Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf utensil pullout organizer is a base cabinet organizer built for full height base cabinets that need organized storage for utensils and small kitchen items. This rev a shelf unit uses natural maple construction with a semi-gloss finish and includes a utensil organizer with three removable 1-1/4 qt. stainless steel bins. The design also includes one adjustable shelf for added storage flexibility. As a kitchen cabinet pull-out system, it uses full-extension concealed slides with BLUMOTION soft-close and a 110 lbs. rated slide system. The cabinet door mount organizer design mounts to the cabinet door, floor, and side, helping installers create a clean pull-out action with micro-adjustable door brackets.
Key specs to confirm: This base cabinet utensil pullout is designed for 9 inch and 12 inch full height base cabinets. The face frame version fits 1-3/4 inch, 1-1/2 inch, and 1-5/8 inch applications, while the frameless version fits 3/4 inch and 5/8 inch applications. Buyers should confirm cabinet construction type, opening size, and whether the cabinet layout supports mounting to the door, floor, and side. The verified slide system is full-extension, concealed, soft-close, and rated at 110 lbs. If any additional load, dimensional, or installation tolerances are needed, those should be confirmed with the manufacturer or technical documentation before purchase.
What's included: Verified included components are the maple organizer, one adjustable shelf, three removable 1-1/4 qt. stainless steel bins, concealed soft-close slides, and door mount brackets with micro-adjustments.
What to verify before ordering: Confirm your cabinet is a full height base cabinet, verify whether it is face frame or frameless, check the applicable frame thickness listed for this model, and make sure your installation allows door, floor, and side mounting. If you need exact overall dimensions beyond the 10-1/2 inch product reference, confirm them in technical documents for RS449UT-BCSC-10C.
A base cabinet utensil pullout is useful when a standard shelf leaves utensils piled together or hard to reach. In a busy kitchen, long tools, serving pieces, and smaller prep items can get lost in the back of a cabinet. This Rev-A-Shelf base cabinet organizer addresses that problem by pulling the contents out on full-extension concealed slides, so the user can reach stored items without bending deep into the cabinet opening.
The layout combines a maple storage frame, one adjustable shelf, and a dedicated utensil organizer with three removable stainless steel bins. That mix helps buyers separate cooking tools from loose accessories and adjust the shelf to better match what they store. For installers working on a cabinet upgrade, the cabinet door mount organizer format can create a more integrated look because the pullout works with the cabinet door rather than adding a separate interior tray only.
This soft-close utensil pullout is also practical for kitchens where quieter closing matters. The verified BLUMOTION slide system brings the organizer back into the cabinet with controlled motion. That can help reduce abrupt closing during daily use. The 110 lbs. rated concealed slides also give buyers a clear verified reference point when planning what this kitchen cabinet pull-out system will carry.
Fit matters as much as storage. This model is designed for 9 inch and 12 inch full height base cabinets, but the cabinet construction must also match the listed face frame or frameless requirements. Face frame versions fit 1-3/4 inch, 1-1/2 inch, and 1-5/8 inch applications. Frameless versions fit 3/4 inch and 5/8 inch applications. Before ordering a rev-a-shelf organizer like RS449UT-BCSC-10C, buyers should also confirm that the cabinet can accept mounting at the door, floor, and side, and that the opening is clear of plumbing, electrical runs, or other obstructions.
When buyers compare one utensil pullout organizer to another, the useful differences are usually construction, access, mounting method, and adjustability. This Rev-A-Shelf utensil pullout organizer combines natural maple construction, removable stainless steel bins, and an adjustable shelf, so it is not limited to one fixed storage layout. That matters for kitchens where tool sizes change over time.
Another point buyers often compare is slide performance. This product uses full-extension concealed slides with BLUMOTION soft-close. That means the organizer is built to extend outward for access while keeping the slide hardware less visible. The verified 110 lbs. slide rating gives a concrete specification that can be checked against the intended storage use.
Installation details also affect purchase decisions. This unit mounts to the cabinet door, floor, and side, and it includes patented door mount brackets with micro-adjustments. Those details matter because they can help with door alignment during install. For applicable face frame cabinets, the foldable slide set is specifically noted as supporting easier installation. Buyers comparing options should focus on whether the organizer matches their cabinet type, opening, and mounting conditions rather than choosing by appearance alone.
Because not every cabinet is built the same way, the safest buying approach is to compare verified fit requirements first, then compare included storage parts and slide specifications. For this maple utensil pullout organizer, the verified facts give buyers clear checkpoints without relying on assumptions.
This Rev-A-Shelf utensil pullout organizer is designed for 9 inch and 12 inch full height base cabinets, and cabinet construction details must match the listed face frame or frameless requirements.
This base cabinet utensil pullout fits face frame and frameless cabinets when the measured frame or panel thickness matches the verified fit ranges in the product data.
The Rev-A-Shelf organizer includes three removable 1-1/4 qt. stainless steel bins for utensil and small item storage.
This maple utensil pullout organizer includes one adjustable shelf to help fit different stored items.
This cabinet door mount organizer mounts to the cabinet door, floor, and side. Follow manufacturer installation guidance and local building requirements where applicable.
This soft-close utensil pullout uses full-extension concealed slides with BLUMOTION soft-close.
The verified slide system for this Rev-A-Shelf base cabinet organizer is rated at 110 lbs.
This base cabinet utensil pullout requires buyers to confirm face frame or frameless dimensions because fit depends on the listed thickness ranges.
This Rev-A-Shelf utensil pullout organizer is described for full height base cabinets, so buyers should confirm cabinet height and interior clearance before purchase.
Maple utensil pullout organizer buyers should confirm cabinet type, opening size, and mounting conditions before ordering. This Rev-A-Shelf unit includes the maple organizer, one adjustable shelf, three removable stainless steel bins, concealed soft-close slides, and adjustable door mount brackets. It is designed for full height base cabinets and uses door, floor, and side mounting, so fit is the key checkpoint. If you need exact dimensional details beyond the verified cabinet fit information, confirm them in the manufacturer documentation for RS449UT-BCSC-10C before purchase.
Sold In: 1 Each