3-3/4 inch flush hood pull from Hardware Concepts, Inc. is a zinc pull in a matte chrome finish that provides a low-profile grip for doors or drawers where a recessed look is preferred. The pull is identified by manufacturer part number 4121-073, which ties directly to the Flush Hood Pull collection for consistent selection across projects. Its zinc construction creates a solid metal feel while keeping the pull suitable for decorative hardware applications. The matte chrome finish offers a muted metallic look that helps the pull sit visually quiet on modern or transitional fronts. With a 3-3/4 inch center-to-center dimension, it aligns with common drilling jigs, simplifying layout when matching existing hole patterns or planning new runs.
This 96mm c c zinc flush pull uses a 3-3/4 inch center-to-center mounting dimension, which ties directly into many cabinet drilling templates and simplifies repeating the same spacing across multiple fronts. The 4-5/16 inch length and 2 inch width define the footprint on the door or drawer, which helps with laying out clearances between neighboring pulls or adjacent edges. A 13/16 inch projection determines how far the grip stands off the face, affecting finger access and how far the pull sits relative to surrounding components. The pull uses 8-32 x 1 inch screws as the fastening size, so the mounting interface is based on a standard machine screw thread commonly used in cabinet hardware work.
This matte chrome flush hood pull sits in the Decorative Hardware & Moldings category under Handles and Pulls, placing it in the range typically used on cabinet doors, drawers, or similar fronts in woodworking projects. The 3-3/4 inch center-to-center dimension supports use in runs of cabinetry where consistent spacing between pulls is important to the finished look. Its 4-5/16 inch length and 2 inch width define a modest footprint that works on medium-scale doors or drawers without crowding the face. With a 13/16 inch projection, the pull offers enough stand-off for fingers to hook behind the grip while still aligning with designs that favor a recessed or streamlined appearance. The zinc material and matte chrome finish keep the pull visually aligned with other metal decorative hardware commonly specified in the same job.
The 3-3/4 inch center-to-center spacing on this Hardware Concepts flush pull ties to a widely used 96mm drilling pattern, which benefits installers who want predictable hole locations and fast repeatable layout. Its placement in the Flush Hood Pull collection helps projects that require matching pulls across multiple rooms or banks of fronts, because the collection name provides a clear reference when reordering. The 4-5/16 inch total length gives a small margin beyond the drilled holes, so minor layout variations still appear visually centered once installed. A 2 inch width offers a stable gripping area that users can find easily by feel, which is useful on frequently used doors and drawers. The 13/16 inch projection defines how far the hardware stands proud of the surface, influencing not only hand clearance but also how the pull aligns with neighboring hardware elements along a run of cabinetry.
The 3-3/4 inch flush hood pull has a 3-3/4 inch center-to-center dimension, which matches a common drilling pattern and helps align installations with standard cabinet hardware layouts.
The pull measures 4-5/16 inches in overall length and 2 inches in width, giving a defined footprint that suits medium-size doors or drawers without overwhelming the front.
The flush pull has a 13/16 inch projection, setting the grip off the surface enough for finger access while keeping a relatively low-profile appearance on the face.
The Hardware Concepts, Inc. flush hood pull is made from zinc, providing a metal body suited for decorative cabinet hardware applications in woodworking projects.
The 4121-073 pull uses a matte chrome finish, giving a soft metallic look that coordinates with other chrome-toned decorative hardware components on a project.
This zinc flush pull uses 8-32 x 1 inch screws, so fastening ties into a standard machine screw size commonly specified for cabinet pulls and handles.
The 3-3/4 inch flush hood pull in matte chrome from Hardware Concepts, Inc. combines a 96mm center-to-center mounting, zinc construction, and a 13/16 inch projection to support clean, repeatable cabinet hardware layouts. Its 4-5/16 inch by 2 inch footprint and placement in the Flush Hood Pull collection align it with decorative hardware and molding projects handled through Wurth Baer Supply. When a job calls for a low-profile metal pull with a muted chrome finish and a standard 3-3/4 inch drilling dimension, this 4121-073 flush hood pull offers the documented sizes and finish needed to match layout plans.
Sold In: 1 Each