E-Z Hold spreader clamp expandable 6 describes a one handed Pony Jorgensen bar clamp designed for fast gripping on woodworking and similar projects. The 6 inch size gives a compact opening capacity that suits smaller assemblies, where a larger clamp can be awkward and slow to position around the work. The 3-3/8 inch throat depth lets the jaws reach further onto a panel or frame than shallow-throat clamps, helping apply pressure closer to the joint line so parts stay aligned while adhesives cure or components are positioned. The contoured comfort grip handle is shaped for the hand, which supports long clamping sessions by reducing finger strain during repeated tightening. A grip lever handle layout keeps the hand in one position while closing the jaws, so the operator can hold parts with the other hand and still apply clamping pressure accurately. The Pony Jorgensen brand and 33406 part number clearly identify this specific clamp for ordering and replacement in existing shop setups.
This one handed E-Z Hold bar clamp with grip lever handle is built for straightforward setup on the job. The quick release lever allows the movable jaw to slide along the bar to the approximate size of the workpiece, so final tightening takes only a few squeezes of the grip. The same mechanism makes it simple to reset for the next part in a run. When converted into a spreader clamp, the jaws act in reverse, applying force to push components apart rather than together, which is useful when spacing parts or holding pieces against stops. The 3-3/8 inch throat depth supports clamping slightly farther from an edge, giving more flexibility in where pressure is applied along cabinet sides or frames.
The 6 inch One Handed E-Z Hold Expandable Bar Clamp with Grip lever Handle, 3-3/8 inch Throat Depth fits well into woodworking tool setups that favor speed and repeatability. Its compact 6 inch capacity suits drawer boxes, face frames, small panels, and similar assemblies where long bar clamps are unnecessary. The 3-3/8 inch throat depth allows the user to reach in from an edge to clamp closer to internal joints on narrow cabinet parts or fixtures. Because the design is one handed, the operator can position parts with the other hand, which is valuable when aligning small components or holding trim while applying pressure. The ability to convert the clamp into a spreader adds flexibility in assembly jigs or light framing setups because the same tool can press parts outward against guides. As a Pony Jorgensen product in the clamps class, it integrates naturally into woodworking tool sets focused on bench work and hand tool control.
The E-Z Hold SPREADER/CLAMP, EXPANDABLE, 6 uses a contoured comfort grip to provide a secure hold while squeezing, which helps apply consistent clamping force from part to part during production runs. The quick release lever speeds jaw repositioning, so operators lose less time between assemblies and can keep a steady pace on the bench. One handed use matters when repeatable alignment is required, because the free hand can keep edges flush while the clamp is tightened, reducing the chance of twisting or offset joints. When two clamps are joined using the exclusive patented feature, the opening capacity becomes more than double that of a single clamp, so the same familiar control and feel extend to larger glue-ups or wide fixtures. The convertible spreader function allows the user to use the same control layout when pushing parts apart, which keeps handling consistent whether clamping or spreading. Together, these details support reliable, repeatable results in routine woodworking and related shop tasks.
The 6 inch One Handed E-Z Hold Expandable Bar Clamp provides a 6 inch clamping range, which suits smaller assemblies and detail work where large bar clamps are unnecessary.
The Pony Jorgensen clamp has a 3-3/8 inch throat depth, so the jaws can reach from the edge toward interior joints, helping apply pressure where it is most effective on narrow workpieces.
The E-Z Hold SPREADER/CLAMP can easily be converted into spreader clamps, so the jaws push parts apart instead of pulling them together for tasks that need outward pressure.
The quick release lever lets the jaw slide freely along the bar, allowing rapid size changes between workpieces and reducing time spent adjusting the clamp during repetitive jobs.
The exclusive patented feature allows 2 clamps to be joined together, creating a setup with more than double the opening capacity for wider panels or larger assemblies.
The one handed design with grip lever handle lets the user hold or align parts with the other hand, helping maintain joint alignment while tightening the clamp.
The Pony Jorgensen 6 inch One Handed E-Z Hold Expandable Bar Clamp with Grip lever Handle, 3-3/8 inch Throat Depth combines a compact clamping range with one handed control, quick release lever adjustment, and simple conversion to a spreader clamp. The exclusive patented feature that joins two clamps for more than double opening capacity extends its use from small parts to wider panels. For shops building a reliable clamping lineup within the clamps category, this E-Z Hold SPREADER/CLAMP, EXPANDABLE, 6 offers a practical blend of reach, control, and flexibility for everyday bench work.
Sold In: 1 Each