N Series Pin Tumbler Deadbolt Door Lock, Oil Rubbed Bronze, Keyed to KA107 Key, 7/8" Cylinder Length

N Series Deadbolt Lock For KA107 Keyed Systems

N Series pin tumbler deadbolt lock gives you a keyed to KA107 solution built for installations that depend on matching an existing N Series keying system. The cylinder uses the N Series keyway, equivalent to the National D4291 4-pin or D4292 5-pin system, so it ties directly into common commercial key hierarchies. The lock body is zinc die cast, which provides a solid housing for the cylinder in door or panel applications. A solid brass pin tumbler cylinder delivers precise key operation, important when you are managing multiple openings on the same site. This deadbolt can be keyed together with other N Series locks, so you can extend one keying plan across latches and other hardware. The standard function keeps the key removable in either the locked or unlocked position, which supports straightforward lock-up routines.

Key Details That Support Locking Projects

• The deadbolt can be keyed together with other N Series locks, allowing a single key to operate multiple openings on the same job where N Series hardware is used.
• The cylinder is easily rekeyable via a set screw cylinder release mechanism, so cylinders can be changed in the field without replacing the entire lock body during rekey work.
• The lock has passed ANSI/BHMA A156.11 Grade 1 performance requirements, giving you a deadbolt that has been tested to a recognized commercial performance standard for this product class.
• The cylinder is available in 15/16 inch, 1-3/8 inch, or 1-5/8 inch lengths with a 7/8 inch barrel diameter, giving you defined sizing for matching door or panel thickness and corresponding boring dimensions.
• The standard function design allows the key to be removable in the locked or unlocked position, which simplifies operating routines where users lock or unlock multiple doors in sequence.

Deadbolt Fit, Cylinder Length, And Keying Setup

This Olympus N Series deadbolt uses a 7/8 inch barrel diameter, so boring operations can be laid out around that dimension for door or panel prep. Available cylinder lengths of 15/16 inch, 1-3/8 inch, or 1-5/8 inch give flexibility to match varying material thicknesses on different doors within the same project. The cylinder is solid brass with a pin tumbler design, supporting consistent key feel when cut to the N Series keyway. Stock keying is KD/KA in a 4-pin standard layout, so installations can use keyed different or keyed alike setups as required on a site. When masterkeying is required, the lock is 5 pin standard in masterkeyed form, which supports tiered key systems. Stock KA numbers 101, 103, 107, and 915 define common keyed alike groups, and this specific lock is keyed to KA107 for alignment with that group.

Using The Olympus 100-10B78-107 Deadbolt On Projects

Where This N Series Deadbolt Lock Is Applied

This N Series pin tumbler deadbolt door lock fits applications that call for a 7/8 inch barrel diameter cylinder with selectable lengths of 15/16 inch, 1-3/8 inch, or 1-5/8 inch, so it works across doors or panels with different thicknesses in the same facility. The oil rubbed bronze finish establishes a consistent appearance when matched with other oil rubbed bronze hardware on adjacent openings. Because the keyway is N Series, equivalent to the National D4291 4-pin or D4292 5-pin system, it integrates into projects where those key systems are already in use. The deadbolt is part of the N Series, so it can be keyed together with other N Series locks on cabinets, doors, or related hardware that share that system. Stock KA numbers, including KA107, allow sites to organize openings by keyed alike groups and tie this deadbolt into the KA107 group already established.

Why These Deadbolt Details Support Consistent Results

The Olympus N Series deadbolt has passed ANSI/BHMA A156.11 Grade 1 performance requirements, so installers can align it with specifications that call for Grade 1 deadbolt performance on a project. The zinc die cast body gives the cylinder a rigid housing, which helps maintain alignment between the cylinder and bolt over extended use. A solid brass pin tumbler cylinder provides a stable platform for cutting keys on the N Series keyway and supports both 4-pin stock keying and 5-pin masterkeyed setups. The rekeyable set screw cylinder release mechanism lets locksmiths or maintenance teams change cylinders while retaining the installed body, supporting long-term key control strategies. Standard function locks are non-handed, simplifying stocking and installation because one product serves left or right hand doors. The standard function also keeps the key removable in locked or unlocked positions, streamlining daily operation where staff secure or open multiple doors on a route.

Common Questions About This KA107 N Series Deadbolt

Selecting This Olympus Deadbolt For N Series Work

The Olympus 100-10B78-107 N Series pin tumbler deadbolt lock pairs an oil rubbed bronze finish with an N Series keyway keyed to KA107, making it suited to projects standardizing on that keyed alike group. The zinc die cast body and solid brass cylinder form a defined platform for long-term key management in doors or panels using a 7/8 inch barrel diameter. With ANSI/BHMA A156.11 Grade 1 performance and a rekeyable set screw cylinder release mechanism, this deadbolt supports ongoing rekey work and key system changes. Use this Olympus N Series deadbolt when you need to extend a KA107 keyed group across additional openings under the same N Series system.