Berenson Metro Polished Copper Pull For Cabinets

Berenson Metro polished copper pull is a contemporary cabinet handle designed for jobs that call for a 6-5/16 inch center to center layout. This fixed drilling dimension lets installers line up with existing 160 mm hole patterns on doors and drawers. The pull is made from zinc, providing a metal body that supports typical cabinet use in kitchens, baths, and built-ins. A polished copper finish gives the pull a bright, reflective surface that coordinates with matching copper-color decorative hardware on the same run. The listed 6-11/16 inch length defines the overall span, helping with planning for drawer fronts, narrow rails, or tight groupings. A 1-3/8 inch projection sets how far the pull stands off the face, creating consistent clearance for fingers while staying compact on shallow cabinets. The Berenson Metro Series and part number 4182-10PC-P identify this pull for repeat orders and matching hardware layouts.

Key Metro Series Pull Details For Projects

• The 6-5/16 inch (160 mm) center to center dimension sets the screw spread, which helps align drilling patterns on cabinet fronts and supports straightforward replacement of pulls with the same measurement.
• The 6-11/16 inch overall length defines the tip-to-tip span, which matters when laying out multiple pulls on wide drawers or keeping clear of panel edges and neighboring hardware.
• The 1-3/8 inch projection controls how far the pull stands off the door or drawer face, giving consistent finger clearance while keeping the handle close enough for tight walkways and narrow cabinet runs.
• The 7/16 inch width provides a slim profile along the grip, which influences the visual line on contemporary cabinets and supports a clean, modern appearance.
• The 3/8 inch base diameter at each post marks the footprint on the surface, which helps when covering existing screw marks and when aligning pulls on narrow stiles or rails.
• The polished copper finish sets the color and surface sheen, which helps coordinate with other polished copper decorative hardware and establishes a consistent look across the installation.
• The zinc material defines the pull body, which supports typical cabinet handle use while keeping weight and handling familiar for installers accustomed to metal pulls.

Installation Dimensions For Metro Cabinet Pull Fit

This Metro Series pull uses a 6-5/16 inch center to center drilling dimension, so screw holes are laid out on a 160 mm spread along the cabinet face. That fixed spacing lets installers match common 160 mm patterns on existing doors or new layouts. The 3/8 inch base diameter indicates the contact area at each mounting point, which affects how much of any prior finish marks or indentations the pull can cover. With a 1-3/8 inch projection, the pull stands off the surface at a predictable distance, supporting consistent hand clearance across multiple cabinet faces. The 6-11/16 inch overall length and 7/16 inch width combine to define the footprint, simplifying template use and visual alignment across doors, drawer fronts, and panel sections. The 8-32 x 1 inch screw size listed for this pull defines the thread and length to match the handle body during installation.

Using The Berenson Metro Pull In Cabinet Work

Where The Metro Series 160mm Cabinet Pull Fits

The Berenson Metro Series 6-5/16 inch center to center polished copper pull is designed for cabinet doors and drawer fronts that can accept a 160 mm screw spread. In kitchen, bath, or storage cabinetry with contemporary styling, the slim 7/16 inch width gives a streamlined look along rails and drawer faces. The 6-11/16 inch overall length suits medium to wider fronts, providing enough grip area while maintaining balanced proportions on typical base and wall cabinets. The 1-3/8 inch projection positions the hand away from the door or drawer face, which is useful on fronts with deeper profiles or applied moldings that sit near the grip area. The polished copper finish adds a bright metallic color that can coordinate with other polished copper decorative hardware in the same room or furniture build.

Details That Support Repeatable Cabinet Install Results

The defined 6-5/16 inch (160 mm) center to center dimension on this Metro Series pull supports repeatable drilling across a project, since every pull shares the same mounting spread. That fixed spacing also assists when replacing older hardware that already uses a 160 mm layout, reducing layout changes during upgrades. The 3/8 inch base diameter at each post sets a known bearing area on the surface, which is helpful when using drilling templates or jigs that reference post size. With a 6-11/16 inch overall length, installers can plan edge distances and spacing between multiple pulls on wide drawers using consistent measurements. The 1-3/8 inch projection keeps the gripping area uniform from cabinet to cabinet, so users experience the same reach and clearance at every door and drawer. The zinc construction and polished copper finish define the pull body and surface, which allows hardware schedules to specify matching materials and finishes throughout a job.

Common Questions About This Metro Cabinet Pull

Selecting This Metro Pull For Your Next Job

The Berenson Metro polished copper pull with 6-5/16 inch (160 mm) center to center drilling gives installers a clearly defined layout for cabinet doors and drawers. With a 6-11/16 inch length, 1-3/8 inch projection, and slim 7/16 inch width, this handle provides predictable dimensions for planning runs across kitchen, bath, or storage cabinets. The zinc body and polished copper finish match projects calling for contemporary copper-tone decorative hardware. When specifying by part number 4182-10PC-P, it is straightforward to align this pull with other Berenson Metro Series components on the same job.