Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
30 foot 1/4 ID polyurethane rekoil hose delivers a compact, retracting air line that stays out of the way while you work, which helps keep spray and air tool setups more organized in busy shops or job sites. This Milton Industries air hose assembly uses polyurethane hose material, so the line resists abrasion as it moves across typical shop surfaces, supporting consistent performance in regular use. The 30 foot length provides reach for most bench and booth layouts, giving room to position spray guns or tools without dragging hose across workpieces. A 1/4 hose inside diameter matches common air tool and spray equipment requirements, helping maintain expected airflow in typical setups. This hose is built as a re-koil style, so it retracts toward its resting position when slack, which reduces hose lying across walkways and working areas.
This polyurethane re-koil hose is described as perfect for connecting to overhead air lines to keep the hose off the floor, so it pairs well with ceiling or high-wall drops in spray and tool stations. The hose is assembled with re-usable, full flow 1/4 MNPT swivel fittings on both ends, which allows the hose ends to rotate during use and helps avoid twisting and kinking at the connection points. Full flow 1/4 MNPT swivel fittings support maintaining air volume through the ends, which is important when feeding spray guns or air tools that depend on consistent pressure. The maximum working pressure of 125 PSI at 70 degrees Fahrenheit matches many shop compressors, so the hose can serve general compressed air tasks within that pressure range.
This 30 foot polyurethane re-koil hose is described as perfect for connecting to overhead air lines, so it fits installations where drops come from ceilings or high walls above benches and booths. By staying elevated and recoiling, the hose helps keep the working area near floors and workpieces clearer, which supports smoother movement around cabinets, panels, or furniture during spraying and assembly. The re-koil behavior means the hose contracts toward the air drop when tension is released, reducing trailing hose length in walkways and underfoot zones. With a 30 foot reach, the hose provides coverage across typical spray booths or work cells while still returning toward its origin when slack. In setups where multiple tools share an overhead air manifold, this layout can help distinguish each station by keeping hose runs neater.
The hose uses re-usable, full flow 1/4 MNPT swivel fittings on both ends, so technicians can rotate tools or couplers without fighting hose twist at the connection, which supports quicker positioning of spray guns and air tools during adjustments. Because the fittings are 1/4 MNPT, they match a common interface in compressed air systems, helping the hose integrate into existing couplers and manifolds that use this thread size. The full flow design helps reduce restriction right at the ends, which matters when stable pressure is wanted at the gun or tool for repeatable finish quality or tool performance. A maximum working pressure of 125 PSI at 70 degrees Fahrenheit gives a clear upper operating limit for air supply. The working temperature range of -50 degrees Fahrenheit to 180 degrees Fahrenheit means the hose remains usable across cold storage-style areas or warmer finishing rooms, supporting year-round use where ambient conditions vary.
This air hose assembly is 30 foot long, providing reach across typical benches or spray booths while remaining manageable for routing from overhead air lines.
The hose inside diameter is 1/4 inch, matching common air tool and spray equipment setups that are built around 1/4 inch air lines for airflow.
The hose uses re-usable, full flow 1/4 MNPT swivel fittings on both ends, allowing rotation at the connections to avoid twisting and kinking during tool movement.
This polyurethane re-koil hose has a maximum working pressure of 125 PSI at 70 degrees Fahrenheit, aligning with many shop compressor pressure settings.
The working temperature range is -50 degrees Fahrenheit to 180 degrees Fahrenheit, allowing operation in both colder and warmer shop or jobsite environments.
The polyurethane re-koil hose is described as perfect for connecting to overhead air lines because it recoils and helps keep hose runs off the floor and out of walkways.
This 30 foot 1/4 ID polyurethane rekoil hose from Milton Industries combines a recoiling design, abrasion-resistant polyurethane construction, and re-usable full flow 1/4 MNPT swivel fittings on both ends, so overhead air lines can stay neater while feeding spray guns or air tools. With a maximum working pressure of 125 PSI at 70 degrees Fahrenheit and a broad working temperature range from -50 degrees Fahrenheit to 180 degrees Fahrenheit, this air hose assembly fits a wide range of woodshop and finishing room conditions. Choose this hose when a compact overhead air connection is needed to keep hose off the floor and maintain consistent airflow to tools.
Sold In: 1 Each