KV8655 22" Over Travel Soft-Close Ball Bearing Drawer Slides, Unhanded Side Mount Zinc Bulk-Pack - 8655FMB 22

Knape And Vogt 22 Inch Soft Close Drawer Slides

Knape and Vogt 22 inch soft close drawer slides in the 8655 Series give a 22 inch length slide with soft-close action, helping drawers travel smoothly to a controlled shut on cabinet projects that need a finished feel. The 22 inch length sets drawer depth for medium-size cabinets where a standard kitchen or shop drawer box is common. A 140LB load rating, as referenced in the description, supports drawers in heavier-use situations where tools, hardware, or supplies add up in everyday work. The side mount design matches the Side Mount Drawer Slides product class, fitting layouts based around standard side-mounted ball bearing slides. An overtravel of 1 inch moves the drawer 1 inch past full extension, improving access to the back of the drawer in deeper cabinet carcasses. The unhanded construction lets the same 8655FMB 22 slide work on either side, simplifying layout when setting up multiple drawers.

Key 8655 Series Details For Cabinet Projects

• The 8655FMB 22 model is a ball bearing side mount drawer slide from Knape and Vogt, so it aligns with Side Mount Drawer Slides setups where full-length runners are mounted to cabinet sides for straightforward alignment.
• A 22 inch length establishes drawer box depth on medium drawers, helping installations follow consistent cabinet dimensions across kitchen, bath, or shop casework that uses similar carcass depths.
• The rated 140LB soft-close over travel slide design supports heavier drawer contents, allowing storage of tools or dense materials while the soft-close function helps manage the final inch of travel.
• Overtravel of 1 inch moves the drawer past the front of the cabinet by 1 inch, improving access to stored items at the back without changing basic cabinet face dimensions.
• A height of 2 inches defines the required vertical clearance on the drawer side, guiding drawer box sizing and placement of mounting locations along the side panel.
• Side clearance of 1/2 inch plus 0.1 inch and minus 0 inch on each side sets the target fit between drawer and cabinet, giving a defined clearance window that supports consistent slide performance.

Side Mount Installation And Fit Details

The Knape and Vogt 8655FMB 22 uses a side clearance of 1/2 inch plus 0.1 inch and minus 0 inch on each side, which sets a clear tolerance range when sizing drawer widths relative to the cabinet opening. A slide height of 2 inches affects the vertical placement of mounting screws along the drawer and cabinet sides, guiding where to mark lines on the drawer box. The 32 mm pattern indicated on the slide supports layouts that already follow 32 mm system boring, tying slide locations to predrilled rows. The recommended fasteners are #7 x 1/2 inch Phillips pan head, which directs installers toward a screw size and head style that suits the slide holes. The zinc finish aligns with the Available finish: Zinc detail, matching projects where a zinc-coated slide is preferred in cabinet interiors.

Using This 8655 Side Mount Slide In Workflows

Where The 8655FMB 22 Slide Works Best

The 22 inch 140LB SOFTCLOSE OVERTRAVEL SLIDE designation places this 8655FMB 22 in drawer runs where both soft-close and extra reach matter for everyday cabinet use. The overtravel of 1 inch lets drawers extend slightly beyond the cabinet front, which becomes useful on deeper cases where the rear of the drawer might otherwise be partially hidden. In Side Mount Drawer Slides applications, the unhanded layout means the same component mounts on either left or right, streamlining inventory on multi-drawer runs. The 32 mm Pattern: Yes reference lines up with cabinet systems drilled on the 32 mm grid, helping the slide fit into established production or shop jigs. The butterfly disconnect lever gives a defined disconnect point so drawers can be separated from the cabinet member for jobsite handling or shop finishing work.

Details That Support Repeatable Slide Results

The side clearance of 1/2 inch plus 0.1 inch and minus 0 inch each side ties drawer width directly to cabinet opening measurements, allowing installers to base drawer sizing on fixed tolerances. A 2 inch slide height points to how much vertical real estate the slide occupies on the drawer side, helping avoid conflicts with drawer bottom grooves or under-mount components. The recommended #7 x 1/2 inch Phillips pan head fasteners fit the slide recommendations, supporting bite into cabinet material without overextending through side panels. The zinc finish works with interior cabinet environments that use zinc-coated metal parts for consistent appearance around hinges and slides. Being made in USA, as stated in the web description, supports projects where domestic manufacturing is a selection criterion for hardware choices.

Common Questions About This 22 Inch Slide

Selecting This Slide For Your Next Cabinet Run

The Knape and Vogt 22 inch soft close drawer slides 8655 Series, model 8655FMB 22, combine 22 inch length, soft-close, and 1 inch overtravel to support accessible drawers. The 140LB SOFTCLOSE OVERTRAVEL SLIDE description and side mount format position it for cabinet runs that need defined side clearance, 2 inch slide height, and a zinc finish. For projects built around Side Mount Drawer Slides and 32 mm Pattern: Yes layouts, this made in USA slide offers a clearly defined set of mounting and fit parameters for repeatable casework.