR electronic push button cabinet lock with 1-3/4 inch cylinder length pairs a horizontal right hand mount with manual knob operation, giving both code control and tactile locking for cabinet doors, drawers, lockers, and similar enclosures. The satin nickel finish and 3/4 inch diameter mounting hole spec tie appearance and drilling layout to common cabinet hardware practices. When a project calls for keyless entry with 20 codes per lock, extended 75,000 cycle battery life, and outside-accessible AAA battery replacement with low battery indication, this REG-M-R-5 configuration delivers those requirements in one lock body.