Berenson Meadow Series Verona Bronze 17-5/8" (448 mm) Center to Center Appliance Pull, -2301-40VB-P

Meadow Appliance Pull 448mm Center To Center Use

Meadow appliance pull 448mm center to center describes a Berenson Meadow Series appliance pull designed for larger cabinet and appliance fronts. The 17-5/8 inch center to center drilling spreads the load across a wide span, which helps when operating tall doors or heavier appliance panels. Its 19-1/4 inch overall length gives a generous gripping area, so hands have room even when someone is wearing work gloves. The pull is made from aluminum, keeping weight down on the panel while still providing a solid feel in use. A Verona Bronze finish presents a darker, transitional look that works between traditional and contemporary jobs. As a piece of decorative hardware in the appliance pulls class, it serves as the primary handling point on appliance fronts where a longer pull is preferred for leverage.

Key Verona Bronze Appliance Pull Details

• The 17-5/8 inch center to center layout aligns with common appliance pull boring patterns, which simplifies layout on wide doors and helps keep drilling consistent across a run of fronts.
• The 19-1/4 inch overall length gives extra bar beyond the mounting holes, offering more hand room at the ends and making the pull easier to grab from different angles on tall installations.
• The 1-1/4 inch projection holds the gripping surface out from the face, creating clearance for fingers behind the pull so users can get a secure hold without rubbing the door surface.
• The 25/32 inch width provides a stable gripping face, giving the hand a broader contact area that feels more secure when pulling heavier appliance panels or large cabinet doors.
• The 17/32 inch base diameter concentrates the mounting footprint while still covering the drilled holes, which supports a clean look around each mounting point on the panel.
• The Verona Bronze finish delivers a dark, warm tone that coordinates with other Verona Bronze hardware, helping maintain a consistent visual line across all handles and pulls on the project.

Installation Fit For 17-5/8 Inch Appliance Pulls

This Berenson Meadow Series pull uses a 17-5/8 inch center to center dimension, so hole drilling follows that specific spacing along the cabinet or appliance front. The pull is designed with a 1-1/4 inch projection, which sets how far the bar stands off the surface, affecting both clearance and the feel when grabbing it. Its 17/32 inch base diameter gives each footing a defined bearing point on the door, which matters when aligning the pull parallel to nearby edges. A 25/32 inch bar width defines the front profile, so installers know how much visual weight the pull adds along appliance fronts, especially when lining several units on adjacent doors.

Using This Berenson Meadow Series Appliance Pull

Where This Meadow Series Pull Works Well

The pull belongs to the Berenson Meadow Series, placing it within a coordinated line of decorative hardware for doors and drawers. As an appliance pull in the decorative hardware and moldings handles and pulls category, it is suited to larger fronts where an extended handle is preferred. The 17-5/8 inch center to center spacing suits wider panels, such as those on appliance fronts or tall pantry doors, where spread mounting helps distribute pulling forces. With an overall length of 19-1/4 inches, the pull spans a substantial section of the panel, which helps visually anchor tall or wide doors. The Verona Bronze finish ties into jobs using darker metal tones, helping unify panels, drawers, and appliances under one finish choice.

Details That Support Repeatable Mounting Results

The aluminum material gives the pull a lighter body compared to many solid metal options, which reduces added weight on large doors while still offering a firm gripping bar. Its 1-1/4 inch projection is defined, so installers know the clearance behind the handle when planning around adjacent walls or neighboring doors. The 25/32 inch width and 17/32 inch base diameter provide clear reference dimensions for layout, aiding in consistent positioning relative to door edges and rails. The defined 17-5/8 inch center to center spacing allows templates or jigs to be set for repeat drilling, which helps maintain straight, level lines across multiple doors. The Verona Bronze finish on aluminum offers a coordinated surface that presents uniformly on every pull bearing the 2301-40VB-P part number, which supports consistent appearance across replacements or additions.

Common Questions About Meadow Appliance Pull 448mm

Selecting This Verona Bronze Appliance Pull Today

The Berenson Meadow Series Verona Bronze 17-5/8 inch center to center appliance pull brings a defined 448 mm drilling pattern, a 19-1/4 inch overall length, and a 1-1/4 inch projection to larger fronts. Its aluminum construction with a Verona Bronze finish aligns with transitional designs where a darker metal tone is preferred. For projects calling for the 2301-40VB-P part number, this pull provides a consistent look and dimensional standard across doors and appliance panels. Use these verified dimensions and finish details to match this pull to the fronts and layout planned for the job.