Olympus Pin Tumbler Cam Lock, DCN2 7/8" Material Thickness with 3/4" Cylinder, Satin Chrome, Keyed Alike - 103

Olympus Pin Tumbler Cam Lock For N Series Jobs

Olympus pin tumbler cam lock DCN2-26D-103 secures cabinet or casework doors using an N Series keyway, so it works alongside other N Series locks on the same project. The zinc die cast body and cylinder create a solid cam locking point for typical cabinet materials, supporting consistent key operation. The satin chrome 26D finish gives the lock face a neutral appearance that blends with common commercial hardware finishes. The 7/8 inch material thickness rating with 3/4 inch cylinder length matches many medium-thickness panels, so the cylinder projects correctly for standard cam engagement. The 1 inch face covers splintering around the bore, which reduces the need for a separate trim ring on prepared doors. Grade 1 performance per ANSI/BHMA A156.11 means the lock has been tested to a recognized standard, supporting demanding commercial and institutional uses.

Key Details Of DCN2-26D-103 For Daily Use

• The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, lets this cam lock work within existing N Series key systems, supporting unified key control across matching hardware runs.
• Stock keying options KD or KA with Stock KA# 103 allow keyed alike 103 groups, so multiple locks can use the same key code on related cabinets to simplify access control in a defined area.
• The zinc die cast lock body and zinc die cast pin tumbler cylinder provide a stable housing for the cam action, helping maintain alignment between cylinder rotation and cam throw over repeated cycles.
• The standard function with the key removable in locked or unlocked position allows operators to withdraw the key after either action, which suits applications where the cylinder doubles as a simple turn control.
• Two reversible cams that work in all positions give flexibility in how the cam engages strikes or cutouts, so one lock body can serve different door swing directions or latch-side layouts.
• The satin chrome 26D finish and 1 inch face diameter cover the bore edge and provide a finished appearance, which is useful on visible cabinet fronts where clean hardware lines matter.

Cam Lock Fit, Material Thickness, And Cylinder Layout

The DCN2-26D-103 configuration is designed for 7/8 inch material thickness with a 3/4 inch cylinder, so the threaded section and cam interface suit panels in that range. This match between material thickness rating and cylinder length helps position the cam behind the door or drawer at a practical distance for engaging strikes or keeper plates. The 1 inch face neatly covers the drilled hole, which supports clean mounting in cabinet doors without extra trim steps. With two reversible cams that operate in all positions, the installer can set up the cam orientation to match the specific cabinet geometry while using the same core lock body.

Using This Satin Chrome Cam Lock In Real Work

Where The N Series Cam Lock Fits Best

The Olympus DCN2-26D-103 cam lock uses the N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, so it fits projects already using N Series key platforms. This lets locksmiths and millwork shops extend an established key system into new cabinets or fixtures without changing keyway families. The keyed alike 103 option from the stock KA numbers 101, 103, 107, and 915 supports groups of locks set to the same KA 103 code, helpful where multiple doors within a zone share access. Its recognition as a Woodwork Institute acknowledged product aligns this cam lock with woodwork specifications that call out that acknowledgment, helping spec-driven projects match written standards. Passing ANSI/BHMA A156.11 Grade 1 performance requirements, with equivalence to E07261 / E07271, indicates this cam lock is suited to applications expecting high cycle counts under commercial conditions.

Details That Support Reliable Locking Performance

The zinc die cast body and pin tumbler cylinder form a consistent operating unit, which supports predictable rotation and cam travel after repeated locking and unlocking. The standard function where the key is removable in both locked and unlocked positions enables users to use the key as a control input rather than as a captive operator, which can streamline routines in retail cases or storage cabinets. Two reversible cams that work in all positions offer multiple engagement options from one base lock, so installers can handle different handing and strike locations without sourcing separate lock bodies. The 1 inch face is sized to cover splintering from drilling operations in wood or wood-based panels, which helps present a clean edge around the cylinder on finished faces. Easy rekeying via the cylinder retainer clip allows changes to keying without replacing the cam lock body, supporting field adjustments when access requirements change over time.

Common Questions About DCN2-26D-103 Cam Lock

Selecting This N Series Cam Lock For Your Job

The DCN2-26D-103 Olympus pin tumbler cam lock brings an N Series keyway, ANSI/BHMA A156.11 Grade 1 performance, and a satin chrome 26D finish to cabinet and casework applications. Its 7/8 inch material thickness rating with a 3/4 inch cylinder, reversible cams working in all positions, and 1 inch face diameter all support clean, functional installations in woodwork projects. With easy rekeying via the cylinder retainer clip and keyed alike 103 availability, this cam lock helps align cabinet security with existing N Series systems. Use this lock when a zinc die cast N Series cam solution with verified Grade 1 performance and Woodwork Institute acknowledgment matches your cabinet specification.