Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Blow Gun Chip Guarding Shield S-160CHIP is a Milton Industries chip deflector designed to attach to 6mm blow gun nozzles, so it redirects debris blowback away from the user while air-cleaning parts or work areas. The clear shield color lets you see the surfaces you are clearing with your blow gun, which supports accurate cleaning around delicate components and tight spots. The lightweight polycarbonate/plastic construction keeps the shield easy to handle on long air-cleaning tasks, reducing hand fatigue compared to heavier guards. The shield is described as OSHA-compliant, so it supports using Milton blow guns within common shop safety expectations where debris control is required. This shield is suitable for home garage, professional auto shop, industrial, heavy-duty, farming, and agricultural use, giving one guard that works across many compressed air cleaning setups.
This Milton Industries shield attaches by sliding it onto the blow gun nozzle, so installation is a straightforward motion along the 6mm nozzle without extra adapters. After sliding the shield into position, tightening the screw secures it, which holds the guard in place during air blasts and movement around the workpiece. Removal uses the same interface in reverse: loosening the screw located on the side of the shield and pulling it off the blow gun nozzle, which allows quick changeover when moving the gun into spaces where a guard is not required. This slide-and-screw method suits repetitive shop work, because the process is simple enough for frequent on/off adjustments around different tasks and fixtures.
This chip guarding shield is compatible with Milton blow guns and most 6mm blow gun nozzles, so it supports a wide range of compressed air cleaning setups built around that nozzle size. In a home garage, the shield helps redirect debris and liquid when blowing off vehicle parts or yard equipment, limiting blowback toward the operator during close work around brackets and housings. In a professional auto shop, its clear construction lets technicians see brake components, engine bays, and undercar parts while deflecting chips and grime, which is useful when cleaning around sensitive surfaces. In industrial and heavy-duty environments, the lightweight polycarbonate/plastic shield adds debris control to high-frequency blow-off tasks, so operators can move quickly along conveyor lines or fixtures without changing their viewing angle. On farming and agricultural equipment, the shield helps manage dust and residue blowback around bearings and linkages, especially when cleaning in tight, irregular spaces where deflection path matters.
The Milton S-160CHIP design centers on a 6mm blow gun nozzle interface, so once set up, the guard seats in the same position each time it is slid on and the screw is tightened, giving a consistent deflection angle relative to the nozzle. The rubber inset that provides a tight seal around the nozzle keeps the airflow directed inside the shield, which improves predictable chip and liquid trajectory compared to a loose guard. Because the shield is clear, operators can visually confirm where the air stream is impacting while it deflects debris, supporting repeatable cleaning passes along edges and machined faces. The OSHA-compliant description signals that the shield geometry and function are oriented toward controlling blowback around the operator, which is important for shops aiming for consistent safety practices during daily air line use. Together, these details support a workflow where the blow gun behaves the same way each time the shield is mounted, reducing trial-and-error on every setup change.
The Blow Gun Chip Guarding Shield S-160CHIP fits Milton blow guns and most 6mm blow gun nozzles, so it serves many tools that share this nozzle size.
The Blow Gun Chip Guarding Shield S-160CHIP slides onto the blow gun nozzle, then a screw is tightened to secure it, so mounting uses a simple slide-and-clamp action.
The Blow Gun Chip Guarding Shield S-160CHIP is removed by loosening the screw on the side of the shield and pulling it off the blow gun nozzle, allowing quick changeover.
The Blow Gun Chip Guarding Shield S-160CHIP is a lightweight polycarbonate/plastic shield, so it adds minimal weight to the blow gun while providing a rigid guard surface.
The Blow Gun Chip Guarding Shield S-160CHIP is described as OSHA-compliant, so it supports debris control requirements common in many shop environments.
The Blow Gun Chip Guarding Shield S-160CHIP is specified for home garage, pro auto shop, industrial, heavy-duty, farming, and agricultural applications using blow guns.
The Milton Industries Blow Gun Chip Guarding Shield S-160CHIP is built for 6mm blow gun nozzles, so it aligns with many Milton blow guns and similar tools already in air line setups. Its clear, lightweight polycarbonate/plastic construction and rubber inset seal combine to redirect debris, liquid, and blowback while you maintain a direct view of the work surface. For shops handling home garage to industrial and agricultural tasks, this OSHA-compliant chip deflector offers a focused way to add debris control around existing blow guns. Choose this shield when a 6mm nozzle interface and visual access to the cleaning area are priorities in your workflow.
Sold In: 1 Each