Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
MUV 2-D flanged release levers give a drawer installation up/down, height, side-to-side, and in/out adjustment through one matched left/right lever set. This Knape and Vogt design supports installers who need precise drawer positioning. The part, identified as MUV2DF-RL, ties directly to drawer slide setups that call for MUV+ 2-D adjustment hardware. Because these levers are flanged, they provide a defined interface to the slide system when fine-tuning gap lines. The assembly allows structured tweaking without disturbing the entire drawer slide run. For face frame applications, the note that they must be blocked out highlights their role in situations where the frame offsets the slide location and the lever alignment must be maintained to keep movements accurate.
The product note that face frame applications must be blocked out shows these MUV+ 2-D flanged left/right release levers are intended to work from a stable mounting plane. In a face frame cabinet, the frame projects past the box side, so blocking restores a flat mounting surface for the levers and related slide hardware. That stable plane keeps the specified height and side-to-side adjustments consistent along the drawer travel. By matching the blocking depth to the face frame projection, the installer preserves the lever geometry described by the up/down, height, side-to-side, and in/out functions, allowing each adjustment to respond predictably when trimming reveals.
The MUV2DF-RL levers sit in the broader Knape and Vogt drawer slides and accessories range, giving a defined solution when MUV+ 2-D flanged left/right control is specified. Their role as drawer slides accessories places them in projects where fine-tuning is important, such as banks of drawers sharing a continuous countertop line. Because the levers provide up/down, height, side-to-side, and in/out adjustment, they work well wherever a cabinet opening is square enough for slides but the final front gaps still need dialing in. Installers working with face frame cabinetry apply blocking, as indicated, to bring the lever interface forward so the adjustments operate in the same plane as the frame edges. This use pattern supports both new installations and adjustments during punch-list visits.
The specified height range of plus 1/8 inch, or 3.0 mm, translates into targeted vertical movement without the need to remount the entire slide, which saves time once the cabinet is already finished. The side-to-side capability of plus or minus 1/16 inch, or 1.5 mm, is sized for the narrow reveals often seen in modern cabinetry, allowing corrections to visible gaps without altering casework. Having up/down, height, side-to-side, and in/out adjustment together means the same MUV 2-D flanged release levers can handle both depth flushness and reveal alignment in one setup. In face frame applications, blocking out as described keeps those ranges true to the design geometry so the levers respond directly to installer input. Over multiple drawers, this consistency limits repeat trips to rework front alignment.
The MUV 2-D flanged release levers provide up/down, height, side-to-side, and in/out adjustment, so installers can tune drawer vertical position, lateral gaps, and depth flushness using the same left/right lever pair.
The MUV2DF-RL levers provide height adjustment of plus 1/8 inch, or 3.0 mm, allowing small vertical corrections that help align drawer fronts with surrounding components on finished cabinetry.
The MUV 2-D flanged release levers offer side-to-side adjustment of plus or minus 1/16 inch, or 1.5 mm, which is sized to fine-tune narrow reveals along cabinet stiles.
The MUV+ 2-D flanged left/right release levers provide in/out adjustment, affecting drawer depth so the front can be set flush or slightly proud relative to the cabinet face.
In face frame applications, the note that they must be blocked out means the levers and related slides need a flat plane, so the described adjustments track accurately along the frame.
The matched left/right MUV 2-D flanged release levers let adjustments be split across both slide sides, helping keep the drawer square while altering height, lateral position, or depth.
The Knape and Vogt MUV2DF-RL assembly combines up/down, height, side-to-side, and in/out adjustment in one set of MUV 2-D flanged left/right release levers. With specified ranges of plus 1/8 inch in height and plus or minus 1/16 inch side-to-side, it supports the tight tolerances common in modern cabinetry. The note about blocking for face frame applications defines how these levers integrate into framed cabinets where the front face projects. For projects built around MUV+ 2-D adjustment hardware, this part gives a direct path to clean reveals and repeatable drawer alignment.
Sold In: 1 Set