Panolam WM3450 Maple Cream laminate gives you a high-pressure laminate surface built from melamine resin impregnated decorative paper thermally fused to an industrial grade of particleboard or medium density fiberboard, so you get a stable, work-ready panel. The 49x97 inch vertical grade size fits typical cabinet and fixture runs, which helps lay out doors, drawer fronts, and vertical partitions with less cutting and waste. The Maple Cream design provides a consistent decorative look across the sheet, so finished casework, wall panels, or fixtures keep the same appearance from piece to piece. This panel uses decorative faces on both sides, which keeps both the front and back of partitions, doors, or exposed ends visually finished. The suede finish adds a subtle texture on the decorative surface, so projects have a softer, less reflective look in installed spaces.
The vertical grade construction in this Panolam WM3450 Maple Cream laminate is designed for upright cabinet and fixture surfaces, so it suits doors, drawer fronts, and wall panels that do not carry heavy horizontal loads. The 49 inch width and 97 inch length offer generous coverage, so a single sheet can yield multiple cabinet components in the same Maple Cream pattern. Because the decorative paper is thermally fused to particleboard or MDF, fabrication processes such as cutting or edge preparation work into a predictable core beneath the decorative surface. Decorative faces on both sides of the panel create a finished look on both interior and exterior orientations, so dividers, end panels, and similar parts can be positioned where either face may remain exposed.
This Panolam WM3450 Maple Cream high-pressure laminate panel fits projects that call for a decorative Maple Cream appearance on both faces, because the panel is supplied with decorative faces on both sides. In cabinetry and commercial fixtures, the 49x97 inch vertical grade size suits tall doors, closet components, and full-height partitions, so layouts can place several pieces on one sheet while maintaining pattern continuity. Interior woodworking that relies on a stable core benefits from the industrial grade particleboard or medium density fiberboard substrate, because that core supports attachment details into a uniform base under the decorative layer. Projects that use exposed backs or interior faces gain a consistent visual result, since both faces carry the same Maple Cream laminate surface with a suede finish.
The melamine resin impregnated decorative paper in this Panolam laminate forms the wear surface over the core, so routing or trimming operations work beneath a hard decorative layer bonded to the substrate. Thermal fusion of the laminate to industrial grade particleboard or MDF creates a single integrated panel, so machining yields clean transitions from decorative face to core without separate loose laminate layers. Decorative faces on both sides reduce orientation decisions during fabrication, because either side can function as the finished face while still matching the Maple Cream design. The suede finish across both faces establishes a uniform, low-sheen texture, so adjoining parts from the same sheet align visually under typical shop lighting and in final installations.
The Panolam WM3450 Maple Cream product is a high-pressure laminate panel made from melamine resin impregnated decorative paper thermally fused to particleboard or MDF, so it functions as a finished surfacing sheet for woodworking projects.
The decorative surfaces use melamine resin impregnated decorative paper fused to the core, so the Maple Cream design and wear surface bond directly to the particleboard or MDF for a unified panel.
Decorative faces on both sides mean each face carries the Maple Cream laminate, so either side can be used outward on partitions, doors, or panels where both faces may be visible.
This Panolam vertical grade panel measures 49 inches by 97 inches, so it supports full-height cabinet or fixture parts and efficient nesting of multiple components from a single sheet.
The suede finish provides a fine, textured surface on the Maple Cream laminate, so the finished panel presents a softer, more diffused appearance under interior lighting.
This Panolam laminate panel uses an industrial grade particleboard or medium density fiberboard core, so cutting and machining work into a consistent, engineered wood substrate beneath the laminate.
The Panolam WM3450 Maple Cream vertical grade panel combines a melamine resin decorative surface with an industrial grade particleboard or MDF core, so shop work proceeds on a stable, high-pressure laminate sheet. The 49x97 inch panel size and decorative faces on both sides support efficient layouts where both faces may remain exposed. For cabinet, fixture, or interior woodworking projects that call for a Maple Cream appearance with a suede finish, this panel provides a consistent decorative surface ready for fabrication.
Sold In: 1 Sheet