Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Olympus interchangeable core cam lock gives installers a cam lock body designed to accept small format interchangeable cores, so keyed control follows the core system already on site. The 1-1/8 inch cylinder diameter positions the lock for standard cam lock prep dimensions, which simplifies layout on doors and drawers that follow common boring patterns. Across flats at 7/8 inch defines the wrenching surface, helping keep orientation consistent when tightening into prepared holes. A maximum material thickness of 1-1/8 inch and minimum of 0.08 inch set the working clamping range, so you can match the body to panels from thin metal to thicker casework. Zinc die cast body construction provides a solid housing around the interchangeable core, supporting repeatable cam movement during daily use.
The 1-1/8 inch cylinder diameter of the Olympus cam lock body defines the hole size required, so boring operations can be set accurately on new panels or matched to existing holes during retrofit work. Across flats at 7/8 inch affects how the body seats in the opening, helping the lock resist rotation once tightened. The maximum material thickness of 1-1/8 inch and minimum of 0.08 inch establish the clamping envelope, so installers can select this body for metal, laminate, or wood doors that fall within that range. Working within that defined thickness window supports consistent thread engagement and cam alignment behind the panel.
This cam lock body retrofits Best 1E7E4, so it aligns well with commercial and institutional openings already set up for that interchangeable core pattern. The design accepts small format interchangeable cores from Best, Arrow, Falcon, KSP, or Schlage SFIC, which ties the lock body directly into existing key systems that use those core families. Compatibility with Medeco Nexgen XT or VIDEX Cyber electronic cylinders extends use into openings where electronic small format interchangeable cores are specified, giving a mechanical housing that works with those cylinders. Maximum and minimum material thickness values from 1-1/8 inch down to 0.08 inch mean it can be applied on thin metal panels as well as thicker cabinet doors, allowing one body style to cover multiple casework and fixture types.
The Olympus cam lock body provides parts for either key-retaining or non-key-retaining function, so the same body can be configured to keep the key captured when the cam is turned or allow removal in multiple positions, depending on the opening requirement. Accepting small format interchangeable cores lets locksmiths and facility teams swap cores while leaving the body and cams in place, which keeps re-key projects focused on the core rather than full hardware replacement. Passing ANSI/BHMA A156.11 Grade 1 performance requirements confirms the body has been tested to a recognized cam lock standard, supporting consistent operation over time in doors and drawers that see frequent cycles. The zinc die cast construction surrounds the interchangeable core and cam shifters with a rigid housing, helping maintain cam travel and key rotation alignment throughout the lock service life.
The cam lock body accepts Best, Arrow, Falcon, KSP, Schlage SFIC or equivalent small format interchangeable cores, so it ties directly into those interchangeable core key systems.
The material thickness range from 0.08 inch to 1-1/8 inch defines which doors, drawers, or panels the body can clamp onto, guiding selection for metal fixtures and cabinet work.
The cam lock passing ANSI/BHMA A156.11 Grade 1 performance requirements indicates it has been tested to a recognized cam lock standard for operation and durability.
The cam lock provides parts for a key-retaining function, so it can be configured to hold the key when locked, which supports openings that must not be left unsecured.
The Olympus cam lock retrofits Best 1E7E4, so it is commonly applied in openings originally built around that interchangeable core cam lock format.
The cam lock body is compatible with Medeco Nexgen XT and VIDEX Cyber electronic cylinders, so it can support electronic small format interchangeable core systems.
The Olympus interchangeable core cam lock body with 1-1/8 inch cylinder diameter gives installers a defined fit range and core interface for cabinet, fixture, and door projects. By retrofitting Best 1E7E4 and accepting common small format interchangeable cores, it supports both mechanical and electronic key systems on new work and replacements. Use the specified cylinder diameter, across flats dimension, and material thickness range to align this body with your panel prep and thickness, then apply its key-retaining or non-key-retaining configuration where that behavior best supports the opening.
Sold In: 1 Each
