PRO50 Series Rear Mounting Sockets, Right

PRO50 Series Right Rear Mounting Socket Use

PRO50 series rear mounting socket right is a Pro Value Series drawer slide accessory designed as a right-hand rear socket for PRO50 series slides. This socket supports the rear of the slide, which helps stabilize the drawer slide system at the cabinet back. As a rear mounting part, it positions the slide correctly at the back wall so the drawer slide stays aligned with the front mounting point. The manufacturer part number EUSKT-1-R identifies this specific right-hand socket, which lets installers match it to the correct side when planning a slide layout. Classified under drawer slides accessories, it serves as a dedicated mounting point rather than a general-purpose bracket, so the slide seating is repeatable from cabinet to cabinet. Using a defined right-hand part separates left and right locations, which simplifies layout when multiple drawers share the same cabinet run.

Drawer Slide Rear Socket Details That Matter

• The socket can add up to 57 mm, or 2-1/4 inches, to the length of the slide, which lets the slide reach a rear mounting surface that sits farther back in the cabinet.
• By extending the effective slide length up to 57 mm, the socket helps bridge gaps between the front mounting position and the cabinet back, which is useful when cabinet depths vary.
• As a right-hand rear socket for PRO50 series slides, the part keeps the slide located on the correct side, which supports consistent drawer tracking along the cabinet run.
• Being part of the Pro Value Series, this socket aligns with that series of drawer slides and accessories, which helps keep slide components standardized across a project.

Rear Socket Fit For PRO50 Drawer Slides

This right-hand rear socket is specified for PRO50 series slides, so it works in applications where that slide series is installed and needs a rear support point. Because it can add up to 57 mm, or 2-1/4 inches, to the slide length, it lets installers engage the cabinet back even when the cabinet interior depth exceeds the nominal slide length. That added reach supports layouts where the cabinet back is recessed relative to the front, helping the slide run straight from front to rear. Using a dedicated right-hand rear part also keeps the slide seated on the correct side of the drawer, which supports smoother operation when paired with the matching left-hand component.

Using The PRO50 Right Rear Socket In Cabinets

Rear Mounting Socket Placement In Drawer Cabinets

The PRO50 series right-hand rear mounting socket is applied at the back of the cabinet on the right side where PRO50 series slides are used. As a rear socket, it provides a defined termination point for the slide, supporting the slide at the cabinet back rather than relying only on the front attachment. With the ability to add up to 57 mm, or 2-1/4 inches, to the slide length, it allows the slide to reach a deeper cabinet back without changing the base slide size. This extra reach is especially useful where cabinet interiors differ slightly in depth, because the socket can take up that variation while still locating the slide in the same horizontal line with the front mounting point.

Why PRO50 Right Rear Socket Specs Support Alignment

The designation as a right-hand rear socket means this part is intended specifically for the right side of the cabinet, which reduces orientation mistakes when installing multiple drawers. Using the manufacturer part number EUSKT-1-R for the right side provides a clear identifier that can be matched across drawings and parts lists, supporting repeatable installations. Because the socket belongs to the Pro Value Series drawer slides accessories category, it is designed to work in the same ecosystem as PRO50 series slides, so the geometry of the rear support matches the slide profile. The capability to extend the slide length by up to 57 mm lets installers keep a consistent slide model while adapting to deeper cabinets, which helps maintain uniform drawer hardware across different cabinet runs.

Common Questions About This PRO50 Rear Socket

Choose This Right Rear Socket For PRO50 Slides

The PRO50 series right-hand rear mounting socket gives PRO50 drawer slides a defined rear support point on the cabinet right side. Its ability to add up to 57 mm, or 2-1/4 inches, to slide length helps adapt a standard slide choice to deeper cabinet interiors. The dedicated right-hand design and EUSKT-1-R part number make it straightforward to call out and repeat on drawings and orders. For PRO50 slide runs that need reliable rear support on the right side, this socket offers a focused mounting solution.