Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Meadow pull 256mm polished chrome describes a Berenson Meadow Series cabinet pull with a 10-1/16 inch center to center drilling, so it spans wider drawer fronts or doors while aligning with a common hole spacing for straightforward layout on larger cabinetry. The 11-11/16 inch overall length gives this pull a long, continuous gripping surface, which helps when opening tall pantry doors or wide drawers under counters. Its 1-3/8 inch projection sets the hand off the face of the door or drawer, giving clearance for fingers while keeping the profile tight to the cabinet face. A 1/2 inch base diameter at each end provides a defined footprint on the surface, which helps visually anchor the pull on framed or frameless cabinet designs. The 11/16 inch width balances well with the length, so the pull reads as slim but still substantial across transitional kitchen and bath layouts.
The 10-1/16 inch center to center measurement defines the distance between mounting holes, so it guides drilling on new cabinet faces or aligning with existing holes during a hardware changeout. With an overall length of 11-11/16 inches, there is visible bar past each mounting point, which helps proportion the pull on tall or wide fronts. The 1-3/8 inch projection sets how far the pull stands out from the door or drawer face, influencing how fingers wrap behind the bar on thicker fronts. A 1/2 inch base diameter localized at each end concentrates contact against the surface, which keeps the footprint controlled on narrow rails or shaker-style frames. The 11/16 inch width through the grip area balances the long length, which aids comfort when grabbing the pull from different angles around a kitchen or work area.
The Meadow Series label places this pull within Berenson's decorative hardware line, which positions it for cabinet doors and drawers in kitchens, baths, and built-ins where a coordinated look is needed. Its transitional style bridges simple modern fronts and more detailed profiles, so it can be specified on flat-panel doors or recessed-panel frames without visual conflict. The 10-1/16 inch center to center dimension suits wider fronts, making it appropriate for large drawers under cooktops, pantry doors, or long utility cabinets. At 11-11/16 inches overall length, the pull creates a strong horizontal or vertical line, which can visually align multiple doors in tall banks. The polished chrome finish reflects nearby surfaces, which lets it pick up colors from surrounding materials and integrate with chrome faucets or appliance handles in the same room.
The clearly defined 10-1/16 inch center to center spacing provides a fixed reference point for jigs or templates, which helps repeat hole placement consistently across many cabinet fronts. With a 1-3/8 inch projection, the pull establishes a predictable stand-off from the surface, which matters when aligning hardware around adjacent doors or near walls where hand clearance is needed. The 11/16 inch width and 1/2 inch base diameter combine to set the visual weight of the pull against the cabinet, supporting even reveals when used side by side on drawer stacks. Because the material is aluminum, each pull contributes modest weight to the door or drawer front, which is useful when planning for soft-close slides or hinges on large pieces. The polished chrome finish, paired with the precise Meadow Series profile, helps installers and fabricators deliver a consistent appearance across multiple units on the same job.
The Berenson 2297-4026-P pull has a 10-1/16 inch center to center, 11-11/16 inch overall length, 1-3/8 inch projection, 11/16 inch width, and 1/2 inch base diameter for balanced cabinet mounting.
The 10-1/16 inch center to center sets a consistent hole spacing, which supports aligned drilling across multiple wide drawers or doors for a uniform hardware layout.
This Meadow pull belongs to Berenson's Meadow Collection and is classified as transitional style, which suits both contemporary and traditional cabinet designs on the same project.
This cabinet pull is made from aluminum with a polished chrome finish, giving a light yet solid feel and a reflective surface that coordinates with common chrome fixtures.
The Meadow Series 256mm pull is used on cabinet doors and drawers, especially wider fronts, where its long length and transitional styling support a coordinated decorative hardware layout.
The 1-3/8 inch projection sets the bar out from the cabinet face, creating finger clearance behind the pull so doors and drawers can be gripped comfortably from different angles.
The Berenson Meadow Series 10-1/16 inch center to center aluminum pull in polished chrome offers defined dimensions and a transitional profile, which support consistent cabinet hardware layout across kitchens, baths, and built-ins. With 11-11/16 inch overall length, 1-3/8 inch projection, 11/16 inch width, and a 1/2 inch base diameter, it provides predictable sizing for drawings and field installation. For projects using Meadow Collection hardware or aiming for polished chrome accents, this 2297-4026-P pull aligns cabinet doors and drawers under one coordinated design choice.
Sold In: 1 Each
