Aventos HK-Top Tip-On Lift Mechanism For Upward Doors

Aventos HK-Top Tip-On lift mechanism is a Blum, Inc. lift system designed for cabinet fronts that open upward, so the front moves up and away and gives a clear view into the cabinet interior. This upward-opening action enables comfortable and ergonomic access to storage items because the front is positioned above the work zone instead of swinging into it. The mechanism is part of the BLUM Aventos Lift Systems product class, which means it is built specifically for controlled lifting of cabinet fronts rather than general hinges. A power factor range of 150 to 450 ties the mechanism to specific combinations of cabinet height and door weight, helping installers match lift strength to the front so the motion feels balanced. The mechanism is identified by manufacturer part number 02855682, giving shops a precise reference for ordering or repeat installations.

Lift System Details That Support Cabinet Projects

• Since the cabinet doors open upwards, AVENTOS provides an excellent view into the cabinet interior, which helps during layout and daily use because items remain visible and accessible while the front is raised above head or shoulder level.
• A red self-positioning mechanism with locating template eliminates complicated installation, so mounting positions are set by the hardware itself and saves layout time when repeating the same configuration across multiple cabinets.
• Integrated opening angle adjustment between 75 degrees and 107 degrees lets the installer fine-tune how far the front opens, which matters where ceiling height, lighting, or adjacent cabinets limit travel and a consistent stop point is needed.
• Cabinet height from 10 inches (250 mm) to 24 inches (610 mm) defines the usable height range for this mechanism, allowing planning of wall cabinet sizes that will lift correctly within the specified power factor.
• Interior cabinet depth minimum of 7-3/8 inches (187 mm) states the space required inside the case, which helps verify that the lift arms can operate without contact with stored items or back panels during opening.

Installation And Power Factor Setup Considerations

The red self-positioning mechanism with locating template eliminates complicated installation by defining consistent mounting geometry on the cabinet side, so case drilling can be repeated accurately from cabinet to cabinet. Integrated opening angle adjustment between 75 degrees and 107 degrees is built into the mechanism, so the final stop position is set on the hardware instead of relying on case construction tolerances. Cabinet height from 10 inches (250 mm) to 24 inches (610 mm) ties directly into power factor sizing, so installers can calculate needs based on actual cabinet dimensions. The power factor is defined as cabinet height multiplied by door weight, giving a single value that can be compared to the stated 150 to 450 range for selecting this mechanism in a layout.

Using This Aventos Lift System In Real Projects

Upward-Opening Cabinets With Defined Clearances

Since the cabinet doors open upwards, AVENTOS provides an excellent view into the cabinet interior, which suits wall cabinets where users want the entire shelf span visible when the front is raised. Cabinet height from 10 inches (250 mm) to 24 inches (610 mm) sets the dimensional window where this mechanism operates as intended, so wall and over-counter cabinets in that range can be planned around its lift characteristics. An interior cabinet depth minimum of 7-3/8 inches (187 mm) indicates that standard-depth wall cabinets typically have enough room for the arm to move, so the mechanism can function without the arm colliding with stored containers. The arm has a built in safety feature to prevent opening and closing, which adds a layer of control during operation and can help avoid sudden movement while users are in front of the cabinet.

Max front weight 39 lb for two lift mechanisms links load capacity directly to a specific configuration, so designers can assign materials and hardware to stay within that front weight when planning wide or tall doors. When using a third lift mechanism, a power factor increase of up to 50 percent is possible according to the description, which allows heavier or taller fronts to be supported by adding another lift point in the design. Blum recommends for wide cabinets that an additional lift system should be attached to the center panel to prevent the middle of the front from sagging when open, so wide multi-section fronts can maintain alignment across their width. Determining power factor as cabinet height multiplied by door weight provides a straightforward calculation that connects door construction choices with the appropriate number of mechanisms for consistent motion.

Adjustment, Safety Features, And Repeatable Motion

Integrated opening angle adjustment between 75 degrees and 107 degrees lets installers set how high the front lifts, which is useful when working under soffits or near lighting where a precise stop point prevents interference. The arm has built in safety feature to prevent opening and closing, which helps control movement during adjustments or during everyday use when users move under the raised front. The red self-positioning mechanism with locating template eliminates complicated installation, so alignment is driven by the hardware and helps achieve uniform action when many cabinets share the same layout. Cabinet height from 10 inches (250 mm) to 24 inches (610 mm) and interior cabinet depth minimum of 7-3/8 inches (187 mm) together describe the working envelope, so once those conditions are met, the lift motion can be repeated confidently across a run of cabinets.

Common Questions About This Aventos HK-Top Lift

Selecting This Aventos HK-Top Mechanism For Your Job

The Aventos HK-Top Tip-On lift mechanism from Blum, Inc. combines an upward-opening action with integrated opening angle adjustment between 75 degrees and 107 degrees, giving control over both motion and final position. With a defined power factor range of 150 to 450, a cabinet height window from 10 inches (250 mm) to 24 inches (610 mm), and an interior cabinet depth minimum of 7-3/8 inches (187 mm), it ties hardware choice directly to case dimensions. The max front weight of 39 lb for two lift mechanisms and the option to increase power factor by up to 50 percent when using a third mechanism help align door construction with the lift layout. For projects that match these parameters, this Aventos HK-Top Tip-On lift mechanism offers a clearly defined spec path from design through installation.