Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
N Series pin tumbler deadbolt gives you an Olympus Lock, Inc. door lock built around the N Series key system, so one key platform can serve multiple N Series locks on the same project. The solid brass pin tumbler cylinder provides a precision keying interface that supports both 4-pin and 5-pin N Series setups, helping locksmiths match existing master key systems accurately. A zinc die cast body creates a stable housing for the cylinder, which supports consistent deadbolt action during repeated locking and unlocking. The oil rubbed bronze finish delivers a specific visual match where that finish is required across doors and trim, keeping hardware appearance consistent. This deadbolt is master keyed/keyed different, so it can support a master key hierarchy while still giving individual doors their own change keys on N Series keyways.
This deadbolt uses a set screw cylinder release mechanism that allows the cylinder to be rekeyed, so the locking core can be changed without replacing the full lock body. The key removable in locked or unlocked position standard function means the key can be withdrawn after locking or unlocking, which supports typical door operation where users lock and then remove the key. A non-handed standard function layout allows the same lock design to work on either side orientation of a door, reducing part variation in mixed-door projects. Cylinder lengths of 15/16 inch, 1-3/8 inch, or 1-5/8 inch and a 7/8 inch barrel diameter give the dimensional basis for preparing door bores and matching cylinder extension to door thickness.
The manufacturer part number 100-10B138-KDMK identifies this N Series pin tumbler deadbolt as part of the Olympus Lock, Inc. N Series family, which allows it to share keying with other N Series locks on the same job. Because it can be keyed together with other N Series locks, it fits projects where a door deadbolt needs to operate on the same N Series key as related hardware. The oil rubbed bronze finish ties this deadbolt to openings where that finish is used across knobs, levers, hinges, and visible trim, supporting a consistent appearance on visible door faces. Being in the deadbolt locks product class, it serves as a dedicated deadbolt component in a door hardware set, separating latch function from deadbolt security where that layout is specified.
Passing ANSI/BHMA A156.11 Grade 1 performance requirements, equivalent to E07121(100DR), positions this deadbolt in a performance category intended for demanding service, which matters on doors that see frequent locking and unlocking. The solid brass pin tumbler cylinder offers a stable pin chamber material, supporting repeatable key turning and rekeying in both 4-pin and 5-pin N Series configurations. The zinc die cast body provides a rigid structure that holds the cylinder at the correct alignment, supporting smooth bolt operation when the key is turned. The rekeyable set screw cylinder release mechanism lets technicians change cylinders on site within the same housing, helping them adapt keying as access requirements change while retaining the deadbolt body already fitted to the door. Key removable in locked or unlocked positions supports typical routines where users lock, withdraw the key, and leave the door secured, or unlock, remove the key, and keep the opening available without leaving the key in the cylinder.
This deadbolt uses the N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, so it matches other N Series locks using the same key platform.
This deadbolt can be keyed together with other N Series locks, allowing one N Series key to operate multiple locks in the same keyed-alike group.
This deadbolt uses a set screw cylinder release mechanism, so the cylinder can be removed and rekeyed while using the same deadbolt body already installed.
This deadbolt offers cylinder lengths of 15/16 inch, 1-3/8 inch, or 1-5/8 inch with a 7/8 inch barrel diameter, giving dimensional options relative to door preparation.
This deadbolt has passed ANSI/BHMA A156.11 Grade 1 performance requirements, equivalent to E07121(100DR), indicating it is tested to that performance level.
This deadbolt has a standard function where the key is removable in the locked or unlocked position, supporting typical door locking and unlocking routines.
The Olympus N Series pin tumbler deadbolt with oil rubbed bronze finish combines an N Series keyway, rekeyable set screw cylinder release, and ANSI/BHMA A156.11 Grade 1 performance requirements in one lock. When a project calls for an N Series key system, oil rubbed bronze finish, and a deadbolt body built around solid brass pin tumbler construction with zinc die cast housing, this 100-10B138-KDMK deadbolt provides that specific combination for door security and coordinated keying.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  OYKB-GM2MK-NP Mfr# KB-GM2MK-NP | N Series master key for keyed alike GM2 |
