N Series Pin Tumbler Deadbolt Drawer Lock, Oil Rubbed Bronze, Keyed to KA107 Key, 15/16" Cylinder Length

N Series Deadbolt Drawer Lock For Secure Use

N Series pin tumbler deadbolt drawer lock identifies this Olympus Lock, Inc. unit as part of the N Series system, which matters when matching it with other locks on the same keyway across a project. The 15/16 inch cylinder length focuses this specific version on drawer or panel applications that need that cylinder reach through the material and trim. The cylinder uses a solid brass pin tumbler design, which provides a known mechanical format for key control and long-term service in typical woodworking environments. The body is zinc die cast, so the lock case brings a rigid, dimensionally stable housing around the cylinder. The oil rubbed bronze finish presents a dark, low-sheen appearance that pairs with similar decorative hardware on cabinets and casework. This lock is keyed to KA107, giving you a defined keyed-alike group for jobs built around that KA number.

Key Deadbolt Drawer Lock Details For Jobs

• The deadbolt lock is part of the N Series system, so it can be keyed together with other N Series locks, which helps when one project needs multiple locking points operating from the same keyway family.
• The lock is easily rekeyable via a set screw cylinder release mechanism, allowing cylinders to be changed on-site when keying plans are updated during tenant changes or security revisions.
• The product passed ANSI/BHMA A156.11 Grade 1 performance requirements and is equivalent to E07041(200DW), giving installers a performance benchmark when selecting hardware for demanding commercial cabinetry.
• The standard function keeps the key removable in locked or unlocked position, so users can operate the drawer without needing to leave the key in place, which simplifies everyday operation in offices or shops.
• The standard function locks are non-handed, meaning they work in both left and right-hand drawer layouts, reducing sku variation and simplifying hardware planning across a bank of casework.

Deadbolt Drawer Lock Fit, Keying, And Core Setup

The barrel diameter is 7/8 inch, providing a specific hole size target in the drawer or panel so the lock seats correctly and supports the face hardware. Cylinder length options of 15/16 inch, 1-3/8 inch, or 1-5/8 inch give a range of engagement depths, supporting different material thicknesses across cabinet lines. The keyway is N Series, equivalent to the National D4291 4-pin or D4292 5-pin system, so locksmiths familiar with those systems can match keying layouts. Stock keying is KD/KA 4 pin standard, which defines how cylinders ship for keyed-different or keyed-alike setups on typical projects. Stock KA numbers 101, 103, 107, and 915 identify common keyed-alike groups, so KA107 ties directly into that organizing scheme.

How This Olympus N Series Drawer Deadbolt Works

Deadbolt Drawer Lock Use In Cabinet Projects

This product sits in the Wurth Baer Supply range as a deadbolt lock for drawers under the Locks and Latches and Deadbolt Locks categories, so it aligns with cabinet and woodworking applications. As a drawer-focused deadbolt lock, it secures the drawer by driving a deadbolt from the zinc die cast body when the key is turned, which offers positive engagement when the drawer is shut. The oil rubbed bronze finish coordinates with darker decorative pulls or hinges, giving casework a consistent look where visible lock faces matter. With a cylinder length specified at 15/16 inch, this version addresses drawer or panel builds where that exact length provides the right balance between front face seating and rear bolt reach. Within the Olympus N Series family, KA107 ties this lock to a specific keyed-alike set, so multiple drawers on a job can be arranged to open from the same KA107 key pattern.

Keying, Rekeying, And Repeatable Performance Details

The N Series pin tumbler deadbolt drawer lock uses a solid brass pin tumbler cylinder, so it accepts standard N Series keying work and supports long-term service where rekeying may be required over the life of the installation. The easy rekey feature via a set screw cylinder release mechanism means the cylinder can be removed and reconfigured without replacing the entire zinc die cast lock body, which reduces hardware waste and labor when keys change. With stock keying as KD/KA 4 pin standard, the lock arrives ready for typical keyed-different or keyed-alike schemes while still supporting 5 pin masterkeyed and grand masterkeyed options when projects demand tiered access. Passing ANSI/BHMA A156.11 Grade 1 performance requirements signals that the lock has been tested against a recognized deadbolt standard, which matters when specifiers align drawer security components with commercial-grade expectations.

Common Questions About This N Series Drawer Lock

Select This Deadbolt Drawer Lock For N Series Jobs

This Olympus Lock, Inc. N Series pin tumbler deadbolt drawer lock in oil rubbed bronze pairs a zinc die cast body with a solid brass cylinder, giving cabinet and fixture projects a defined 7/8 inch barrel diameter and 15/16 inch cylinder length. The ANSI/BHMA A156.11 Grade 1 performance listing and N Series keyway, equivalent to National D4291 or D4292 systems, support commercial-grade drawer locking plans. For jobs organized around KA107 keyed-alike groups, this lock aligns directly with that stock KA number.