N Series Pin Tumbler Deadbolt Drawer Lock, Satin Brass, Keyed to KA103 Key

N Series Pin Tumbler Deadbolt Drawer Lock Use

N Series pin tumbler deadbolt drawer lock from Olympus Lock, Inc. is a drawer deadbolt that secures casework with a solid locking bolt, giving cabinet builders a keyed control point for drawers that need restricted access. The lock uses an N Series keyway, which ties into National D4291 4-pin or D4292 5-pin systems, so shops already on that platform can maintain one key system across multiple openings. A satin brass finish presents a traditional hardware look on exposed drawer fronts, which helps match common brass-based hardware programs in commercial and residential millwork. The zinc die cast body provides a rigid housing for the deadbolt mechanism, supporting repeatable lock action under frequent use. A solid brass pin tumbler cylinder forms the core locking element, so key changes and master keying follow standard pin tumbler practices installers already know.

Deadbolt Drawer Lock Details That Matter On Site

• The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin, lets the lock be keyed together with other N Series locks, so a single key can control multiple drawers in the same installation.
• Stock keying as KD/KA with 4-pin standard and stock KA numbers 101, 103, 107, and 915 supports job layouts where some locks are individually keyed and others share a key, simplifying keying schedules.
• The KA103 keyed variant ties into a common stock KA number, which helps facilities align this drawer deadbolt with existing KA103 keyed openings when expanding millwork or replacing older locks.
• A rekeyable design using a set screw cylinder release mechanism lets the cylinder be changed in the field, so key systems can be updated without changing the entire deadbolt body.
• Passing ANSI/BHMA A156.11 Grade 1 performance requirements, equivalent to E07041(200DW), indicates the lock has been tested for demanding cycle and security performance, which suits high-use drawers.
• The key-removable-in-locked-or-unlocked-position standard function supports job scenarios where keys are managed offsite yet the drawer may remain open or closed without trapping the key.

Drawer Deadbolt Installation And Cylinder Options

The deadbolt drawer lock uses a barrel diameter of 7/8 inch, so boring operations can be standardized around that hole size when laying out drawer fronts. Cylinder length options of 15/16 inch, 1-3/8 inch, or 1-5/8 inch allow the installer to match cylinder projection to varying drawer front thicknesses, helping the front escutcheon area sit correctly while maintaining adequate thread engagement. The zinc die cast body gives the installer a stable case to fasten into the drawer, which supports consistent alignment of the deadbolt throw relative to the strike. With a standard function where the key is removable in both locked and unlocked positions, the lock can be positioned so users can remove the key after locking the drawer or after leaving it open, which suits different operating policies.

Using This KA103 Keyed N Series Deadbolt

Where This Drawer Deadbolt Lock Fits Best

This Olympus deadbolt drawer lock is keyed to the KA103 key number within the N Series system, which works well on projects already using KA103 keyed cylinders. Because it can be keyed together with other N Series locks, it suits banks of drawers in casework where shared key control is needed. The satin brass finish aligns with applications where visible lock hardware needs to coordinate with brass-toned pulls and hinges. With ANSI/BHMA A156.11 Grade 1 performance, equivalent to E07041(200DW), the lock fits high-traffic commercial millwork such as office, hospitality, or institutional cabinetry where drawers are opened and locked repeatedly.

How Rekeyable Design Supports Repeatable Results

The rekeyable cylinder, released by a set screw cylinder release mechanism, lets shops change keying without disturbing the mounted lock body, which helps preserve alignment between the deadbolt and strike over time. The solid brass pin tumbler cylinder provides a familiar pinning platform for 4-pin stock keying and 5-pin masterkeyed systems, so locksmiths and millwork shops can configure key hierarchies using common pinning practices. Its ability to be masterkeyed at 5 pin and grand masterkeyed provides structured access control across multiple rooms or departments while keeping the same physical lock case. The 7/8 inch barrel diameter and range of cylinder lengths simplify repeat installations because boring patterns and hardware selection can remain consistent across projects, reducing layout changes from one job to another.

Common Questions About This N Series Drawer Lock

Selecting This KA103 N Series Drawer Deadbolt

Choose the N Series pin tumbler deadbolt drawer lock, satin brass, keyed to KA103, when a drawer needs a keyed deadbolt tied into an N Series system. Match the 7/8 inch barrel diameter and available 15/16 inch, 1-3/8 inch, or 1-5/8 inch cylinder lengths to the drawer construction so the cylinder seats correctly. Use its KD/KA stock keying, KA103 key number, and 4-pin or 5-pin pinning options to align the lock with project key plans. Rely on its ANSI/BHMA A156.11 Grade 1 performance rating for drawers expected to see frequent locking cycles.