Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge bullnose molding gives a finished look on all sides of laminate projects, so countertops, islands, desks, and work stations present a clean, continuous edge instead of exposed substrate. The 3476-46 Jet Sequoia Etchings finish matches the corresponding Formica pattern, which helps the edge visually blend with the laminate top for a more unified appearance. The 1-1/2 inch high profile covers standard edge build-ups, helping conceal core material while keeping the laminate design consistent. This molding uses a moisture barrier MDF core, which resists everyday moisture at the edge line and supports long-term edge integrity. The 12 foot length supports longer runs in one piece, which reduces field joints along the edge. IdealEdge is part of Formica Corporation's laminate edge moldings line, so it integrates into typical laminate fabrication workflows where a decorative, curved bullnose profile is required.
This Formica IdealEdge molding is designed for use with laminate fabrication methods, so installers bond the moisture barrier MDF core to prepared substrate using the recommended AFF522 series glue. The 1-1/2 inch height provides coverage for standard build-ups, which helps align the bullnose radius with the laminate deck for a continuous curve. Because it is suitable for straight, curved, clipped, and 90 degree edges, fabricators can run one profile around corners and softer radius sections, simplifying layout and cutting. The 12 foot length supports planning longer runs with fewer joints, which can streamline trimming and finishing along the front edge of countertops, islands, desks, and work stations.
This Formica IdealEdge 3476-46 Jet Sequoia Etchings finish molding is engineered for laminate countertops, islands, desks, and work stations, so it fits naturally into residential or commercial laminate projects using the Jet Sequoia pattern. The 1-1/2 inch bullnose profile provides a rounded front that works along straight runs as well as at 90 degree corners, allowing one detail to transition from a main counter into return legs or peninsula sections. Because it is suitable for curved and clipped edges, installers can apply it to softer island corners or shaped desk fronts where a continuous bullnose is desired. The moisture barrier MDF core supports use around everyday sink, prep, or task areas by resisting routine ambient moisture at the edge line, which helps preserve the front profile where users frequently contact the surface.
The IdealEdge construction and specified glue combination give fabricators a defined system: the moisture barrier MDF core bonds using the recommended AFF522 series glue, so installers work with known materials when adhering the edge to substrate. The 12 foot length allows dry-fitting and cutting longer sections, which can reduce alignment challenges at seams and provide a more uniform bullnose curve across large counters. The 1-1/2 inch high profile helps position the bullnose radius in relation to the laminate deck consistently, which is important when repeating the same profile across multiple tops or stations. Because this bullnose edge molding is part of Formica Corporation's laminate edge moldings family, its dimensions and Jet Sequoia finish are coordinated with the matching laminate, helping shops deliver repeatable, pattern-matched results across jobs that specify this design.
The Formica IdealEdge bullnose molding measures 1-1/2 inches high and 144 inches long, giving enough height for common build-ups and a 12 foot run suitable for many countertop or work surface edges.
The Jet Sequoia IdealEdge molding is for countertops, islands, desks, and work stations, so it serves as the decorative, finished front edge in laminate projects using the matching pattern.
The moisture barrier MDF core provides a stable edge substrate that resists typical ambient moisture at the edge, supporting long-term performance where users rest arms or contact the front profile.
This IdealEdge bullnose is suitable for straight, curved, clipped, and 90 degree edges, so installers can run one continuous profile along fronts, corners, and gentle radius sections.
The recommended glue for this edge molding is the AFF522 series, which Formica specifies to bond the moisture barrier MDF core to typical laminate substrates in these applications.
The 3476-46 Jet Sequoia Etchings finish coordinates with the matching Formica pattern, helping the bullnose edge visually blend with the laminate surface for a continuous, unified appearance.
This Formica IdealEdge 3476-46 Jet Sequoia Etchings bullnose molding combines a moisture barrier MDF core, 1-1/2 inch profile height, and 12 foot length to serve laminate countertops, islands, desks, and work stations. When a project specifies the Jet Sequoia pattern and calls for a rounded front, this laminate edge molding provides a coordinated bullnose solution that works on straight runs, 90 degree corners, and curved or clipped sections.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  AFF522-1G Mfr# F-522-01 | F522 IdealEdge Fastset Wood Glue, White, 1 Gallon Jug |
