1-9/16" Pin Tumbler Offset Cam

1-9/16" Pin Tumbler Offset Cam For Lock Work

1-9/16" pin tumbler offset cam describes a pin tumbler cam sized for pin tumbler lock bodies, giving you a defined cam profile that transfers key rotation into latch movement for controlled locking in cabinet or casework applications. The Olympus Lock, Inc. branding identifies the manufacturer, which supports consistent matching with other Olympus Lock components on a job where you are standardizing parts. The pin tumbler cam product class tells you this part is designed to work with pin tumbler style cylinders, so its motion is suited to common commercial and shop lock layouts. The DCP-114-18 manufacturer part number provides a precise reference when you are replacing a worn cam or duplicating an existing hardware setup, helping you maintain the same lock behavior across multiple doors or drawers.

Offset Cam Details That Support Lock Performance

• The 1-9/16" pin tumbler offset cam length described in the web name defines the reach of the cam throw, which affects how far the locking bar or strike is driven when the key is turned, impacting secure engagement.
• The 1-1/4 inch length noted in the SAP description specifies another dimensional reference for this DCP offset cam, helping you align the cam arm length with your existing lock layout so the latch contacts the strike where you expect.
• The 1/8 offset stated in the SAP description indicates that the cam face is offset from the lock centerline, allowing you to position the cam closer to or farther from the cabinet frame for better alignment with fixed strikes or keeper hardware.
• The DCP offset cam designation in the SAP description identifies this piece within the Olympus Lock pin tumbler cams family, which simplifies matching it to compatible lock bodies in the same series for consistent actuation.

Pin Tumbler Cam Fit And Offset Alignment

The pin tumbler cams product class defines this part as the rotating element on a pin tumbler lock, so its orientation and throw directly influence how smoothly the cylinder operates the locking point on a cabinet, drawer, or similar fixture. The 1/8 offset called out in the SAP description positions the cam arm away from the cylinder centerline, which helps you line up the locking bar or strike contact with hardware that is not perfectly centered behind the cylinder hole. The Olympus Lock, Inc. manufacturer reference means this cam follows Olympus patterns for pin tumbler cams, aiding installers who are building or servicing runs of locks built around Olympus components.

Using The DCP-114-18 Offset Cam In Lock Projects

Where This Olympus Pin Tumbler Cam Fits Best

The lock accessories category places this 1-9/16" pin tumbler offset cam in the supporting hardware group for locks and latches, so it serves as the rotating arm that turns cylinder motion into movement against a strike or locking bar. The DCP-114-18 manufacturer part number defines this specific offset cam geometry within the Olympus Lock line, which is useful when matching cams across multiple doors or casework sections to keep throw and reach identical. The 1/8 offset described in the SAP text lets the cam sit slightly off-center relative to the cylinder, helping you reach strikes or locking bars that are shifted from the cylinder bore without changing the cylinder location. The 1-1/4 inch length dimension in the SAP description gives another scale reference for installers who are coordinating cam length to interior clearances, allowing the cam to sweep across the correct engagement point without hitting nearby structure.

Offset And Length Supporting Repeatable Lock Results

The 1-9/16" dimension in the web description establishes the overall cam size for planning throw and reach, so lock function stays consistent from one installation to the next when you repeat this cam across a run of cabinets or drawers. The 1-1/4 inch length noted in the SAP description refines that size information for situations where the precise length of the arm affects whether the cam passes behind a frame, a mullion, or a strike plate during rotation. The 1/8 offset specified for this DCP offset cam gives you a known distance between the cylinder centerline and the cam bearing surface, which helps when you are aligning engagement with straight or angle strikes that sit slightly forward or back. The Olympus Lock, Inc. identity plus the DCP-114-18 part number create a consistent reference for service work, allowing you to specify or reorder the same cam so future lock maintenance preserves the original operating geometry.

Common Questions About The DCP-114-18 Offset Cam

Selecting This Offset Cam For Your Lock Layout

The 1-9/16" pin tumbler offset cam description, combined with the 1/8 offset and 1-1/4 inch length from the SAP text, gives you clear dimensional cues for planning lock motion in cabinets or casework. The Olympus Lock, Inc. name and DCP-114-18 part number tie this cam directly to a defined pin tumbler cam design, supporting consistent lock performance when you specify identical parts across multiple openings. For projects calling for a pin tumbler cam that provides known offset and reach, this DCP offset cam offers a defined geometry you can match to your lock layout needs.