Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Panolam AW1410 Rock of Ages laminate postform grade, 30"x144" Natural Stone Finish sets up a continuous decorative surface across long runs, so counters or panels follow layout lines without mid-span seams. The 30" width works well for many countertop and work surface depths, which helps align edges and front profiles to standard cabinet footprints. The 144" length reduces field joints in straight applications, saving layout time on repetitive commercial projects. This product is identified as laminate postform grade, so fabricators can bend it over approved radii during postforming operations to carry the decorative face around edges. The Natural Stone Finish provides the specified visual from Panolam's Rock of Ages design, giving a consistent appearance from sheet to sheet on the job.
The Panolam AW1410 Rock of Ages laminate postform grade designation means the laminate system is suited to postforming processes, so shop crews can wrap specified profiles without switching materials mid-run. The 30"x144" panel size supports full-length counter runs, allowing templates to be laid out along one direction with fewer cross cuts. Because the melamine resin decorative paper is fused to industrial grade particleboard or medium density fiberboard (MDF), the panel responds predictably to saws and routers during sizing, sink cutouts, and notching. Having decorative faces on both sides simplifies layout for components that may be flipped during fabrication, because either face can serve as the show surface without disrupting the Rock of Ages pattern alignment.
Panolam AW1410 Rock of Ages high-pressure laminate uses a melamine resin impregnated decorative paper as the face layer, so designers get a controlled Rock of Ages pattern grounded in Panolam's system. When that decorative layer is fused to an industrial grade particleboard or MDF core, the resulting panel can be used where a hard, decorative surface is required in cabinets, counters, or vertical surfaces. The Natural Stone Finish on this AW1410 design gives a specified visual tied to Panolam's Rock of Ages look, helping projects maintain a consistent appearance where multiple panels meet. Because decorative faces are supplied on both sides, this same Rock of Ages design carries through on the back of doors, partitions, and other components where both sides remain visible. The 30"x144" format keeps that finish running along extended sections, reducing visual breaks on long straight runs.
This Rock of Ages laminate postform grade panel is identified as high-pressure laminate, so it is built to handle standard HPL machining steps such as cutting, routing, and edge profiling during shop work. The melamine resin decorative paper is thermally fused to the industrial grade particleboard or MDF core, creating a stable bond that stays intact as bits and blades move through the panel. Having decorative faces on both sides removes guesswork when orienting parts, so nested components can be rotated during cutting without losing a finished show face. The 30" width and 144" length dimensions provide predictable stock sizing, which helps drafters and CNC programmers nest parts efficiently while controlling Rock of Ages pattern direction. Under the Panolam HPL category and PF39AW1410NS0200 part number, this laminate stays clearly identified for repeat orders on future phases of the same project.
Panolam AW1410 Rock of Ages laminate is a high-pressure laminate design that uses a melamine resin decorative paper fused to an industrial grade particleboard or MDF core for decorative surfacing.
The laminate postform grade designation means the product is suited to postforming operations, so fabricators can bend the decorative surface over specified profiles during countertop and edge fabrication.
The product is supplied as a 30"x144" panel, which supports long, straight runs and allows layouts that reduce seams along typical countertop and work surface lengths.
Decorative faces on both sides means both faces carry the Rock of Ages design, so components like partitions and doors have a finished look on the front and back.
The Rock of Ages surface uses a melamine resin impregnated decorative paper that is thermally fused to an industrial grade particleboard or MDF core, creating a unified decorative panel.
The Natural Stone Finish option provides the specified Rock of Ages appearance, so visible surfaces carry a consistent natural-stone-inspired look within the Panolam AW1410 design family.
The Panolam AW1410 Rock of Ages laminate postform grade, 30"x144" Natural Stone Finish panel combines a high-pressure laminate face with an industrial grade particleboard or MDF core, so shop crews can fabricate decorative surfaces within the Panolam HPL system. Decorative faces on both sides, the 30"x144" format, and the PF39AW1410NS0200 identification all support projects that repeat this Rock of Ages look across phases. For jobs calling for a consistent Rock of Ages Natural Stone Finish on high-pressure laminate panels, this Panolam AW1410 sheet aligns design intent with practical fabrication needs.
Sold In: 1 Sheet