Olympus DCN4 Pin Tumbler Cam Lock, 1-1/2" Material Thickness with 3/4" Bore Diameter, Keyed Alike 101, Bright Brass

Olympus DCN4 Pin Tumbler Cam Lock For Cabinets

Olympus DCN4 pin tumbler cam lock is a zinc die cast cam lock that secures cabinets and similar casework using a keyed cylinder and cam action. The bright brass finish provides a 3 finish that matches other brass hardware on the job for a clean, consistent look. The body and cylinder use a zinc die cast construction, which supports precise pin tumbler operation for repeatable keying. Key removable in locked or unlocked position means the lock can function in applications where the key stays with the user or the cabinet, giving flexibility in how the opening is managed. Two reversible cams work in all positions, so the same lock body can be set up for different cam throw directions or mounting orientations on the project. The 1 inch face covers splintering around the 3/4 inch bore diameter, letting the lock seat neatly without an extra trim ring.

Keyed Alike, Rekeyable, Grade 1 Performance Details

• Keying that can be keyed together with other N Series locks lets one key operate multiple lock positions using the N Series keyway, which simplifies key control on cabinets built as a group.
• Easily rekeyable via cylinder retainer clip supports changing the keying configuration in the field by servicing the cylinder, which is useful when access needs change on an installation.
• Passed ANSI/BHMA A156.11 Grade 1 performance requirements, equivalent to E07261 / E07271, which indicates the lock has been tested for a high level of cam lock performance in demanding usage.
• Woodwork Institute acknowledged product status ties the lock to recognized woodwork standards, which can help align cabinet hardware selection with specified commercial millwork requirements.
• N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin system, allows this lock to integrate into existing N Series key systems where that keyway is already being used in a project.
• Stock keying KD/KA 4 pin standard with stock KA numbers 101, 103, 107, and 915 defines common keyed alike and keyed different options, helping match locks to a planned keying scheme.

Cam Lock Installation And Face Coverage Details

The 1-1/2 inch material thickness rating with 3/4 inch bore diameter means this cam lock is set up for panels in that thickness range drilled with a 3/4 inch hole, aligning the cylinder body to the material depth. The 1 inch face covers splintering around the bore, so the lock can seat against slightly rough drill edges without an extra trim ring, leaving a finished appearance on the front. The bright brass face ties into other 3 finish components at the door or drawer front, supporting a uniform hardware look. The zinc die cast body and cylinder support precise dimensional control, which helps the cams align with strikes or frame edges when the lock is set to its working position on the cabinet.

Where This Olympus Cam Lock Fits Best

Bright Brass N Series Cam Lock In Use

This Olympus DCN4 pin tumbler cam lock uses an N Series keyway that is equivalent to National D4291 4-pin or D4292 5-pin systems, so it fits into projects already laid out around that key platform and supports consistent keying. Key removable in locked or unlocked position lets the lock serve either as a typical cabinet cam lock or in applications where the key stays inserted during use, depending on how the shop wants to control openings. Two reversible cams that work in all positions allow the installer to select the cam orientation that best meets the door or drawer edge, helping the lock function on a range of cabinet layouts. Body and cylinder in zinc die cast pin tumbler construction support precise interaction with the N Series keys, which helps maintain smooth operation across multiple openings on the same job.

Details That Support Reliable Locking Results

Passed ANSI/BHMA A156.11 Grade 1 performance requirements, equivalent to E07261 / E07271, so the lock brings a tested cam lock performance level to cabinets expected to see frequent operation. Being a Woodwork Institute acknowledged product ties this lock to recognized millwork standards, which supports its use on projects where hardware must align with WI criteria. Rekeyable via cylinder retainer clip gives service personnel the ability to change keying without swapping the entire lock body, reducing disruption when access control changes. Masterkeyed 5 pin standard and grand masterkeyed available show that the cylinder platform supports multi-level key control, which is important when cabinets are part of a larger key hierarchy across a facility. Stock KA number 101 identifies the keyed alike 101 option referenced in the product name, helping match new locks to an existing KA 101 key set where that pattern is already in service.

Common Questions About This Olympus DCN4 Cam Lock

Select This Cam Lock For N Series Keyed Projects

The Olympus DCN4 pin tumbler cam lock in bright brass brings an N Series keyway, keyed alike 101 option, and ANSI/BHMA A156.11 Grade 1 performance to cabinet jobs. Zinc die cast body and cylinder, reversible cams, and a 1 inch face are all oriented toward practical cabinet use. For projects planned around N Series keying, KA 101 groupings, or Woodwork Institute acknowledged hardware, this Olympus cam lock aligns the cylinder platform, finish, and performance with those needs so the cabinet portion of the job follows the same keying and hardware standards.