N Series Pin Tumbler Deadbolt Drawer Lock, Satin Brass, Keyed to KA915 Key, 15/16" Cylinder Length

N Series Deadbolt Drawer Lock For Secure Drawers

N Series pin tumbler deadbolt drawer lock gives you a keyed deadbolt solution for drawer applications where a solid lock point matters. The lock uses an N Series keyway, equivalent to the National D4291 4-pin or D4292 5-pin system, so it ties into installations that already use that key system. The cylinder is solid brass with a pin tumbler design, which provides a durable keyed interface for high-use drawers. The body is zinc die cast, giving the lock housing a rigid structure for the deadbolt to work against during locking and unlocking. This model is keyed to the KA915 key number, which matches other KA915 N Series locks when a common key code is required. The standard function allows the key to be removable in either the locked or unlocked position, so the user can lock or unlock a drawer and remove the key after each operation.

Deadbolt Drawer Lock Details That Support Daily Use

• The deadbolt drawer lock is part of the Olympus N Series, which lets it be keyed together with other N Series locks so multiple points in a project can share the same key system.
• The lock is easily rekeyable via a set screw cylinder release mechanism, so the cylinder can be changed on-site when a keying change is required on an existing installation.
• The product passed ANSI/BHMA A156.11 Grade 1 performance requirements, equivalent to E07041(200DW), giving the lock a tested performance level for demanding drawer applications.
• The standard function design keeps the key removable in both locked and unlocked positions, allowing users to remove the key after locking or after momentary access without altering lock function.
• The lock cylinder is available in 15/16 inch, 1-3/8 inch, or 1-5/8 inch lengths with a 7/8 inch barrel diameter, so the installer can match cylinder length to drawer front thickness and construction.

Deadbolt Drawer Lock Fit, Cylinder Length, And Keying

The deadbolt drawer lock uses a 7/8 inch barrel diameter, which matches the hole size that needs to be prepared in the drawer front. With cylinder length options of 15/16 inch, 1-3/8 inch, or 1-5/8 inch, the installer can select a length that seats the lock body properly through varying drawer front and panel combinations. The satin brass finish on the cylinder gives the visible face a consistent appearance when used on drawer fronts where finish alignment matters. Keying is offered as stock KD/KA in a 4-pin standard configuration, which supports either individually keyed drawers or keyed-alike groups in the same project. Masterkeyed setups are available as a 5-pin standard system, and grand masterkeyed options are also available for installations that require tiered key control.

Using This Olympus Deadbolt Drawer Lock In Projects

Where This N Series Drawer Deadbolt Lock Is Applied

This Olympus deadbolt drawer lock is used on drawer applications that require a deadbolt action rather than a spring latch. The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, lets it integrate into jobs that already rely on that key family. Because the lock can be keyed together with other N Series locks, cabinets, pedestals, or storage banks can all share the same key pattern when planned around N Series hardware. The keyed-to-KA915 configuration ties this specific lock to the KA915 stock key number, which matches other KA915 N Series units when the same key code is specified. The ANSI/BHMA A156.11 Grade 1 performance rating makes the lock suitable for drawer locations where a tested performance standard is required by spec.

Keying, Rekeying, And Function For Repeatable Results

The rekeyable design uses a set screw cylinder release mechanism, so the cylinder can be removed and reconfigured as keying needs change during the life of the installation. This supports projects that start with stock KD or KA 4-pin keying and later move to a masterkeyed 5-pin standard layout or a grand masterkeyed system while keeping the same lock body in place. The standard function allows the key to be removed when the lock is either in the locked or unlocked position, which suits users who need to retain the key after opening but do not need a captive key arrangement. Because this function is non-handed, the same lock model can be used on drawers oriented to either side without selecting separate left- or right-hand versions. For installations that call for a key removable only in the locked position, that variant is available via direct ship, allowing a different operating pattern when the specification requires it.

Common Questions About The N Series Drawer Deadbolt Lock

Select This KA915 N Series Deadbolt For Drawer Projects

The Olympus N Series pin tumbler deadbolt drawer lock with satin brass finish, KA915 keying, and 7/8 inch barrel diameter provides a defined option for drawers requiring a deadbolt. Cylinder length choices of 15/16 inch, 1-3/8 inch, or 1-5/8 inch align with different drawer front builds. The rekeyable design with a set screw cylinder release mechanism supports long-term keying changes without swapping the lock body. With ANSI/BHMA A156.11 Grade 1 performance and N Series keyway compatibility, this lock fits projects that specify a tested deadbolt drawer lock tied to the N Series key system.