Olympus DCN4 Pin Tumbler Cam Lock, 1-1/2" Material Thickness with 3/4" Bore Diameter, Keyed Alike 915, Satin Chrome

Olympus DCN4 Pin Tumbler Cam Lock For Secure Panels

Olympus DCN4 pin tumbler cam lock is a zinc die cast cam lock with a pin tumbler cylinder designed for secure cabinet and panel locking where N Series keying is required. The lock is keyed alike 915, so multiple DCN4-26D-915 units can be operated with the same KA915 key number in keyed alike 915 installations. The 1-1/2 inch material thickness rating with a 3/4 inch bore diameter supports standard panel drilling and gives a clear target for boring operations. A 1 inch face covers splintering around the bore, which removes the need for an additional trim ring and leaves a cleaner finished opening after drilling. The satin chrome 26D finish matches other 26D hardware and keeps the lock appearance consistent across cabinet runs.

Key Olympus Cam Lock Details That Save Time

• The body and cylinder use zinc die cast construction, which provides a solid housing for the pin tumbler mechanism and supports long-term key operation in typical cabinet environments.
• The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, lets this lock work within existing N Series key systems for unified key control across multiple lock points.
• Keyed alike 915 stock keying allows multiple locks on the same project to share the KA915 key number, simplifying key management when the same user needs access to several doors or drawers.
• The cylinder is rekeyable via a cylinder retainer clip, so the lock core can be changed when keying needs to be updated without replacing the entire lock body.
• This product passed ANSI/BHMA A156.11 Grade 1 performance requirements, equivalent to E07261 and E07271, giving a tested performance level for demanding commercial woodworking applications.
• Woodwork Institute acknowledgment identifies this lock as an accepted product, helping spec-driven shops match institutional standards on millwork projects.

Cam Lock Fit, Face Coverage, And Operation

The 1-1/2 inch material thickness specification defines how deep this cam lock is intended to reach through cabinet or panel stock, which guides boring depth and hardware layout. The 3/4 inch bore diameter gives an exact drilling size, helping drill operators set up bits and jigs without guesswork. A 1 inch face is designed to cover splintering at the bore edge, so even slightly rough drill cuts are hidden once the lock is seated. The standard function allows the key to be removable in the locked or unlocked position, which lets installers and end users withdraw the key after positioning cams in either state during normal operation.

How This N Series Cam Lock Works In Practice

Where The Olympus DCN4 Cam Lock Is Applied

This Olympus Lock, Inc. DCN4-26D-915 cam lock sits in the cam locks category for cabinet and woodworking use, so it fits applications where a rotating cam secures doors, drawers, or panels. The N Series keyway ties it into systems that already rely on National D4291 4-pin or D4292 5-pin style keying, which is important on projects standardizing around that key section. Because the lock is keyed alike 915 with stock KA 915, it suits banks of cabinets or casework where one key should operate every lock. The satin chrome 26D finish coordinates with other satin chrome components, bringing visual consistency on doors, drawer fronts, and panels in commercial millwork installations.

Details That Support Consistent Locking Performance

The pin tumbler cylinder design provides a familiar key feel and supports masterkeyed 5 pin standard systems, which allows tiered access control under a master key on larger facilities. The lock is also grand masterkeyed available, so it can be integrated into broader key hierarchies when specified. Two reversible cams are designed to work in all positions, giving flexibility for mounting orientation and latch direction without changing the lock body. An anti-rotation plate helps keep the lock body from turning in the bore, which maintains cam alignment and reduces the chance of misaligned strikes after repeated use. A lost-motion cam shifter manages cam travel, supporting smoother turn action where controlled motion is needed. Finishes available on this series are 26D, 3, 10B, and 19, so the same core design can align with different hardware finish schedules while keeping the functional specification consistent.

Common Questions About Olympus DCN4 Cam Lock Use

Selecting This Olympus Cam Lock For Your Project

The Olympus DCN4-26D-915 pin tumbler cam lock combines a zinc die cast body, N Series keyway, and keyed alike 915 stock keying for streamlined cabinet and panel security. The 1-1/2 inch material thickness rating, 3/4 inch bore diameter, and 1 inch face simplify boring and finishing steps while helping achieve a clean look in satin chrome 26D. For projects calling for ANSI/BHMA A156.11 Grade 1 performance and Woodwork Institute acknowledged products, this DCN4 cam lock offers a defined specification that fits demanding commercial woodworking installations.