Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
HandiKITS starter kit 4 ft panels gives you a matched HandiSOLUTIONS Handiwall surface and hook set in one system, so you can build a 48 x 96 wall section that is ready to organize tools and supplies. The kit uses eight pieces of 4 ft Handiwall to cover that 48 x 96 area, creating a continuous vertical storage zone that turns an unused wall into working space. Eight pieces of color coded J molding finish the edges, so the installation has a clean perimeter and defined boundary against adjacent surfaces. The kit uses color coded 1-5/8 inch drywall screws, tying the fasteners visually to the panels and trim so layout and fastener checks stay straightforward during install. A basic accessory kit with a matched set of locking hooks and baskets gives immediate hanging and storage options across the new Handiwall field.
The eight 4 ft Handiwall pieces stack to fill a 48 x 96 footprint, so installers can rip, level, and fasten panels in repeated passes without reworking layout math. Color coded 1-5/8 inch drywall screws tie directly to the panel fastening step, so fastener length and type are pre-matched for typical drywall-backed wall construction. The color coded J molding pieces cap panel edges as the last step, so cut edges and transitions are hidden while preserving access to all Handiwall slots. With the HandiSOLUTIONS basic accessory kit supplied in the same system, hooks and baskets can be placed as soon as the wall field is fastened, turning the finished panel area into usable storage immediately.
The HSBWK1004WL HandiKITS wall system uses Handiwall panels sized to build a 48 x 96 section, so it fits well wherever a full sheet-sized wall bay is available. The 4 ft panel length suits wall spans that align with common framing, so installers can bridge from corner to corner or between vertical obstacles using repeated cuts. Because the kit uses J molding sized for the same footprint, the finished edges define a clear working zone that separates the Handiwall field from adjacent finishes. The accessory kit spreads hooks, loop hooks, double hooks, J hooks, notch hooks, and baskets across that field, so the entire 48 x 96 area can be assigned to hand tools, long-handled tools, and small parts storage.
Using eight identical 4 ft Handiwall pieces to reach 48 x 96 coverage standardizes each course, so once the first panel row is level, every additional row follows the same reference, reducing layout rework. The color coded J molding aligns visually with the panels, so cutting and fitting trim around the finished field stay intuitive and help maintain straight perimeter lines. Color coded 1-5/8 inch drywall screws give a single fastener type for hanging the Handiwall, so crews do not sort screw bins while working down the wall. The basic accessory kit is built around the Handiwall pattern and uses locking hooks, so when installers snap hooks and baskets into place they stay engaged as loads are repositioned across the storage field over time.
The HSBWK1004WL HandiKITS starter kit uses eight pieces of 4 ft Handiwall to cover a 48 x 96 wall area, turning a full sheet-sized section into slotted storage space.
The Handiwall J molding pieces are color coded and sized to trim the panel edges, so they cap cut ends and create a finished border around the 48 x 96 wall field.
The HandiKITS starter kit uses 1-5/8 inch color coded drywall screws, so fastening to prepared wall surfaces uses a consistent screw length and appearance across the field.
The HandiSOLUTIONS locking hooks engage the Handiwall slots and lock in place, so hanging tools stays stable when tools are removed or bumped during regular use.
The basic accessory kit uses a combination of double hooks, loop hooks, J hooks, notch hooks, and baskets, so the Handiwall field can support both hanging tools and bulk items.
The HandiKITS starter kit uses one 8 x 12 basket and one 12 x 24 basket, so both smaller parts and larger items can be stored within the same Handiwall area.
The HSBWK1004WL HandiKITS starter kit from HandiSOLUTIONS delivers Handiwall panels, matching J molding, color coded drywall screws, and a basic accessory kit in one coordinated system, so a 48 x 96 wall section becomes organized storage with a single selection. The blend of 4 ft Handiwall pieces and locking hooks creates a structured surface where hooks, baskets, and specialty holders can be positioned and repositioned across the panel field as needs change. For projects calling for a defined storage zone using a consistent Handiwall pattern, this starter kit provides the matched wall surface, trim, fastening, and hanging components to build out that area in a single step.
Sold In: 1 Kit