Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
N Series pin tumbler deadbolt drawer lock is a solid brass cylinder, zinc die cast body lock designed to secure drawers where a deadbolt is preferred. The deadbolt design extends a strong bolt into the strike, which helps resist prying on drawer fronts in typical cabinet installations. The oil rubbed bronze finish presents a darker, traditional appearance that can coordinate with similar decorative hardware on casework. This lock is keyed to KA915, which allows drawers set up on that key number to be operated with the same key in a keyed-alike system. The lock uses the N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, so keying can match other N Series keyed locations. The solid brass pin tumbler cylinder supports smooth key operation over time in regular drawer use.
The N Series pin tumbler deadbolt drawer lock uses a 7/8 inch barrel diameter, so installers can drill consistent round bores and seat the body solidly in the drawer front. The available cylinder lengths of 15/16 inch, 1-3/8 inch, or 1-5/8 inch let the installer match the lock body depth to the material stack, which helps the face sit flush while keeping enough thread engagement behind the front. The rekeyable design, using a set screw cylinder release mechanism, allows the cylinder to be swapped or rekeyed without replacing the whole lock body, which saves time when a keying plan changes. The standard function, with key removable in locked or unlocked position, supports flexible operating procedures where staff may prefer to remove the key after either locking or unlocking.
This Olympus Lock, Inc. N Series deadbolt drawer lock suits cabinet drawers that require key control using the N Series keyway. The KA915 keyed setup allows multiple drawers to follow the same key number within a keyed-alike group, which is useful in work areas where one key should operate many drawers. Stock keying as KD/KA with 4 pin standard lets installers order keyed-different or keyed-alike arrangements to match a project key schedule. The availability of masterkeyed 5 pin standard and grand masterkeyed options means this lock can participate in broader key systems where different user groups access different drawer sets under a higher-level key structure. The passing of ANSI/BHMA A156.11 Grade 1 performance requirements, equivalent to E07041(200DW), indicates suitability for demanding commercial, institutional, or heavy-use cabinetry.
The rekeyable cylinder, released via a set screw cylinder release mechanism, allows changes to the keying without removing the entire lock body from the drawer front, which reduces disruption to finished cabinetry. The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin, means the lock operates within a known key system standard, which simplifies planning when coordinating with other N Series locking points in the same facility. The solid brass pin tumbler cylinder is designed for precise pin stacks, supporting consistent key turning feel across many locks keyed to the same KA number. The zinc die cast body encloses the deadbolt and cylinder firmly, which maintains alignment between the key plug and bolt over time. The standard function, where the key is removable in locked or unlocked position, supports workflows where staff lock a drawer and remove the key, or unlock and retain or remove the key according to local procedures, without changing hardware.
The 200-10B158-915 is an Olympus Lock, Inc. N Series pin tumbler deadbolt drawer lock with a solid brass cylinder and zinc die cast body for securing cabinet drawers.
The lock is keyed to KA915 within the N Series system, so multiple locks set to KA915 can be operated by the same key in a keyed-alike group.
The N Series pin tumbler deadbolt drawer lock is available with cylinder lengths of 15/16 inch, 1-3/8 inch, or 1-5/8 inch, covering a range of drawer front thicknesses.
The lock uses a 7/8 inch barrel diameter, so the drawer front requires a 7/8 inch round bore to seat the lock body correctly.
The N Series pin tumbler deadbolt drawer lock is rekeyable via a set screw cylinder release mechanism, allowing cylinder changes without changing the entire lock body.
The lock passed ANSI/BHMA A156.11 Grade 1 performance requirements, equivalent to E07041(200DW), indicating high performance for demanding drawer applications.
The N Series pin tumbler deadbolt drawer lock in oil rubbed bronze pairs an Olympus Lock, Inc. Grade 1 deadbolt design with N Series keying flexibility for cabinet drawers. With cylinder length options of 15/16 inch, 1-3/8 inch, or 1-5/8 inch and a 7/8 inch barrel diameter, it supports consistent boring and fit across a range of drawer fronts. The rekeyable solid brass cylinder, KA915 keyed-alike capability, and optional masterkeyed and grand masterkeyed arrangements let this lock serve both small projects and larger keyed systems. For drawers requiring a deadbolt and N Series keyway, this lock offers a defined, standards-based solution ready for cabinet shop or field installation.
Sold In: 1 Each
